Opens in a new tab

NE5532P

Dual low-noise audio op-amp, 5nV/sqrt(Hz), 10MHz GBW, 9V/us, 8-PDIP

10134

Effective Inventory

Image for reference only

Manufacturer Part:

NE5532P

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NE5532P from Texas Instruments is a dual low-noise operational amplifier designed for high-quality audio applications. With 5nV/sqrt(Hz) input noise, 10MHz GBW, and 9V/us slew rate, it is the de facto standard for professional and consumer audio signal paths. Packaged in 8-PDIP.

Key Specifications

Channels 2 (Dual)
Supply Voltage +/-3V to +/-20V
Input Noise Voltage 5nV/sqrt(Hz) at 1kHz (typ)
Gain-Bandwidth Product 10MHz
Slew Rate 9V/us (typ)
CMRR 100dB (typ)
Input Offset Voltage 0.5mV (typ)
Supply Current 4mA per amplifier (typ)
Package 8-PDIP
Operating Temperature 0 to +70 C

Features

  • Ultra-low noise: 5nV/sqrt(Hz) at 1kHz
  • 10MHz gain-bandwidth product
  • High slew rate: 9V/us
  • 100dB CMRR for excellent noise rejection
  • Internal compensation for unity-gain stability
  • Industry standard 8-pin DIP pinout

Applications

  • Professional audio mixing consoles
  • High-fidelity preamplifiers
  • Active crossover networks
  • Line-level signal conditioning
Product Introduction: NE5532P Product Introduction

The NE5532P from Texas Instruments is the industry-standard dual low-noise operational amplifier for audio applications. With input noise voltage density of only 5nV/sqrt(Hz) at 1kHz, 10MHz gain-bandwidth product, and 9V/us slew rate, it provides the performance needed for professional audio signal paths. The 100dB CMRR ensures excellent rejection of power supply noise and common-mode interference. Internal compensation provides unity-gain stability without external components. The NE5532 has been the go-to op-amp for audio design for decades, found in mixing consoles, preamplifiers, equalizers, and active crossover networks worldwide. The 8-PDIP package follows the industry-standard dual op-amp pinout.

Working Principle: NE5532P Working Principle

The NE5532 uses a bipolar input stage optimized for low noise. The differential input pair uses large-geometry transistors with high collector current to minimize base resistance noise, which dominates at low frequencies. The input stage feeds a folded-cascode voltage gain stage with active load, followed by a class AB output stage. Internal compensation provides a dominant pole at approximately 10Hz in unity-gain configuration, giving a 10MHz gain-bandwidth product with 60-degree phase margin. The class AB output stage can drive 600 Ohm loads to +/-10V into 600 Ohm, making it suitable for driving long cable runs. The 9V/us slew rate is set by the input stage tail current and compensation capacitor value.

Pin Description: NE5532P Pin Definition and Functions
Pin Name Function
1 1OUT Channel 1 output
2 1IN- Channel 1 inverting input
3 1IN+ Channel 1 non-inverting input
4 VCC- Negative supply voltage
5 2IN+ Channel 2 non-inverting input
6 2IN- Channel 2 inverting input
7 2OUT Channel 2 output
8 VCC+ Positive supply voltage
Application Scenarios: In which products and applications is NE5532P used
  • Professional audio mixing console channels with 5nV/sqrt(Hz) noise floor
  • Hi-Fi phono and microphone preamplifiers requiring ultra-low noise
  • Active crossover networks for bi-amped and tri-amped speaker systems
  • Line-level signal conditioning with 10MHz bandwidth and 9V/us slew rate
Alternative Models: What chips are recommended as replacements for NE5532P
Model Manufacturer Key Difference
NE5532A TI Lower noise, tighter specs
OPA2134PA TI FET-input, lower bias current, premium audio
LM4562NA TI 2.7nV/sqrt(Hz), ultra-low noise audio
TL072CP TI JFET-input, lower cost, higher noise

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1