Opens in a new tab

Home » Integrated Circuits ICs » MER1S1205SC

MER1S1205SC

1W isolated DC-DC, 12V to 5V, 1kV isolation, SMD

6233

Effective Inventory

Image for reference only

Manufacturer Part:

MER1S1205SC

Package:

SMD

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MER1S1205SC from Murata is a 1W isolated DC-DC converter converting 12V input to 5V output with 1 kV DC isolation. It is designed for distributed power architectures, providing isolated power rails for I2C, RS-485, and CAN bus transceivers.

Key Specifications

Function 1W isolated DC-DC converter
Input Voltage 12V
Output Voltage 5V
Output Power 1W
Isolation Voltage 1 kV DC
Efficiency Up to 82%
Package SMD (11.5×7.1x6mm)

Working Principle

A push-pull oscillator drives a miniature isolation transformer. The secondary voltage is rectified and LC-filtered to provide regulated 5V output. No external components are required. The 1 kV isolation rating meets IEC 60950 basic insulation requirements for SELV circuits.

Applications

  • Isolated CAN / RS-485 bus power
  • Industrial I/O module isolated supply
  • Medical equipment isolated rail
  • Distributed power architecture
Product Introduction: MER1S1205SC Product Introduction

The MER1S1205SC from Murata is a 1W isolated DC-DC converter converting 12V input to 5V output with 1 kV DC isolation. It is designed for distributed power architectures, providing isolated power rails for I2C, RS-485, and CAN bus transceivers.

Working Principle: MER1S1205SC Working Principle

A push-pull oscillator drives a miniature isolation transformer. The secondary voltage is rectified and LC-filtered to provide regulated 5V output. No external components are required. The 1 kV isolation rating meets IEC 60950 basic insulation requirements for SELV circuits.

Pin Description: MER1S1205SC Pin Definition and Functions
Pin Name Description
1 VIN 12V input
2 GND_IN Input ground
3 GND_OUT Output ground (isolated)
4 VOUT 5V output
Application Scenarios: In which products and applications is MER1S1205SC used
  • Isolated CAN / RS-485 bus power
  • Industrial I/O module isolated supply
  • Medical equipment isolated rail
  • Distributed power architecture
Alternative Models: What chips are recommended as replacements for MER1S1205SC
Model Manufacturer Key Difference
B1205S-1W Mornsun Similar 1W isolated

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1