Opens in a new tab

MCP4921-E/SN

12-bit single-channel voltage DAC, SPI, rail-to-rail output, 2.7-5.5V, SOIC-8, AEC-Q100

2849

Effective Inventory

Image for reference only

Manufacturer Part:

MCP4921-E/SN

Package:

SOIC-8 (4.9 x 3.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP4921-E/SN from Microchip Technology is a 12-Bit Single Output Voltage DAC with SPI interface in an 8-pin SOIC package. It features rail-to-rail output, external voltage reference, and selectable unity or 2x gain output, operating from 2.7V to 5.5V with very low power consumption.

Key Specifications

Resolution 12 Bit
Channels 1
Output Type Voltage, Rail-to-Rail
Settling Time 4.5 μs
INL ±2 LSB typ
DNL ±0.75 LSB max
Supply Voltage 2.7 V to 5.5 V
Operating Current 175 μA typ
Interface SPI (20 MHz)
Package SOIC-8
Temperature Range -40°C to +125°C

Features

  • 12-bit resolution with ±0.2 LSB DNL (typical)
  • Rail-to-rail output with selectable unity or 2x gain
  • SPI interface supporting 20 MHz clock
  • External voltage reference input with multiplier mode
  • Double-buffered input registers with LDAC for synchronous update
  • Very low power consumption: 175 μA typical
  • AEC-Q100 Grade 1 qualified for automotive

Applications

  • Set point or offset trimming
  • Sensor calibration and compensation
  • Motor control feedback loops
  • Portable battery-powered instruments
  • Digitally-controlled multiplier/divider
Product Introduction: MCP4921-E/SN Product Introduction

The MCP4921-E/SN is a single channel 12-bit buffered voltage output Digital-to-Analog Converter (DAC) from Microchip Technology. It uses an external voltage reference pin and SPI interface. The device provides high accuracy and low noise performance suitable for consumer and industrial applications. The resistive string architecture ensures low DNL error and fast settling time. Double-buffered input registers allow synchronous updates using the LDAC pin. The device is AEC-Q100 Grade 1 qualified, making it suitable for automotive applications.

Working Principle: MCP4921-E/SN Working Principle

The MCP4921-E/SN uses a resistive string DAC architecture where the 12-bit digital input code selects a tap point on a resistor divider chain between VREF and ground. The selected voltage is buffered by a rail-to-rail output amplifier with selectable gain of 1x or 2x. Data is written via SPI interface with a 16-bit command word containing configuration bits (gain selection, shutdown control) and the 12-bit DAC code. The LDAC pin allows double-buffered operation for synchronous output updates. An on-chip Power-On Reset (POR) circuit ensures the DAC output starts at a known state.

Pin Description: MCP4921-E/SN Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply voltage (2.7V to 5.5V)
2 CS Input Chip select (active low)
3 SCK Input SPI serial clock input
4 SDI Input SPI serial data input
5 LDAC Input Latch DAC input (active low, synchronous update)
6 VREF Input External voltage reference input
7 VSS Ground Ground
8 VOUT Output DAC analog voltage output
Application Scenarios: In which products and applications is MCP4921-E/SN used
  • Sensor calibration and signal compensation
  • Set point or offset trimming in control loops
  • Motor control feedback and voltage adjustment
  • Portable and battery-powered instrumentation
  • Optical communication device calibration
Alternative Models: What chips are recommended as replacements for MCP4921-E/SN
Manufacturer Part Number Package Notes
Microchip MCP4922-E/SN SOIC-14 Dual channel 12-bit DAC
Microchip MCP4911-E/SN SOIC-8 10-bit version, same footprint
Microchip MCP4821-E/SN SOIC-8 12-bit with internal 2.048V reference
Texas Instruments DAC8562 VSSOP-10 12-bit dual DAC with internal ref

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1