Opens in a new tab

Home » Flash Memory (NAND / NOR Flash), Memory Chips » MT25QL256ABA1EW9-0SIT

MT25QL256ABA1EW9-0SIT

256Mbit Serial NOR Flash, SPI Quad I/O, 133MHz, 2.7-3.6V, 64KB sectors, 8-WPDFN, industrial temp

8800

Effective Inventory

Image for reference only

Manufacturer Part:

MT25QL256ABA1EW9-0SIT

Package:

8-WPDFN / MLP8 (8.0 x 6.0 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MT25QL256ABA1EW9-0SIT is a 256-Mbit (32MB) serial NOR Flash memory device from Micron Technology. Part of the MT25Q family, it features a high-speed SPI-compatible bus interface supporting single, dual, and quad I/O modes, with clock frequencies up to 133MHz. The device offers execute-in-place (XIP) functionality, advanced write protection mechanisms, and 64KB uniform sector erase with 4KB and 32KB subsector options. Packaged in 8-pin WPDFN (8×6mm), it operates from -40°C to +85°C.

Key Specifications

Manufacturer Micron Technology
Memory Type Serial NOR Flash
Capacity 256 Mbit (32 MB)
Organization 32M x 8 (64M x 4 for quad I/O)
Interface SPI – Quad I/O (Extended, Dual, Quad)
Clock Frequency Up to 133 MHz (STR), 90 MHz (DTR)
Max Throughput Up to 90 MB/s (quad I/O)
Supply Voltage 2.7V to 3.6V
Sector Size 64 KB (uniform), 4KB and 32KB subsectors
Page Size 256 bytes
Erase Cycles Min. 100,000 per sector
Data Retention 20 years (typical)
Operating Temperature -40°C to +85°C (Industrial)
Package 8-WPDFN (8x6mm, MLP8)
Security OTP area, password protection, write protection

Features

  • High-performance SPI-compatible serial interface
  • Single/dual/quad I/O support (Extended, Dual, Quad protocols)
  • Single Transfer Rate (STR) up to 133MHz, Double Transfer Rate (DTR) up to 90MHz
  • Execute-in-place (XIP) functionality
  • 256-byte page program buffer
  • 64KB uniform sector erase with 4KB/32KB subsector erase
  • Program/Erase suspend operations
  • Volatile and non-volatile configuration settings
  • Software reset and hardware reset pin
  • 3-byte and 4-byte address modes (beyond 128Mb)
  • 64-byte OTP (One-Time Programmable) area
  • Advanced security: sector lock, password protection, hardware write protection
  • CRC error detection
  • JEDEC-standard 3-byte signature (BA19h)
  • JESD47H compliant
  • 8-pin WPDFN (8x6mm) package

Applications

  • Boot code storage for embedded systems
  • Firmware and application code storage (XIP)
  • Industrial control and automation systems
  • Networking and communication equipment
  • Consumer electronics and set-top boxes
  • Automotive infotainment (industrial temp grade)
  • IoT and smart home devices
  • FPGA configuration memory
Product Introduction: MT25QL256ABA1EW9-0SIT Product Introduction

The MT25QL256ABA1EW9-0SIT is a high-performance 256-Mbit (32-MB) serial NOR Flash memory device from Micron Technology, part of the second-generation MT25Q family. It combines high-speed serial interface performance with advanced feature set in a compact WPDFN-8 package. The device supports standard SPI as well as dual and quad I/O protocols, enabling data transfer rates up to 90 MB/s at 133 MHz clock frequency in quad I/O mode. Both Single Transfer Rate (STR) and Double Transfer Rate (DTR) modes are supported. The memory array is organized into uniform 64KB sectors, with 4KB and 32KB subsector granularity available for flexible erase operations. Each sector supports a minimum of 100,000 erase cycles with 20 years typical data retention. Execute-in-place (XIP) functionality allows code to be executed directly from Flash without needing to copy to RAM first, reducing system memory requirements and boot time. The device includes advanced security features including 64 bytes of OTP (One-Time Programmable) memory, volatile and non-volatile sector locking, password protection, and hardware write protection. A CRC detection mechanism helps identify accidental data corruption. The ‘A’ in the part number indicates monolithic device stacking, ‘BA’ indicates second generation with die revision A, ‘E’ signifies 64KB sector size with RESET#/HOLD# pin configuration, ‘W9’ specifies the 8x6mm W-PDFN package, ‘0’ indicates standard security, and ‘SIT’ denotes the industrial temperature range (-40°C to +85°C).

Working Principle: MT25QL256ABA1EW9-0SIT Working Principle

The MT25QL256ABA1EW9-0SIT operates as a serial NOR Flash memory device using an SPI-compatible interface. The memory cell structure is based on floating-gate NOR Flash technology, where each memory cell stores a charge on a floating gate to represent data. NOR Flash provides random access reads with short initial access latency, making it ideal for code storage and execute-in-place applications. Operation follows a command-based protocol: the host controller sends an instruction byte over the SPI interface followed by address bytes (where required) and data bytes (for write operations). Common commands include READ (03h), Fast READ (0Bh), Quad Input Fast Program (32h), Sector Erase (D8h), and Write Enable (06h). The device supports three address modes: 1) Standard 3-byte addressing for up to 128Mb devices; 2) 4-byte addressing for densities beyond 128Mb (enabled via command or non-volatile register); 3) Extended address mode using an address extension register. Programming is performed on 256-byte pages, with each byte in a page able to be programmed from 1 to 0 (but not the reverse). Erasing resets all bytes in a sector/subsector to 1 (0xFF). The device supports Program Suspend and Erase Suspend operations, allowing a read operation to interrupt an ongoing program or erase operation temporarily. Write protection is implemented through multiple layers: status register block protect bits define which sectors are protected, the write protect pin (W#) can be used to prevent status register writes, and password protection adds an additional security layer. The 64-byte OTP area provides permanent, user-lockable non-volatile storage for unique identifiers or security keys.

Pin Description: MT25QL256ABA1EW9-0SIT Pin Definition and Functions
Pin Name Type Function
1 S# (CS#) Input Chip select / SPI chip select (active low)
2 DQ1 (SO) I/O Data I/O 1 / Serial output (in single mode)
3 W#/VPP Input Write protect / VPP for accelerated programming
4 VSS Ground Ground
5 DQ0 (SI) I/O Data I/O 0 / Serial input (in single mode)
6 C (CLK) Input SPI clock input
7 HOLD#/RESET# Input Hold operation / Reset (configurable)
8 VCC Power Supply voltage (2.7-3.6V)
Pad EP Ground Exposed pad (connect to VSS)
Application Scenarios: In which products and applications is MT25QL256ABA1EW9-0SIT used
  • Boot code and firmware storage for embedded microprocessor systems
  • Execute-in-place (XIP) code storage for low-cost systems
  • FPGA configuration data storage
  • Industrial control and automation equipment firmware
  • Networking and telecommunications infrastructure
  • Consumer electronics: set-top boxes, smart TVs, wearables
  • IoT edge devices and smart home controllers
  • Automotive infotainment and telematics systems
Alternative Models: What chips are recommended as replacements for MT25QL256ABA1EW9-0SIT
Manufacturer Part Number Package Notes
Micron MT25QL128ABA1EW9-0SIT WPDFN-8 128Mbit (half density)
Micron MT25QL512ABA1EW9-0SIT WPDFN-8 512Mbit (double density)
Winbond W25Q256JVEIQ WSON-8 256Mbit SPI NOR alternative
Cypress/Infineon S25FL256L SOIC-8/WSON 256Mbit FL-S series
GigaDevice GD25Q256E USON-8 Cost-effective 256Mbit alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1