Opens in a new tab

MCZ33810EKR2

8-ch automotive engine control IC, 4x injector + 4x gate driver, SPI, SOICW-32-EP

10836

Effective Inventory

Image for reference only

Manufacturer Part:

MCZ33810EKR2

Package:

SOICW-32-EP (exposed pad) (10.3 x 10.7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCZ33810EKR2 from NXP Semiconductors is an Automotive Engine Control IC with eight output channels in a 32-pin SOICW-EP package. It integrates four low-side injector drivers and four gate pre-drivers configurable for IGBT ignition or general-purpose MOSFET driving, controlled via SPI interface.

Key Specifications

Channels 8 (4 injector + 4 gate pre-driver)
VPWR Supply 4.5 V to 36 V
Injector Driver Current Limit 4.5 A max
Gate Driver Output Current 1 A
Interface SPI (3.3V / 5V logic)
Standby Current 10 μA max
Power Dissipation 1.7 W
Operating Temperature -40°C to +125°C
Package SOICW-32-EP (exposed pad)

Features

  • Quad ignition IGBT or MOSFET gate pre-driver with parallel/SPI/PWM control
  • Quad injector driver with parallel/SPI control
  • 3.3V / 5.0V SPI interface to MCU
  • Independent fault protection and diagnostics per channel
  • Spark duration timer and dwell control in IGBT mode
  • Current sense amplifier with NOMI/MAXI comparators
  • Low VPWR standby current (10 μA max)
  • Pb-free SOICW-32 package with exposed pad

Applications

  • Automotive engine control units (ECU)
  • Fuel injector driver systems
  • Ignition coil driver systems
  • General-purpose low-side MOSFET driving
  • Automotive power management
Product Introduction: MCZ33810EKR2 Product Introduction

The MCZ33810EKR2 from NXP Semiconductors (formerly Freescale) is an eight-channel output driver IC designed for automotive engine control applications. It integrates four low-side injector drivers and four low-side gate pre-drivers that can function as either ignition IGBT gate pre-drivers or general-purpose MOSFET gate pre-drivers. In IGBT mode, additional features include spark duration timer, dwell time control, and ignition coil current sensing. The device communicates with the MCU via a 3.3V/5V SPI interface and provides comprehensive fault diagnostics.

Working Principle: MCZ33810EKR2 Working Principle

The MCZ33810EKR2 operates in two main modes. In ignition (IGBT) mode, the gate pre-drivers (GD0-GD3) control external IGBTs for ignition coil driving. The feedback inputs (FB0-FB3) monitor IGBT collector voltage for spark duration timing and secondary clamp control. A current sense amplifier monitors coil current through external sense resistors, comparing it against programmable NOMI and MAXI thresholds. In general-purpose gate driver (GPGD) mode, the pre-drivers control external MOSFETs with short-circuit and open-circuit detection via drain voltage monitoring. All four injector drivers (OUT0-OUT3) are open-drain outputs with active drain clamping for inductive turn-off protection.

Pin Description: MCZ33810EKR2 Pin Definition and Functions
Pin Name Type Function
1 OUT0 Output Low-side injector driver output 0
2 FB0 Input Feedback voltage sensor 0
3 GD0 Output Gate driver output 0
4 CS Input SPI chip select (active low)
5 SCLK Input SPI clock input
6 SI Input SPI serial data input
7 SO Output SPI serial data output
8 VDD Power Digital logic supply voltage
9 OUTEN Input Output enable (active low)
10-13 DIN0-DIN3 Input Parallel control inputs for injector outputs
14-15 GD1/FB1 Output/Input Gate driver 1 / Feedback 1
16 OUT1 Output Low-side injector driver output 1
17 OUT3 Output Injector driver output 3
18 FB3 Input Feedback voltage sensor 3
19 GD3 Output Gate driver output 3
20 SPKDUR Output Spark duration timer output
21-26 VPWR/GIN0-3 Power/Input Power and gate control inputs
27-28 RSP/RSN Input Current sense resistor +/- inputs
29 MAXI Output Maximum coil current flag
30 NOMI Output Nominal coil current flag
31-32 GD2/FB2 Output/Input Gate driver 2 / Feedback 2
Pad GND Ground Ground (exposed pad)
Application Scenarios: In which products and applications is MCZ33810EKR2 used
  • Automotive engine control units (ECU)
  • Fuel injector and ignition coil driving
  • General-purpose automotive low-side switching
  • Automotive power distribution modules
  • Motor and solenoid driver systems
Alternative Models: What chips are recommended as replacements for MCZ33810EKR2
Manufacturer Part Number Package Notes
NXP MC33810EK SOICW-32-EP Non-tape-reel version
NXP MC33812 SOICW-32-EP Next-gen engine control IC
Infineon TLE8110EE DSO-36 Similar 8-channel engine driver
Renesas ISL9P8103 SSOP-36 Alternative engine control driver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1