Opens in a new tab

Home » Integrated Circuits ICs » NCS3402DR2G

NCS3402DR2G

Auto dual comparator, 600nA, 1.5-5.5V, SOIC-8, -40 to 125C

7233

Effective Inventory

Image for reference only

Manufacturer Part:

NCS3402DR2G

Package:

SOIC-8 (3.9×4.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NCS3402DR2G is an AEC-Q100 automotive dual micropower comparator. 1.5V-5.5V, 600nA IQ, push-pull output, SOIC-8 for battery monitoring.

Key Specifications

Type Dual Micropower Comparator (Automotive)
AEC-Q100 Grade 1
Supply Voltage 1.5V to 5.5V
Quiescent Current 600 nA per comparator
Input Offset Voltage +-7 mV max
Response Time 6 us typ (large signal)
Output Type Push-Pull
Operating Temp -40 to +125C
Package SOIC-8 (3.9×4.9mm)

Features

  • AEC-Q100 Grade 1 automotive
  • 600nA ultra-low quiescent current
  • 1.5V-5.5V wide supply range
  • Push-pull output
  • Dual comparator in SOIC-8
  • -40 to 125C automotive range
  • RoHS compliant

Applications

  • Automotive battery monitoring
  • EV cell voltage comparison
  • Low-power threshold detection
  • Automotive safety comparator
Product Introduction: NCS3402DR2G Product Introduction

The NCS3402DR2G from onsemi is an AEC-Q100 Grade 1 automotive dual micropower comparator in SOIC-8 package. 600nA quiescent current per comparator for always-on battery monitoring in EV and automotive applications. 1.5V-5.5V supply range for direct battery rail operation. Push-pull output eliminates external pull-up resistor. -40 to 125C Grade 1 automotive temperature range.

Working Principle: NCS3402DR2G Working Principle

Each comparator has differential input and push-pull output. The 600nA IQ is achieved by sub-threshold CMOS design optimized for micropower. The 6us response time is slower than bipolar comparators but acceptable for battery monitoring and slow sensor comparison. Push-pull output actively drives high and low for clean logic transitions without external components. Input common-mode range extends 200mV beyond both supply rails for rail-to-rail comparison.

Pin Description: NCS3402DR2G Pin Definition and Functions
Pin Name Description
1 1OUT Output 1
2 1IN- Inverting input 1
3 1IN+ Non-inverting input 1
4 VSS Ground
5 2IN+ Non-inverting input 2
6 2IN- Inverting input 2
7 2OUT Output 2
8 VDD Supply
Application Scenarios: In which products and applications is NCS3402DR2G used
  • Auto battery monitor
  • EV cell voltage
  • Safety comparator
Alternative Models: What chips are recommended as replacements for NCS3402DR2G
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1