Opens in a new tab

NB6381DL-LF-Z

8A, 28V synchronous step-down buck converter in QFN-20 (3x4mm), 200kHz-1MHz, COT control

7320

Effective Inventory

Image for reference only

Manufacturer Part:

NB6381DL-LF-Z

Package:

QFN-20 (3x4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NB6381DL-LF-Z from Monolithic Power Systems (MPS) is a fully integrated, high-frequency synchronous rectified step-down (buck) switching mode converter. It delivers up to 8A of continuous output current across a wide 4.5V to 28V input range, housed in a compact QFN-20 (3x4mm) package. The device utilizes Constant-On-Time (COT) control for fast transient response and simplified loop stabilization.

Key Specifications

Input Voltage Range 4.5V to 28V
Output Voltage Range 0.8V to 13V (adjustable)
Output Current 8A continuous
Switching Frequency 200kHz to 1MHz
High-Side MOSFET Rds(on) 30mΩ
Low-Side MOSFET Rds(on) 12mΩ
Reference Voltage 815mV (1% accuracy)
Package QFN-20 (3x4mm)
Operating Temperature -40°C to +125°C

Features

  • Internal 30mΩ high-side and 12mΩ low-side power MOSFETs
  • Proprietary switching loss reduction technique
  • Programmable soft start and soft shutdown
  • Full protection: SCP, OCP, OVP, UVP, and thermal shutdown
  • Constant-On-Time (COT) control mode for fast transient response
  • Power Good output signal

Applications

  • Notebook systems and I/O power
  • Networking systems
  • Optical communication systems
  • Distributed power and POL (Point-of-Load) systems
Product Introduction: NB6381DL-LF-Z Product Introduction

The NB6381DL-LF-Z is a high-efficiency, fast-transient synchronous step-down converter from Monolithic Power Systems. Designed for space-constrained power applications, it integrates both high-side (30mΩ) and low-side (12mΩ) MOSFETs in a tiny QFN-20 (3x4mm) package, eliminating external MOSFET requirements. The converter supports a wide input range of 4.5V to 28V and delivers up to 8A of continuous current, making it ideal for notebook, networking, and POL power systems. The COT control architecture provides excellent transient response while easing loop compensation design.

Working Principle: NB6381DL-LF-Z Working Principle

1. Power Stage: Integrated high-side and low-side MOSFETs perform synchronous buck conversion, reducing conduction losses compared to diode rectification.
2. COT Control: Constant-On-Time control adjusts the off-time based on output voltage feedback, providing fast transient response without complex loop compensation.
3. Protection Subsystem: Over-current protection (OCP) monitors inductor current cycle-by-cycle; over-voltage (OVP) and under-voltage (UVP) comparators monitor the output; thermal shutdown activates at 150°C with 25°C hysteresis.
4. Soft Start/Shutdown: Programmable soft start limits inrush current; soft shutdown discharges the output capacitor gracefully.

Pin Description: NB6381DL-LF-Z Pin Definition and Functions
Pin Name Function
1 AGND Analog ground
2 VCC Internal 5V LDO output (bypass with 1uF cap)
3-5 IN Input voltage supply (4.5V-28V)
6 EN Enable input (active high)
7 BS High-side gate boost capacitor connection
8,9,10 SW Switching node (inductor connection)
11 FB Feedback input (reference 815mV)
12 SS Soft start capacitor input
13 PGOOD Power good open-drain output
14 R7/Ton On-time programming resistor input
15-20 PGND Power ground
Application Scenarios: In which products and applications is NB6381DL-LF-Z used
  • Notebook and laptop system power rails (1.05V, 1.2V, 1.5V, 1.8V, 3.3V, 5V)
  • Networking and telecom equipment POL converters
  • Optical communication module power supplies
  • Distributed power architectures in server and storage systems
  • Set-top box and digital TV power management
Alternative Models: What chips are recommended as replacements for NB6381DL-LF-Z
Manufacturer Part Number Package Notes
MPS NB639DL-LF-Z QFN-20 (3x4mm) 8A, 28V, higher switching freq option
MPS NB638DL-LF-Z QFN-20 (3x4mm) 7A version, same footprint
MPS MP8736 QFN-20 (3x4mm) 6A, 19V input, pin compatible
Texas Instruments TPS54320 QFN-16 3A, similar feature set
Analog Devices ADP2386 QFN-20 6A, 20V input synchronous buck

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1