Opens in a new tab

NT68F63L

NOVATEK 8-bit 6502 monitor MCU, 32KB Flash, 13x 8-bit PWM, 4ch ADC, I2C, OSD, PLCC-44

3200

Effective Inventory

Image for reference only

Manufacturer Part:

NT68F63L

Package:

PLCC-44 (16.5 x 16.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NT68F63L is a Monitor Microcontroller from NOVATEK Microelectronics, designed specifically for CRT and LCD monitor control applications. Based on an 8-bit 6502 CPU core, this highly integrated MCU includes 32KB Flash memory, multiple PWM DACs for monitor brightness/contrast/color control, ADC channels for key detection, and built-in Hsync/Vsync processing. Packaged in PLCC-44, the NT68F63L is widely used in computer monitors as the OSD and control MCU.

Key Specifications

Manufacturer NOVATEK Microelectronics
Type 8-bit Monitor Microcontroller
CPU Core 6502 8-bit CPU
Flash Memory 32 KB (MTP type)
RAM 512 bytes
Boot ROM 2 KB
PWM DAC Channels 13 channels, 8-bit
ADC Channels 4 channels (for key detection)
Timers 1x 8-bit pre-loadable base timer
I2C Interfaces 2 (IIC bus interfaces)
Watchdog Timer Yes (WDT)
OSD Support On-Screen Display control
Hsync/Vsync Processor Yes (internal)
Supply Voltage 5V
Operating Temperature 0°C to +70°C (commercial)
Package PLCC-44
EDID Storage 128 bytes RAM for DDC1/2B

Features

  • 8-bit 6502 CPU core monitor microcontroller
  • 32KB Flash memory (MTP – Multiple Time Programmable)
  • 512 bytes RAM + 2KB Boot ROM
  • 13-channel 8-bit PWM DAC outputs
  • 4-channel ADC for key detection
  • Built-in Hsync and Vsync signal processor
  • Two I2C bus interfaces
  • On-screen display (OSD) control support
  • Watchdog timer for system reliability
  • EDID data in RAM (128 bytes, no external EEPROM needed)
  • Half frequency output (saves external oneshot circuit)
  • Autosync and digital control support
  • USB monitor compatible
  • PLCC-44 surface-mount compatible package

Applications

  • CRT and LCD monitor control and OSD
  • Computer monitor MCU for brightness/color control
  • Display panel timing and control
  • USB monitor implementations
  • Display DDC/EDID management
  • Monitor key scanning and user interface
  • Multi-sync monitor control systems
  • Industrial display controllers
Product Introduction: NT68F63L Product Introduction

The NT68F63L is a specialized monitor microcontroller from NOVATEK Microelectronics, designed for controlling CRT and LCD computer monitors. Built around a classic 8-bit 6502 CPU core, this highly integrated MCU provides all the functions needed for monitor control, including display timing management, On-Screen Display (OSD) support, user input handling, and DDC/EDID communication. The device features 32KB of MTP (Multiple Time Programmable) Flash memory for firmware storage, 512 bytes of RAM for working memory and stack, and 2KB of Boot ROM for factory programming. A key feature is the 13 channels of 8-bit PWM (Pulse Width Modulation) DAC outputs, which are used to control monitor parameters such as brightness, contrast, RGB gain and offset, and geometry adjustments. The 4-channel ADC is primarily used for key detection, allowing front-panel button scanning with minimal I/O pins. The built-in Hsync/Vsync signal processor handles synchronization signal detection and processing, supporting autosync multi-sync monitor operation. Two I2C bus interfaces enable communication with the display scalar chip and DDC/EDID data exchange with the host computer. The 128 bytes of RAM dedicated to EDID data eliminates the need for a separate EEPROM in many designs, reducing BOM cost.

Working Principle: NT68F63L Working Principle

The NT68F63L operates as the main control MCU in a monitor system, managing all user-facing and control functions: 1) CPU Core: The 6502 8-bit CPU executes firmware stored in the 32KB Flash memory. The 2KB Boot ROM handles initial boot and factory programming operations. 2) Timing and Sync Processing: The internal Hsync/Vsync processor receives horizontal and vertical sync signals from the video input (VGA or other analog input), measures their frequencies, and determines the display mode. This enables autosync operation where the monitor automatically adjusts to different input resolutions. 3) PWM DAC Control: The 13 8-bit PWM DACs generate analog control voltages for various monitor parameters. These are typically used for: brightness, contrast, R/G/B gain and offset controls, horizontal/vertical position and size, and other analog adjustments in CRT monitors or backlight control in LCD monitors. 4) ADC and Key Scanning: The 4-channel ADC reads the front panel keypad inputs. Typically, a resistor ladder network connects multiple buttons to a single ADC input, allowing many keys to be read with just a few ADC channels. 5) I2C Communication: The two I2C interfaces serve different purposes: – I2C0 (primary): Communication with the display scalar/graphics processor – I2C1 (secondary): DDC communication with the host computer for EDID and MCCS 6) OSD Control: The MCU controls the On-Screen Display by sending commands to the scalar chip or by directly generating simple OSD patterns, allowing the user to adjust monitor settings through an on-screen menu. 7) Watchdog Timer: The WDT monitors firmware execution and resets the MCU if the firmware hangs, improving system reliability. 8) EDID Management: 128 bytes of RAM store EDID data for DDC1/2B communication, enabling plug-and-play operation with the host computer.

Pin Description: NT68F63L Pin Definition and Functions
Pin Group Description
Port 0 (P00-P07) Port 0 I/O pins, multiplexed with DAC7-DAC12, HSYNCO, VSYNCO
Port 1 (P10-P16) Port 1 I/O pins, ADC0-1, HALFI/HALFO, interrupt inputs
Port 2 (P20-P27) Port 2 I/O pins (DB0-DB7 data bus)
Port 3 (P30-P31) Port 3 I/O pins, I2C0 SDA/SCL
DAC0-DAC6 7 additional 8-bit PWM DAC outputs
ADC2-ADC3 Additional ADC channels for key detection
VSYNCI Vertical sync input
HSYNCI Horizontal sync input
SCL1/SDA1 Second I2C bus (for DDC)
RESET Chip reset input
OSCI/OSCO Crystal oscillator pins (typically 8MHz or 12MHz)
VDD/GND Power and ground pins
Application Scenarios: In which products and applications is NT68F63L used
  • CRT and LCD computer monitor control MCUs
  • Monitor OSD (On-Screen Display) controllers
  • Multi-sync autosync monitor timing control
  • Display DDC/EDID management and communication
  • Front panel keypad scanning and user interface
  • Brightness, contrast, and color control systems
  • USB monitor implementations
  • Industrial and medical display controllers
Alternative Models: What chips are recommended as replacements for NT68F63L
Manufacturer Part Number Package Notes
NOVATEK NT68F62 DIP-40 32K Flash, similar function
NOVATEK NT68F633 QFP Updated LCD monitor MCU
NOVATEK NT68P62 PLCC OTP version
Realtek RTD2486 LQFP Integrated display controller
Genesis gm5621 LQFP Display processor with MCU

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1