Opens in a new tab

MCP6002-I/P

Dual rail-to-rail op-amp, 1.8-6V, 1MHz GBW, 100uA Iq, 8-PDIP

12016

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6002-I/P

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP6002-I/P from Microchip Technology is a dual general-purpose rail-to-rail I/O operational amplifier operating from 1.8V to 6.0V with 1MHz gain-bandwidth product. Packaged in an 8-pin PDIP, it is optimized for low-voltage, low-power applications.

Key Specifications

Channels 2 (Dual)
Supply Voltage 1.8V to 6.0V
Gain-Bandwidth Product 1MHz
Slew Rate 0.6V/us
Input Offset Voltage +/-3.5mV (max)
Quiescent Current 100uA per amplifier (typ)
Rail-to-Rail Input and Output
Package 8-PDIP
Operating Temperature -40 to +85 C

Features

  • Ultra-low supply voltage: 1.8V minimum
  • Rail-to-rail input and output
  • Low quiescent current: 100uA per amplifier
  • 1MHz gain-bandwidth product
  • Extended temperature range: -40C to 125C available
  • No phase reversal on input overdrive

Applications

  • Battery-powered instrumentation
  • Signal conditioning for sensors
  • Active filters in low-voltage systems
  • Portable medical devices
Product Introduction: MCP6002-I/P Product Introduction

The MCP6002-I/P is a dual general-purpose rail-to-rail I/O operational amplifier from Microchip Technology optimized for low-voltage operation from 1.8V to 6.0V. With a quiescent current of only 100uA per amplifier and 1MHz gain-bandwidth product, it is ideal for battery-powered and low-power applications. The rail-to-rail input and output capability maximizes signal dynamic range in single-supply configurations. The 8-pin PDIP package supports easy prototyping and through-hole assembly. The device features no phase reversal on input overdrive, ensuring predictable behavior in harsh environments.

Working Principle: MCP6002-I/P Working Principle

The MCP6002 uses a CMOS design with complementary input pairs (both PMOS and NMOS differential pairs) to achieve rail-to-rail input common-mode range. As the input voltage moves from ground to VDD, the input stage transitions between the PMOS pair (active near ground) and the NMOS pair (active near VDD), with both pairs active in the middle range. The output stage uses a class AB push-pull configuration with rail-to-rail output swing. The 1MHz gain-bandwidth product is set by the internal compensation capacitor. The CMOS design provides very low input bias current (typically 1pA) and low quiescent current (100uA per amplifier).

Pin Description: MCP6002-I/P Pin Definition and Functions
Pin Name Function
1 VOUTA Channel A output
2 VINA- Channel A inverting input
3 VINA+ Channel A non-inverting input
4 VSS Ground (negative supply)
5 VINB+ Channel B non-inverting input
6 VINB- Channel B inverting input
7 VOUTB Channel B output
8 VDD Positive supply (1.8-6.0V)
Application Scenarios: In which products and applications is MCP6002-I/P used
  • Battery-powered sensor conditioning with 1.8V minimum supply and 100uA current draw
  • Portable medical devices needing rail-to-rail signal range on single supply
  • Active filter design in 3.3V digital systems with rail-to-rail I/O
  • Low-voltage MCU analog front-ends with 1MHz bandwidth for signal buffering
Alternative Models: What chips are recommended as replacements for MCP6002-I/P
Model Manufacturer Key Difference
MCP6001-I/P Microchip Single channel version
MCP6004-I/P Microchip Quad channel version
LMV358 TI Dual, 2.7-5.5V, similar specs
TSV912 ST Dual, 8MHz GBW, R-R I/O

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1