Opens in a new tab

NE555P

Precision timer IC, astable/monostable, 4.5-16V, 200mA output, PDIP-8

21000

Effective Inventory

Image for reference only

Manufacturer Part:

NE555P

Package:

PDIP-8 (9.81 x 6.35 x 4.57mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NE555P is a precision timer from Texas Instruments capable of producing accurate time delays or oscillation from microseconds to hours in a 8-pin PDIP through-hole package.

Key Specifications

Supply Voltage 4.5V to 16V
Output Current 200mA max (sink or source)
Timing Range Microseconds to hours
Frequency (astable) Up to 500kHz typical
Initial Timing Accuracy 1% typical
Temperature Drift 50ppm/°C typical
Supply Current 6mA typical at 15V
Trigger Voltage 1/3 VCC
Threshold Voltage 2/3 VCC
Reset Voltage 0.7V typical (active low)
Operating Temperature 0°C to +70°C
Package PDIP-8 (9.81 x 6.35mm)

Features

  • Operates in both astable and monostable modes
  • Adjustable duty cycle in astable mode
  • Output can source or sink up to 200mA
  • Timing from microseconds to hours
  • 1% initial timing accuracy
  • Temperature-stable: 50ppm/°C
  • Reset pin overrides all other inputs
  • Compatible with CMOS logic at 5V supply

Applications

  • Precision timing and time delay generation
  • Pulse generation and waveform shaping
  • LED flashers and tone generators
  • PWM motor speed control
  • Power-up delay and watchdog timers
Product Introduction: NE555P Product Introduction

The NE555P is the industry-standard precision timer from Texas Instruments that has been in production for over 50 years. It can be configured as either a monostable (one-shot) multivibrator producing time delays, or as an astable (free-running) multivibrator generating square wave oscillation. The timing is controlled by external resistors and capacitors, providing flexibility from microseconds to hours. The output can source or sink up to 200mA, directly driving relays, LEDs, and small speakers. The 1% initial timing accuracy and 50ppm/°C temperature drift ensure reliable operation across varying conditions. The 8-pin PDIP package is universally recognized and ideal for prototyping.

Working Principle: NE555P Working Principle

The NE555P contains two comparators, a flip-flop, a discharge transistor, and a resistive voltage divider consisting of three 5kΩ resistors (giving the device its name). The voltage divider sets the upper comparator threshold at 2/3 VCC and the lower comparator threshold at 1/3 VCC. In monostable mode, a negative-going trigger pulse on pin 2 (below 1/3 VCC) sets the flip-flop, driving the output high and turning off the discharge transistor. The external timing capacitor charges through the timing resistor toward VCC. When the capacitor voltage reaches 2/3 VCC, the upper comparator resets the flip-flop, driving the output low and turning on the discharge transistor to rapidly discharge the capacitor. The output pulse width is T = 1.1 × R × C. In astable mode, the capacitor charges through R1+R2 and discharges through R2 only. The charge time (output high) is 0.693 × (R1+R2) × C, and the discharge time (output low) is 0.693 × R2 × C, giving a free-running oscillation frequency of 1.44 / ((R1+2×R2) × C). The duty cycle is always greater than 50% in the basic configuration because R1+R2 > R2. The reset pin (pin 4) overrides all other inputs, forcing the output low and discharging the timing capacitor.

Pin Description: NE555P Pin Definition and Functions
Pin Name Type Description
1 GND Power Ground
2 TRIG Input Trigger (active below 1/3 VCC, starts timing)
3 OUT Output Output (source/sink up to 200mA)
4 RESET Input Reset (active low, overrides all inputs)
5 CTRL Analog Control voltage (2/3 VCC, bypass with 0.01µF)
6 THRESH Input Threshold (ends timing at 2/3 VCC)
7 DISCH Output Discharge (open collector, discharges timing capacitor)
8 VCC Power Supply voltage (4.5V-16V)
Application Scenarios: In which products and applications is NE555P used
  • Time Delays: Monostable mode produces precise delays from 10µs to hours for power-up sequencing and debounce
  • LED Flashers: Astable mode with R and C values sets flash rate; 200mA output directly drives multiple LEDs
  • PWM Motor Control: Astable oscillator with control voltage modulation on pin 5 varies duty cycle for motor speed control
  • Tone Generation: Audio-frequency oscillation with speaker coupling produces alarm tones and beeps
  • Watchdog Timers: Monostable retriggered by MCU; timeout triggers system reset for safety-critical applications
Alternative Models: What chips are recommended as replacements for NE555P
Model Manufacturer Key Difference Package Specs
LM555CN TI Direct equivalent with identical timing characteristics and wider -40 to +85C temperature range DIP-8 4.5-16V/200mA
TLC555CP TI CMOS version with 2-15V supply, 1µA typical supply current for battery-powered timers DIP-8 2-15V/100mA CMOS
SA555P TI Automotive-grade -40 to +125C version for under-hood timer and control applications DIP-8 4.5-16V/-40-125C
NA555P TI Wide-temperature -40 to +125C version with military-grade screening for reliability DIP-8 4.5-16V/-40-125C
NE556N TI Dual timer version with two independent 555 timers in a single DIP-14 package DIP-14 4.5-16V/dual
LMC555CN TI CMOS low-power version with 1.5V minimum supply and 2MHz astable frequency capability DIP-8 1.5-15V/100mA

NE555 is the industry-standard precision timer generating accurate time delays from microseconds to hours. It operates in both astable (oscillator) and monostable (one-shot) modes. CMOS versions (TLC555, LMC555) offer 2-15V supply and 1µA standby for battery applications. The NE556 provides dual timers in DIP-14. SA555 extends temperature range to 125C for automotive use.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1