Opens in a new tab

MPU-6000

6-axis IMU, 3-axis gyro+3-axis accel, ±2000dps/±16g, 16-bit, I2C+SPI, DMP, QFN-24

12500

Effective Inventory

Image for reference only

Manufacturer Part:

MPU-6000

Package:

QFN-24 (4.0 x 4.0 x 0.9 mm, exposed pad)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MPU-6000 is the world’s first integrated 6-axis motion processing unit (MPU) from InvenSense (now TDK InvenSense). Combining a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer on a single die with an onboard Digital Motion Processor (DMP), the MPU-6000 eliminates cross-axis alignment errors common in discrete solutions. With user-programmable full-scale ranges of ±250/±500/±1000/±2000°/s for the gyro and ±2g/±4g/±8g/±16g for the accelerometer, plus I²C and SPI interfaces, the MPU-6000 is ideal for motion tracking in consumer electronics, robotics, and industrial applications.

Key Specifications

Manufacturer TDK InvenSense (formerly InvenSense)
Type 6-Axis Motion Processing Unit (IMU)
Gyroscope Axes 3 (X, Y, Z)
Accelerometer Axes 3 (X, Y, Z)
Gyro Full-Scale Range ±250, ±500, ±1000, ±2000 °/s (dps)
Accel Full-Scale Range ±2g, ±4g, ±8g, ±16g
ADC Resolution 16-bit (gyro and accelerometer)
Gyroscope Noise 0.05 °/s/√Hz (typical, ±250dps)
Accelerometer Noise 400 µg/√Hz (typical)
Temperature Sensor Integrated digital temperature sensor
DMP (Digital Motion Processor) Yes (on-chip 9-axis MotionFusion)
FIFO Buffer 1024 bytes
Interface I²C (up to 400kHz) + SPI (up to 20MHz)
Auxiliary I²C Master I²C for external magnetometer/sensors
Supply Voltage (VDD) 2.375V to 3.46V (2.5V/3.0V/3.3V ±5%)
Gyro Operating Current 5 mA (typical)
Accel Operating Current 500 µA (typical)
All 6-axis + DMP 5.5 mA (typical)
Standby Current 5 µA (typical)
Low Power Accel Mode 10-110 µA (1.25-40Hz)
Operating Temperature -40°C to +85°C
Shock Tolerance 10,000 g
Package QFN-24 (4.0mm × 4.0mm × 0.9mm)

Features

  • World’s first integrated 6-axis motion processor
  • 3-axis MEMS gyroscope with 4 programmable ranges
  • 3-axis MEMS accelerometer with 4 programmable ranges
  • 16-bit ADCs for all 6 axes
  • On-chip Digital Motion Processor (DMP) for sensor fusion
  • 9-axis MotionFusion via auxiliary I²C magnetometer
  • 1024-byte FIFO buffer for burst data reads
  • Digital temperature sensor
  • Programmable digital low-pass filters
  • I²C interface (up to 400kHz)
  • SPI interface (up to 20MHz for sensor reads)
  • Auxiliary master I²C bus for external sensors
  • Programmable interrupts (motion, tap, free-fall, etc.)
  • User self-test for gyro and accelerometer
  • Low power modes for battery operation
  • ±1% on-chip oscillator frequency tolerance
  • 10,000g shock tolerance
  • Compact 4×4mm QFN-24 package
  • Wafer-level hermetic MEMS packaging
  • RoHS compliant

Applications

  • Smartphones and tablet motion sensing
  • Gaming controllers and motion remotes
  • Wearable fitness and activity trackers
  • Drones and UAV flight control
  • Robotics and balancing systems
  • Virtual reality (VR) and augmented reality (AR) headsets
  • Pedestrian dead reckoning and navigation
  • Industrial vibration and shock monitoring
Product Introduction: MPU-6000 Product Introduction

The MPU-6000 is a 6-axis Motion Processing Unit (MPU) manufactured by InvenSense (acquired by TDK, now TDK InvenSense). It was the world’s first integrated 6-axis motion sensor, combining a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer on a single silicon die, along with a Digital Motion Processor (DMP) that offloads complex sensor fusion algorithms from the host processor. The MPU-6000 represents the second generation of InvenSense’s motion processing technology, building on the success of the MPU-30X0 single gyroscope family. The ‘MPU’ stands for Motion Processing Unit, distinguishing it from simple IMU (Inertial Measurement Unit) devices by its integrated motion processing capability. The ‘6000’ series number indicates 6-axis integration. The MPU-6000 is unique in the 60X0 family for supporting both I²C and SPI serial interfaces (the MPU-6050 variant supports only I²C), making it the preferred choice for applications requiring higher data throughput or simpler SPI-based communication. The gyroscope features a vibrating MEMS structure that uses the Coriolis effect to detect angular rate, with user-programmable full-scale ranges of ±250, ±500, ±1000, or ±2000 degrees per second. Each axis has a dedicated 16-bit sigma-delta ADC for high-resolution measurement. The accelerometer uses a capacitive MEMS proof-mass structure with three independent axes, offering full-scale ranges of ±2g, ±4g, ±8g, or ±16g. Like the gyro, each accelerometer axis has its own 16-bit ADC. A standout feature is the Digital Motion Processor (DMP), a dedicated hardware engine that performs 9-axis sensor fusion (when paired with an external magnetometer via the auxiliary I²C bus), gesture recognition, and other motion processing algorithms. This offloads the host processor from intensive computation and reduces system power consumption. A 1024-byte FIFO buffer allows the host processor to read sensor data in bursts and then enter low-power modes while the MPU continues collecting data. The device operates from a single 2.375V to 3.46V supply and comes in a compact 24-pin QFN package measuring just 4×4×0.9mm.

Working Principle: MPU-6000 Working Principle

The MPU-6000 operates as an integrated 6-axis motion processing system combining MEMS sensing with digital signal processing: 1) 3-Axis MEMS Gyroscope: – Operating Principle: Vibrating tuning fork structures driven at resonance detect angular rate using the Coriolis effect. When the device rotates, the vibrating proof masses experience a Coriolis force perpendicular to both the vibration direction and the rotation axis, causing a measurable displacement. – Sensing: Capacitive sensing detects the Coriolis-induced displacement. The signal is amplified, demodulated, and filtered to produce a voltage proportional to angular rate. – ADC: Each axis has a dedicated 16-bit sigma-delta ADC that digitizes the rate signal. Sampling rate is programmable from 3.9Hz to 8kHz. – Full Scale: User-programmable ±250, ±500, ±1000, ±2000 °/s (dps). 2) 3-Axis MEMS Accelerometer: – Operating Principle: Each axis has a suspended proof mass that deflects under acceleration. The deflection changes the capacitance between the proof mass and fixed electrodes, with differential sensing rejecting common-mode interference. – Architecture: The capacitive MEMS structure is designed for low noise and low cross-axis sensitivity. Each axis is independent and factory-calibrated. – ADC: Each channel uses a 16-bit sigma-delta ADC. – Full Scale: User-programmable ±2g, ±4g, ±8g, ±16g. 3) Digital Motion Processor (DMP): – A dedicated hardware accelerator that processes sensor data independently of the host CPU. – Performs 9-axis MotionFusion when combined with an external magnetometer (connected via auxiliary I²C). – Handles gesture recognition, tap detection, orientation detection, pedometer, and other motion-based algorithms. – Outputs processed quaternion or Euler angle data, reducing host processing load. 4) FIFO Buffer: – 1024-byte first-in-first-out buffer stores sensor samples (gyro, accel, temperature, external sensor data). – Allows the host processor to read data in bursts and then sleep, minimizing power consumption. – Programmable watermark interrupt triggers when FIFO reaches a threshold. 5) Temperature Sensor: – On-chip temperature sensor with digital output, used for temperature compensation of gyro and accelerometer biases. 6) Clock System: – Internal 8MHz on-chip oscillator with ±1% accuracy over temperature. – Optional external clock input (32.768kHz or 19.2MHz) for higher accuracy applications. 7) Serial Interfaces: – Primary I²C interface: Up to 400kHz, used for register configuration and data reads. – Primary SPI interface: Up to 20MHz (for sensor data reads), 1MHz for all registers. SPI is a key advantage of MPU-6000 over MPU-6050. – Auxiliary I²C master: Connects to external sensors (e.g., magnetometer like AK8975). Supports pass-through mode for direct host access. 8) Interrupt System: – Programmable interrupt outputs for data ready, FIFO watermark, FIFO overflow, motion detection, zero-motion detection, free-fall detection, and tap detection. 9) Power Management: – Multiple power modes: full operation, gyro-only, accel-only low power, sleep, and standby. – Low-power accelerometer mode with 1.25-40Hz sampling for motion wakeup applications.

Pin Description: MPU-6000 Pin Definition and Functions
Pin Name Type Function
1 CLKIN Input External clock input (optional, leave floating if unused)
2 VDD Power Main power supply (2.375V – 3.46V)
3 REGOUT Output Regulated LDO output (connect capacitor to GND)
4 FSYNC Input Frame synchronization input (for camera/image sync)
5 INT Output Interrupt output (programmable)
6 VDD Power Digital I/O supply (same as VDD for MPU-6000)
7 SCL/SCLK Input I²C serial clock / SPI serial clock
8 SDA/SDI I/O I²C serial data / SPI data in
9 AD0/SDO I/O I²C address LSB / SPI data out
10 nCS Input SPI chip select (tie to VDD for I²C-only mode)
11-14 AUX_DA / AUX_CL etc. I/O Auxiliary I²C for external magnetometer/sensors
15-24 GND / VDD / NC Power / N/C Ground pins, additional power, some no-connect
Bottom EP (Exposed Pad) Ground Exposed thermal pad, must connect to GND

QFN-24 package, 4.0 × 4.0 × 0.9 mm. Pin 1 is marked by a dot on the package top.

Application Scenarios: In which products and applications is MPU-6000 used
  • Smartphone and tablet motion sensing (screen rotation, gesture control)
  • Gaming controllers (Wii-like motion remotes, VR controllers)
  • Wearable fitness trackers and smartwatches
  • Drone and UAV flight stabilization and navigation
  • Self-balancing robots and inverted pendulum systems
  • Virtual reality and augmented reality head tracking
  • Pedestrian dead reckoning (PDR) and indoor navigation
  • Industrial vibration monitoring and predictive maintenance
Alternative Models: What chips are recommended as replacements for MPU-6000
Manufacturer Part Number Description
TDK InvenSense MPU-6050 I²C only, VLOGIC pin, 6-axis
TDK InvenSense MPU-6500 2nd gen 6-axis, lower power, smaller QFN-24
TDK InvenSense MPU-9250 9-axis (6-axis + magnetometer), SPI/I²C
Bosch BNO055 9-axis IMU with sensor fusion
STMicro LSM6DS3 6-axis IMU, iNEMO series

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1