Opens in a new tab

MPX5500DP

5500 kPa diff pressure sensor, 0.8mV/kPa, temp compensated, dual-port, industrial

1501

Effective Inventory

Image for reference only

Manufacturer Part:

MPX5500DP

Package:

Case-isolated package with dual axial ports (35 x 29 x 31mm approx)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MPX5500DP from NXP is a dual-port differential pressure sensor with 0-5500 kPa (0-800 psi) range, integrated signal conditioning, and temperature compensation in a case-isolated package.

Key Specifications

Pressure Type Differential (dual port)
Pressure Range 0 to 5500 kPa (0 to 800 psi)
Sensitivity 0.8 mV/kPa (typ)
Full-Scale Output 4.4 V (typ @ Vs=5V)
Supply Voltage 4.75V to 5.25V
Supply Current 7 mA (typ)
Accuracy +/-0.25% FSS (typ)
Response Time 1.0 ms (typ)
Operating Temperature -40 to +125 C
Port Type Dual axial ports
Package Case-isolated, 6-pin

Features

  • Integrated signal conditioning and temperature compensation
  • Dual-port differential measurement
  • Case-isolated from pressure media
  • High 0-800 psi range for hydraulic systems
  • Durable stainless steel port construction

Applications

  • Hydraulic pressure monitoring
  • Industrial process control
  • Engine and transmission testing
  • Compressor and pump monitoring
Product Introduction: MPX5500DP Product Introduction

The MPX5500DP from NXP is a dual-port differential pressure sensor from the MPX5000 series, designed for measuring differential pressure up to 5500 kPa (800 psi) in demanding industrial and automotive applications. The device features on-chip signal conditioning and temperature compensation from -40 to +125C, providing a high-level analog output voltage proportional to the applied differential pressure. The dual-port design has two separate pressure ports (P1 and P2) allowing measurement of the pressure difference between two points in a hydraulic or pneumatic system. The case-isolated package ensures the sensor die is not in direct contact with the pressure media, improving chemical compatibility and reliability with harsh media. The integrated signal conditioning includes a thin-film resistor network that provides offset calibration, full-span calibration, and temperature compensation, eliminating the need for external calibration circuitry. The sensor uses NXP’s proven piezoresistive MEMS technology where a silicon diaphragm with implanted piezoresistive strain gauges deflects under pressure, changing the resistance values in a Wheatstone bridge configuration. The MPX5500DP is suitable for hydraulic pressure monitoring, engine test stands, compressor control, and industrial process applications requiring high-pressure differential measurement with robust environmental protection.

Working Principle: MPX5500DP Working Principle

The MPX5500DP operates as a piezoresistive pressure sensor with integrated signal conditioning. Key subsystems include: (1) Piezoresistive Sensing Element – a silicon diaphragm with four ion-implanted piezoresistive strain gauges arranged in a Wheatstone bridge; when pressure is applied across the diaphragm (P1-P2), the diaphragm deflects, causing two strain gauges to compress and two to stretch, changing their resistance values and unbalancing the bridge; the bridge output voltage is proportional to the applied differential pressure; (2) Temperature Compensation – thin-film resistors on the same chip provide first-order temperature compensation; the resistors are laser-trimmed during manufacturing to minimize offset drift and sensitivity variation over the -40 to +125C range; (3) Signal Conditioning – additional thin-film resistors provide offset calibration and full-span calibration; the calibrated full-scale output is approximately 4.4V at 5V supply and 5500 kPa applied pressure; (4) Dual-Port Design – two separate pressure ports allow differential measurement; the P1 port is the positive (high) pressure side; the P2 port is the negative (reference) side; the sensor output is proportional to P1-P2; (5) Case Isolation – a stainless steel diaphragm and silicone oil transfer the pressure from the port to the sensing element; the sensor die is isolated from the pressure media, providing chemical resistance and preventing media contamination of the sensing element.

Pin Description: MPX5500DP Pin Definition and Functions
Pin Name Function
1 Vout Analog output voltage (proportional to pressure)
2 GND Ground
3 Vs 5V supply
4-6 NC No connect / test pins
Application Scenarios: In which products and applications is MPX5500DP used
  • Hydraulic press monitoring: measure differential pressure across hydraulic cylinder up to 800 psi
  • Engine test stand: monitor differential pressure across engine filter at 5500 kPa
  • Compressor control: differential pressure across compressor stages for performance monitoring
  • Industrial process: measure pressure drop across flow restriction for flow calculation
Alternative Models: What chips are recommended as replacements for MPX5500DP
Manufacturer Part Number Package Notes
NXP MPX5500AP Single-port Absolute pressure version
NXP MPX5700DP Dual-port 7000 kPa higher range
NXP MPX5100DP Dual-port 100 kPa, lower range
Honeywell 24PCDFA6G Dual-port 100 psi differential, similar

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1