Opens in a new tab

MPQ3324GRE-AEC1

AEC-Q100 8-channel 45V 100mA/ch LED driver, I2C, separated PWM/analog dimming, SOIC-24 EP

5420

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ3324GRE-AEC1

Package:

SOIC-24 EP (7.5 x 5.3 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MPQ3324GRE-AEC1 is a Monolithic Power Systems (MPS) AEC-Q100 qualified 8-channel, 100mA/channel LED driver with separated PWM and analog dimming plus I2C interface. It provides individual channel current control and diagnostic features for automotive exterior and interior LED lighting applications.

Key Specifications

LED Channels 8
Current per Channel 100mA (max)
LED Voltage Rating 45V
Dimming Interface I2C + separated PWM + analog
PWM Resolution 12-bit (4096 steps)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • AEC-Q100 qualified for automotive applications
  • 8-channel constant current LED driver at 100mA per channel
  • Separated PWM and analog dimming for independent brightness and color control
  • I2C interface for individual channel configuration
  • 12-bit PWM dimming resolution
  • Open LED and short LED detection per channel
  • Thermal shutdown protection with thermal warning
  • Phase-shift PWM for reduced input ripple
  • 4 address pins for up to 16 devices on one I2C bus

Applications

  • Automotive tail light and stop lamp LED control
  • Interior ambient RGBW lighting
  • Dashboard and instrument cluster backlight
  • Automotive exterior position and marker lights
  • Industrial multi-channel LED indicator arrays
Product Introduction: MPQ3324GRE-AEC1 Product Introduction

The MPQ3324GRE-AEC1 is an MPS AEC-Q100 qualified 8-channel, 100mA/channel LED driver with I2C interface and separated PWM plus analog dimming. Each channel provides independent 12-bit PWM resolution and 7-bit analog current control, enabling precise brightness and color mixing for automotive LED lighting. The device features open/short LED detection per channel, thermal warning and shutdown, and phase-shift PWM for reduced input ripple. Available in SOIC-24 EP package, it is ideal for automotive tail lights, ambient lighting, and dashboard backlights.

Working Principle: MPQ3324GRE-AEC1 Working Principle

The MPQ3324GRE-AEC1 operates as an 8-channel constant current sink LED driver. Each channel uses a low-side N-channel MOSFET to regulate the LED current through an internal current regulation loop. The I2C interface allows individual channel current programming with 7-bit analog resolution (128 steps) and 12-bit PWM duty cycle control (4096 steps). The separated dimming architecture means the analog current and PWM duty cycle are independently controlled, providing 128 x 4096 = 524,288 effective dimming steps per channel. Phase-shift PWM distributes the switching events across channels to minimize peak input current. Open LED detection monitors each channel’s voltage to identify disconnected strings, while short LED detection identifies fault conditions by monitoring channel voltage relative to the supply.

Pin Description: MPQ3324GRE-AEC1 Pin Definition and Functions
Pin Mnemonic Description
1-8 LED1-LED8 8 LED channel outputs
9 GND Ground
10 SCL I2C clock input
11 SDA I2C data input/output
12 PWM Global PWM dimming input
13 EN Chip enable
14 FAULT Fault output (open drain)
15-18 AD0-AD3 I2C address select pins
19-24 VIN/VDD Supply and logic pins
Application Scenarios: In which products and applications is MPQ3324GRE-AEC1 used
  • Automotive tail light with 8-channel independent brightness and position/stop control
  • Interior ambient RGBW lighting with 12-bit color mixing via I2C
  • Dashboard backlight with 524K dimming steps for smooth transitions
  • Automotive exterior position and marker light with phase-shift operation
  • Industrial 8-color LED indicator panel with fault diagnostics
Alternative Models: What chips are recommended as replacements for MPQ3324GRE-AEC1
Model Manufacturer Key Difference
MPQ3362GRE-AEC1 MPS 4-channel, 200mA, higher current per channel
MPQ3364GRE-AEC1 MPS 4-channel, 150mA, boost WLED driver
TLC5926 TI 16-channel, 50mA, non-automotive
NCP5623 onsemi 3-channel I2C LED driver
IS31FL3731 Lumissil 8×8 matrix, 16mA/ch, I2C

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1