Opens in a new tab

Home » Integrated Circuits ICs » NCP5501DT33RKG

NCP5501DT33RKG

3.3V 1A LDO, 40µA IQ, DPAK-4

2702

Effective Inventory

Image for reference only

Manufacturer Part:

NCP5501DT33RKG

Package:

DPAK-4

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCP5501DT33RKG from onsemi is a 3.3V fixed 1A LDO regulator with ultra-low 40 µA quiescent current. The wide 18V input range and DPAK-4 package suit automotive and industrial always-on power rails where efficiency at light load is critical.

Key Specifications

Function 3.3V, 1A very low Iq LDO
Output Voltage 3.3V fixed
Output Current 1A
Dropout Voltage 600 mV at 1A
Quiescent Current 40 µA
Supply Voltage Up to 18V
Package DPAK-4 (6.1×5.1mm)

Working Principle

PMOS pass element achieves low dropout. Error amplifier and trimmed bandgap reference maintain 3.3V output with ±2% accuracy. 40 µA quiescent current is independent of load, ideal for always-on battery systems. Current limit and thermal shutdown provide fault protection. EN pin enables/disables the output.

Applications

  • Automotive always-on 3.3V rail
  • Industrial standby power
  • Battery-backed system
  • ECU keep-alive supply
Product Introduction: NCP5501DT33RKG Product Introduction

The NCP5501DT33RKG from onsemi is a 3.3V fixed 1A LDO regulator with ultra-low 40 µA quiescent current. The wide 18V input range and DPAK-4 package suit automotive and industrial always-on power rails where efficiency at light load is critical.

Working Principle: NCP5501DT33RKG Working Principle

PMOS pass element achieves low dropout. Error amplifier and trimmed bandgap reference maintain 3.3V output with ±2% accuracy. 40 µA quiescent current is independent of load, ideal for always-on battery systems. Current limit and thermal shutdown provide fault protection. EN pin enables/disables the output.

Pin Description: NCP5501DT33RKG Pin Definition and Functions
Pin Name Description
1 VIN Input
2 GND Ground (tab)
3 VOUT 3.3V output
4 EN Enable
Application Scenarios: In which products and applications is NCP5501DT33RKG used
  • Automotive always-on 3.3V rail
  • Industrial standby power
  • Battery-backed system
  • ECU keep-alive supply
Alternative Models: What chips are recommended as replacements for NCP5501DT33RKG
Model Manufacturer Key Difference
TLV1117-33 TI Higher IQ

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1