Opens in a new tab

MSP430F5304IRGZR

16-bit ultra-low-power MCU, 25MHz, 8KB Flash, 6KB RAM, 10-bit ADC, VQFN-48

8900

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430F5304IRGZR

Package:

VQFN-48 (7.0 x 7.0 x 0.95 mm, 0.5mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MSP430F5304IRGZR is an ultra-low-power 16-bit microcontroller from Texas Instruments’ MSP430 series. Featuring the MSP430 CPUXV2 core running up to 25MHz, this device offers 8KB Flash memory, 6KB RAM, a 10-bit ADC, multiple 16-bit timers, DMA, hardware multiplier, and serial communication interfaces (UART/SPI/I²C). Packaged in a 48-pin VQFN (RGZ), the MSP430F5304 is optimized for battery-powered measurement and sensing applications requiring both low power and high analog integration.

Key Specifications

Manufacturer Texas Instruments
Core MSP430 CPUXV2 (16-bit RISC)
Maximum Frequency 25 MHz
Flash Memory 8 KB
RAM 6 KB
ADC 10-bit SAR, 6 channels
GPIO Pins 31
Timers 4 × 16-bit (TA0, TA1, TA2, TB0)
UART 1 (via USCI_A)
SPI 2 (via USCI)
I²C 1 (via USCI_B)
DMA 3-channel
Hardware Multiplier Yes (16×16, 32-bit support)
RTC Yes (RTC_B with alarm)
Supply Voltage 1.8V to 3.6V
Active Mode Current 195 µA/MHz (typical @ 8MHz, 3V)
Standby Mode (LPM3) 1.9 µA (with RTC, 2.2V)
Shutdown Mode (LPM4.5) 0.18 µA (typical)
Wake-up Time < 5 µs from standby
Operating Temperature -40°C to +85°C
Package VQFN-48 (RGZ), 7mm × 7mm

Features

  • Ultra-low power consumption across all operating modes
  • 16-bit RISC architecture, up to 25MHz system clock
  • Five low-power modes: LPM0 through LPM4.5
  • Wake from standby in less than 5 µs
  • Unified Clock System (UCS) with FLL for frequency stabilization
  • Integrated LDO with programmable core supply
  • Supply voltage supervisor (SVM/SVS) with brownout detection
  • 10-bit SAR ADC with 6 input channels
  • 4 × 16-bit timers with capture/compare registers
  • 3-channel DMA controller
  • Hardware multiplier (16×16, 32-bit support)
  • USCI: UART, SPI, I²C multi-function serial interfaces
  • RTC module with alarm capabilities
  • Port mapping controller for flexible I/O assignment
  • JTAG and Spy-Bi-Wire debug interfaces
  • Secure debug support
  • RoHS compliant, lead-free VQFN-48 package

Applications

  • Battery-powered portable instruments
  • Sensor nodes and data acquisition systems
  • Industrial control and monitoring
  • Smart metering (energy, water, gas)
  • Medical and healthcare devices
  • Consumer electronics accessories
  • Building automation and HVAC control
  • Wireless sensor network end nodes
Product Introduction: MSP430F5304IRGZR Product Introduction

The MSP430F5304IRGZR is a member of Texas Instruments’ MSP430F5xx family of ultra-low-power mixed-signal microcontrollers, renowned for their industry-leading power efficiency and flexible peripheral integration. The part number breaks down as follows: ‘MSP430’ denotes the MSP430 16-bit MCU series, ‘F530’ indicates the F530x subfamily with integrated 3.3V LDO and ADC10, ‘4’ specifies the memory configuration (8KB Flash, 6KB RAM), ‘I’ indicates industrial temperature range (-40°C to +85°C), ‘RGZ’ is the 48-pin VQFN package designator, and ‘R’ denotes tape-and-reel packaging. At the heart of the MSP430F5304 is the CPUXV2 core, a 16-bit RISC processor with 27 instructions and 16 registers, running at speeds up to 25MHz. The architecture is optimized for maximum code efficiency, with constant generators and a von Neumann memory architecture that allows uniform access to all memory, peripherals, and registers. The MCU features 8KB of in-system programmable Flash memory and 6KB of RAM. A built-in 3.3V LDO regulator simplifies power supply design, generating the internal core voltage from a single 1.8V-3.6V supply. A standout feature is the 10-bit SAR ADC with up to 6 input channels, capable of sampling at rates up to 200ksps. The ADC supports multiple reference sources and includes an internal temperature sensor. System peripherals include four 16-bit timers (Timer_A and Timer_B), a 3-channel DMA controller, and a hardware multiplier supporting 16×16 and 32-bit operations. Serial communication is handled by the Universal Serial Communication Interface (USCI), which can be configured for UART, SPI, or I²C operation. The MSP430F5304 includes one USCI module in the 48-pin package. The integrated RTC module provides real-time clock functionality with alarm features, independent of the main CPU. True to the MSP430 legacy, the F5304 offers five low-power modes (LPM0 through LPM4.5) with standby currents as low as 1.9µA in LPM3 (RTC active) and just 0.18µA in LPM4.5 shutdown mode. The digitally controlled oscillator (DCO) allows wake-up from any low-power mode to active mode in less than 5µs, enabling duty-cycled applications to maximize battery life.

Working Principle: MSP430F5304IRGZR Working Principle

The MSP430F5304IRGZR operates as a complete mixed-signal microcontroller system with the following architecture: 1) CPU Core (MSP430 CPUXV2): A 16-bit RISC processor with 27 core instructions, 16 registers, and constant generators. The core uses a von Neumann architecture where all memory and peripherals share a common address space. It supports 16-bit and 20-bit addressing modes for extended memory access. 2) Unified Clock System (UCS): Generates all system clocks from multiple sources: – LFXT1: Low-frequency 32kHz crystal (for ACLK, RTC) – XT2: High-frequency crystal up to 32MHz (for MCLK/SMCLK) – DCO: Digitally controlled oscillator with FLL for frequency stabilization – VLO: Very low power internal oscillator (~10kHz) – REFO: Trimmed internal reference (~32.768kHz) Three main clocks are distributed: MCLK (CPU clock, up to 25MHz), SMCLK (peripheral clock), and ACLK (auxiliary/real-time clock, ~32kHz). 3) Power Management Module (PMM): Includes an integrated LDO that generates the core supply voltage from the I/O supply. Features supply voltage supervisor (SVM) and supply voltage supervisor (SVS) for brownout detection and power-fail reset. Supports programmable core voltage levels for power optimization. 4) Memory System: – 8KB Flash: In-system programmable, used for code and data storage – 6KB RAM: Static RAM for data and stack – Information memory: Smaller Flash segments for non-volatile data storage 5) 10-bit SAR ADC: A successive approximation analog-to-digital converter with up to 6 input channels. Features include selectable reference voltages, auto-sequencing, and conversion results transferable via DMA. Includes an internal temperature sensor. 6) Timer Peripherals: – Timer_A0: 16-bit timer with 5 capture/compare registers (PWM capable) – Timer_A1: 16-bit timer with 3 capture/compare registers – Timer_A2: 16-bit timer with 3 capture/compare registers – Timer_B0: 16-bit timer with 7 capture/compare shadow registers 7) Universal Serial Communication Interface (USCI): One USCI module supporting multiple protocols: – UART mode with auto baud rate detection – SPI mode (master/slave) – I²C mode (multi-master capable) 8) DMA Controller: 3-channel DMA that can transfer data between peripherals and memory without CPU intervention, reducing power consumption by allowing the CPU to remain in low-power modes. 9) Hardware Multiplier: A 16×16-bit multiplier peripheral supporting unsigned, signed, and multiply-accumulate operations. Can also perform 32-bit operations, useful for DSP-like math. 10) RTC_B: Real-time clock module with calendar mode (seconds through years), alarm functionality, and calendar comparison registers. 11) I/O Ports: Up to 31 GPIO pins with interrupt capability on Port 1 and Port 2. A port mapping controller allows flexible assignment of peripheral functions to I/O pins. 12) Debug Interface: JTAG and Spy-Bi-Wire (2-wire JTAG) interfaces for programming and on-chip debugging.

Pin Description: MSP430F5304IRGZR Pin Definition and Functions
Pin Group Pin Names Function
Power DVCC, DVSS, AVCC, AVSS Digital and analog power/ground
Reset RST/NMI Reset / Non-maskable interrupt
JTAG/SBW TCK, TMS, TDI, TDO, TEST JTAG and Spy-Bi-Wire debug pins
Oscillators XIN, XOUT, XT2IN, XT2OUT 32kHz XT1 and high-frequency XT2 crystal pins
Port 1 P1.0 – P1.7 8 GPIO with interrupt capability (peripheral: TA0, USCI)
Port 2 P2.0 – P2.7 8 GPIO with interrupt capability (peripheral: TA1, TB0, USCI)
Port 3 P3.0 – P3.7 8 GPIO (peripheral: TB0, USCI, DMA)
Port 4 P4.0 – P4.7 8 GPIO with port mapping controller
Port 6 (ADC) P6.0 – P6.7 Analog inputs A0-A7, comparator B inputs
Analog VeREF+, VeREF- External reference voltage for ADC
Ground Pad EP (Exposed Pad) Connect to VSS for thermal dissipation

VQFN-48 (RGZ) package, 7.0 × 7.0 × 0.95 mm. Exposed thermal pad must be soldered to ground.

Application Scenarios: In which products and applications is MSP430F5304IRGZR used
  • Portable and battery-powered measurement instruments
  • Smart energy, water, and gas metering
  • Wireless sensor network end nodes
  • Industrial sensor interfaces and data loggers
  • Medical wearables and diagnostic devices
  • Building automation sensors and controllers
  • Consumer electronics with long battery life requirements
  • HVAC monitoring and control systems
Alternative Models: What chips are recommended as replacements for MSP430F5304IRGZR
Manufacturer Part Number Description
TI MSP430F5308IRGZR 16KB Flash, 4KB RAM version
TI MSP430F5309IRGZR 24KB Flash, 4KB RAM version
TI MSP430F5310IRGZR 32KB Flash, 6KB RAM, 2 USCIs
TI MSP430F5304IPTR Same die, LQFP-48 package
TI MSP430FR2355 FRAM-based alternative, similar features

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1