Opens in a new tab

NCV8170BXV330T2G

3.3V 300mA LDO, AEC-Q100, 3.5uA Iq, XDFN4 1x1mm, -40 to 125C

4022

Effective Inventory

Image for reference only

Manufacturer Part:

NCV8170BXV330T2G

Package:

XDFN-4 (1.0×1.0x0.55mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NCV8170BXV330T2G is an AEC-Q100 automotive LDO regulator. 3.3V fixed output, 300mA, ultra-low noise, 5.5V max input in XDFN-4 (1.0×1.0mm) package.

Key Specifications

Output Voltage 3.3V (fixed)
Max Output Current 300mA
Input Voltage 1.8V to 5.5V
Dropout Voltage 180 mV typ @ 300mA
Quiescent Current 3.5 uA typ
PSRR 68 dB @ 1kHz
Qualification AEC-Q100 Grade 1
Operating Temp -40 to +125C
Package XDFN-4 (1.0×1.0x0.55mm)

Features

  • AEC-Q100 Grade 1 automotive
  • Ultra-compact 1.0×1.0mm XDFN-4
  • 3.3V fixed output, +/-1.5% accuracy
  • 3.5uA ultra-low quiescent current
  • 68 dB high PSRR at 1kHz
  • Auto-discharge on disable

Applications

  • Automotive ADAS sensor supply
  • Camera module 3.3V rail
  • RF transceiver clean power
  • IoT MCU low-power domain
Product Introduction: NCV8170BXV330T2G Product Introduction

The NCV8170BXV330T2G from onsemi is an AEC-Q100 Grade 1 automotive LDO with 3.3V fixed output in an ultra-compact 1.0×1.0mm XDFN-4 package. 300mA output with 180mV dropout at full load. Ultra-low 3.5uA quiescent current and 68 dB PSRR at 1kHz provide clean power for noise-sensitive ADAS sensors and RF modules. Auto-discharge feature ensures rapid output discharge when disabled.

Working Principle: NCV8170BXV330T2G Working Principle

CMOS PMOS pass transistor regulated by error amplifier comparing scaled VOUT with bandgap reference. The 3.5uA quiescent current is achieved by optimized internal bias circuit. The 1.0×1.0mm XDFN-4 is among the smallest LDO packages available, enabled by the 4-pin configuration (VIN, VOUT, GND, EN). Auto-discharge uses an internal NMOS to discharge the output capacitor when EN is low.

Pin Description: NCV8170BXV330T2G Pin Definition and Functions
Pin Name Description
1 VOUT 3.3V output
2 GND Ground
3 EN Enable
4 VIN Input (1.8-5.5V)
Application Scenarios: In which products and applications is NCV8170BXV330T2G used
  • ADAS sensor 3.3V supply
  • Camera module power
  • RF transceiver LDO
Alternative Models: What chips are recommended as replacements for NCV8170BXV330T2G
Model Manufacturer Key Difference
NCV8170BXV180T2G onsemi 1.8V output variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1