Opens in a new tab

MCP100T-315I/TT

Voltage supervisor, 3.15V threshold, 140ms delay, push-pull reset, SOT-23

5248

Effective Inventory

Image for reference only

Manufacturer Part:

MCP100T-315I/TT

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

MCP100T-315I/TT is a voltage supervisor/reset IC with 3.15V threshold, active-low reset, open-drain output, SOT-23-3 package, industrial temperature range.

Key Specifications

Function Voltage supervisor/reset
Threshold Voltage 3.15V
Reset Output Active-low, open-drain
Supply Voltage 1V to 5.5V
Reset Timeout 200 ms typical
Package SOT-23-3
Temperature Range -40°C to +85°C

Features

  • Precision 3.15V voltage threshold
  • Active-low open-drain reset output
  • 200ms reset timeout period
  • SOT-23-3 tiny package
  • Industrial temperature range

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: MCP100T-315I/TT Product Introduction

MCP100T-315I/TT is a voltage supervisor/reset IC with 3.15V threshold, active-low reset, open-drain output, SOT-23-3 package, industrial temperature range.

Working Principle: MCP100T-315I/TT Working Principle

The MCP100T-315I/TT is a Microchip voltage supervisor or operational amplifier. The voltage supervisor monitors a supply rail against a precision threshold using an internal voltage reference and comparator. A programmable delay prevents false resets during supply transients. The open-drain reset output supports wired-OR connection of multiple supervisors. Op-amp variants provide low-input-bias-current CMOS amplification with rail-to-rail output swing for sensor signal conditioning.

Pin Description: MCP100T-315I/TT Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is MCP100T-315I/TT used
  • Power supply monitoring and reset
  • Brownout detection
  • Sensor signal amplification
  • Low-power portable instrumentation
Alternative Models: What chips are recommended as replacements for MCP100T-315I/TT
Model Manufacturer Key Difference
TLC3702 TI Dual comparator, similar function
MAX809 Maxim Voltage supervisor alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1