Opens in a new tab

MCP2561-E/SN

CAN FD transceiver, 8Mbps, ISO 11898-2, SOIC-8, standby 10uA, 125C, MCP2551 upgrade

6129

Effective Inventory

Image for reference only

Manufacturer Part:

MCP2561-E/SN

Package:

SOIC-8 (4.90 x 3.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP2561-E/SN from Microchip is a CAN FD transceiver in a SOIC-8 package. Compliant with ISO 11898-2:2016, it supports CAN and CAN FD protocols at up to 8Mbps data rate with 5V tolerant I/O and standby mode.

Key Specifications

Protocol CAN 2.0B and CAN FD
Data Rate Up to 8 Mbps (CAN FD)
Bus Voltage -40V to +40V (common mode)
Supply Voltage 4.5 V to 5.5 V
Standby Current 10 uA (typical)
Operating Temperature -40C to +125C (E suffix)

Features

  • CAN FD support at up to 8Mbps for modern automotive networks
  • ISO 11898-2:2016 compliant with improved EMC performance
  • 5V tolerant CANH/CANL bus pins for mixed-voltage systems
  • Standby mode with 10uA current and remote wake-up via bus
  • TXD dominant timeout protection against bus lock-up
  • SOIC-8 industry-standard footprint compatible with MCP2551

Applications

  • Automotive CAN and CAN FD network nodes
  • Industrial CAN bus communication
  • Building automation and HVAC control networks
  • Medical equipment inter-module communication
Product Introduction: MCP2561-E/SN Product Introduction

The MCP2561-E/SN from Microchip Technology is a CAN Flexible Data Rate (FD) transceiver in a SOIC-8 package. The device is fully compliant with the ISO 11898-2:2016 standard and supports both classical CAN (up to 1Mbps) and CAN FD (up to 8Mbps) protocols. The CAN FD capability enables faster data rates and longer payload frames (up to 64 bytes) compared to classical CAN, reducing bus utilization and improving network efficiency in modern automotive and industrial applications. The transceiver provides the physical layer interface between the CAN protocol controller and the physical bus, with differential transmit and receive capability. The SOIC-8 package is pin-compatible with the older MCP2551, providing a simple upgrade path to CAN FD. The device features standby mode with 10uA typical current consumption and remote wake-up capability via bus activity. TXD dominant timeout protection prevents permanent bus dominant state caused by a stuck TXD input. The -40C to +125C extended temperature range (E suffix) supports automotive under-hood applications.

Working Principle: MCP2561-E/SN Working Principle

The MCP2561-E/SN converts between the MCU’s digital CAN signals and the differential bus signals. (1) Transmit: When the MCU drives TXD low (dominant), the transceiver drives CANH high (~3.5V) and CANL low (~1.5V), creating a ~2V differential voltage on the bus. When TXD is high (recessive), both CANH and CANL are biased to ~2.5V (no differential voltage). (2) Receive: The differential receiver continuously monitors the CANH-CANL voltage. When the differential exceeds the threshold (~0.9V), RXD is driven low (dominant). When below the threshold, RXD is high (recessive). (3) CAN FD: During CAN FD data phases, the transceiver supports bit rates up to 8Mbps with faster edge rates while maintaining EMC compliance. The arbitration phase still uses 1Mbps or lower for backward compatibility. (4) Standby: In standby mode (STB pin high), the transmitter and main receiver are disabled, reducing current to 10uA. A low-power receiver monitors bus activity and pulls RXD low when a dominant bus state is detected, enabling remote wake-up of the MCU.

Pin Description: MCP2561-E/SN Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input (from MCU CAN controller)
2 VSS Ground Ground
3 VDD Power Supply (4.5-5.5V)
4 RXD Output Receive data output (to MCU CAN controller)
5 SHDN Input Shutdown / standby mode control
6 CANL I/O CAN bus low (differential)
7 CANH I/O CAN bus high (differential)
8 SPLIT Output Common-mode stabilization output
Application Scenarios: In which products and applications is MCP2561-E/SN used
  • Automotive CAN and CAN FD network nodes at up to 8Mbps
  • Industrial CAN bus communication with 10uA standby mode
  • Building automation and HVAC control networks with MCP2551 upgrade path
  • Medical equipment inter-module communication at 125C extended range
Alternative Models: What chips are recommended as replacements for MCP2561-E/SN
Manufacturer Part Number Package Notes
Microchip MCP2562-E/SN SOIC-8 Split pin replaced by VIO
TI SN65HVD230DR SOIC-8 3.3V CAN transceiver
NXP TJA1042T SOIC-8 CAN FD, pin-compatible
Infineon TLE7250GVIOXUMA1 SOIC-8 CAN FD, 5V/3.3V VIO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1