Opens in a new tab

NRS6028T4R7MMGK

4.7uH 3A semi-shielded power inductor, 40.3mOhm, 6x6mm

4552

Effective Inventory

Image for reference only

Manufacturer Part:

NRS6028T4R7MMGK

Package:

6.0 x 6.0 x 2.8 mm, SMD semi-shielded

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NRS6028T4R7MMGK from Taiyo Yuden is a 4.7uH semi-shielded wirewound power inductor in a 6x6x2.8mm SMD package. With 3A rated current (temperature rise), 2.7A saturation current, and 40.3mOhm max DCR, it is designed for DC-DC converter output filtering in space-constrained applications.

Key Specifications

Inductance 4.7 uH +/-20%
DC Resistance (max) 40.3 mOhm
DC Resistance (typ) 31 mOhm
Rated Current (temp rise) 3.0 A (deltaT=40C)
Saturation Current (Isat) 2.7 A (deltaL=30% max); 3.3A (typ)
Self-Resonant Frequency 39 MHz min
Test Frequency 100 kHz
Shielding Semi-shielded
Core Material Ferrite
Construction Wirewound, drum core
Operating Temperature -40 to +125 C (including self-heating)
Dimensions 6.0 x 6.0 x 2.8 mm max
Terminal Pitch 4.0 mm
RoHS Yes, Halogen-free
Package Embossed tape, 2000 pcs/reel
Status NRND

Features

  • Semi-shielded construction for EMI suppression
  • High current rating: 3A temperature rise, 2.7A saturation
  • Low DCR: 31mOhm typical
  • Compact 6x6x2.8mm footprint
  • Halogen-free, RoHS compliant
  • Compatible with high-frequency DC-DC converters

Applications

  • DC-DC converter output inductors
  • Power supply filtering for FPGAs and CPUs
  • Mobile device power management
  • Industrial power supply modules
Product Introduction: NRS6028T4R7MMGK Product Introduction

The NRS6028T4R7MMGK from Taiyo Yuden is a 4.7uH semi-shielded wirewound power inductor in a 6.0 x 6.0 x 2.8mm surface-mount package. The NRS prefix denotes the NR series S-type (semi-shielded) power inductor family, 6028 indicates the 6.0 x 2.8mm form factor, T denotes tape packaging, 4R7 indicates 4.7uH inductance, MM denotes +/-20% tolerance, G indicates halogen-free, and K denotes embossed tape packaging (2000 pcs/reel). The semi-shielded construction uses a magnetic resin coating over the ferrite drum core, providing significant EMI reduction compared to unshielded types while maintaining a lower profile than fully shielded variants. The inductor features a low DCR of 31mOhm typical (40.3mOhm max) for minimal power loss, a rated current of 3A based on a 40C temperature rise, and a saturation current of 2.7A at -30% inductance drop. The ferrite core material provides stable inductance characteristics up to the 39MHz self-resonant frequency.

Working Principle: NRS6028T4R7MMGK Working Principle

The NRS6028T4R7MMGK operates as an energy storage element in switching power supplies: (1) Energy Storage: During the ON phase of a buck converter, current flows through the inductor and energy is stored in the magnetic field of the ferrite core (E = 0.5 * L * I^2). The inductance of 4.7uH determines the rate of current change (V = L * dI/dt). (2) Current Smoothing: During the OFF phase, the stored magnetic energy maintains current flow to the load through the freewheeling diode or synchronous MOSFET, smoothing the pulsating switch current into a continuous DC output. (3) Saturation Behavior: As DC current increases beyond 2.7A (Isat), the ferrite core begins to saturate, reducing effective inductance by 30%. Beyond saturation, inductance drops sharply and the inductor can no longer effectively store energy or limit ripple current. (4) Semi-Shielding: The magnetic resin coating around the drum core contains a significant portion of the magnetic flux leakage that would otherwise radiate from an unshielded inductor, reducing EMI coupling to nearby circuits while maintaining lower cost and profile than fully shielded types.

Pin Description: NRS6028T4R7MMGK Pin Definition and Functions
Pin Name Type Description
1 Terminal 1 Passive Inductor winding start
2 Terminal 2 Passive Inductor winding end
Application Scenarios: In which products and applications is NRS6028T4R7MMGK used
  • Buck converter output inductor for 12V-to-3.3V conversion at 2A load with 4.7uH inductance and 40.3mOhm DCR
  • Point-of-load power supply for FPGA core rail requiring 3A rated current and semi-shielded EMI suppression
  • Battery-powered device DC-DC stage requiring low DCR (31mOhm typ) for minimal conduction loss
  • Multi-phase interleaved buck converter with 2.7A per-phase saturation current and 39MHz SRF
Alternative Models: What chips are recommended as replacements for NRS6028T4R7MMGK
Model Manufacturer L Isat Notes
NRS6028T4R7MMGJ Taiyo Yuden 4.7uH 2.7A Same, different tolerance code
XGL4020-472ME Coilcraft 4.7uH 3.4A Shielded, 4x4mm
SRR6028-4R7Y Bourns 4.7uH 2.8A Shielded, 6x6mm
NR6028T4R7N Taiyo Yuden 4.7uH 2.7A Unshielded variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1