Opens in a new tab

OC3SC25

10MHz OCXO, 3.3V, ±0.02ppm stability, SC-25 package, low power, industrial temp

980

Effective Inventory

Image for reference only

Manufacturer Part:

OC3SC25

Package:

SC-25 (25.0 x 25.0 x 13.0 mm, hermetically sealed metal)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OC3SC25 is a high-precision Oven-Controlled Crystal Oscillator (OCXO) from CTI (Crystal Technology Inc.) featuring a 3.3V supply voltage. Operating at 10 MHz in a compact SC-25 (25x25mm) package, this OCXO delivers exceptional frequency stability of ±0.1 ppm over the full operating temperature range. With its low-voltage operation and square-wave/sine-wave output options, the OC3SC25 is ideal for battery-powered and 3.3V-based precision timing applications including portable test equipment and embedded systems.

Key Specifications

Manufacturer CTI (Crystal Technology Inc.)
Type Oven-Controlled Crystal Oscillator (OCXO)
Frequency 10 MHz (standard)
Supply Voltage 3.3 VDC ±5%
Output Type Square Wave (CMOS compatible)
Output Logic Level 3.3V CMOS
Frequency Stability (25°C) ±0.02 ppm (typical)
Frequency Stability (Temp Range) ±0.1 ppm to ±0.5 ppm (grade dependent)
Operating Temperature -40°C to +85°C
Warm-up Time 3-5 minutes (to rated stability)
Supply Current (Steady State) ~90-150 mA typical
Supply Current (Warm-up) ~250 mA peak
Phase Noise (10kHz offset) -145 to -150 dBc/Hz
Package SC-25 (25 x 25 x 13 mm)
Frequency Adjustment VCXO control pin (optional)
Aging Rate ±0.1 to ±0.3 ppm / year

Features

  • Ultra-high frequency stability: ±0.02 ppm @ 25°C
  • 3.3V low-voltage operation
  • SC-cut crystal for optimal temperature stability
  • Square wave output (3.3V CMOS compatible)
  • Low phase noise performance
  • Wide operating temperature: -40°C to +85°C
  • Fast warm-up: 3-5 minutes
  • Voltage-controlled frequency tuning option
  • Hermetically sealed SC-25 package
  • Low aging rate
  • High reliability and long-term stability
  • RoHS compliant
  • Suitable for battery-powered systems
  • Industrial and commercial grades available

Applications

  • 3.3V-based precision timing systems
  • Portable and battery-operated test equipment
  • Wireless and IoT infrastructure timing
  • GPS modules and navigation receivers
  • Network timing and synchronization
  • SDR (Software Defined Radio) reference clocks
  • High-speed data acquisition systems
  • Telecommunications and networking equipment
Product Introduction: OC3SC25 Product Introduction

The OC3SC25 is a high-precision Oven-Controlled Crystal Oscillator (OCXO) from CTI, designed for 3.3V supply systems requiring ultra-stable frequency references. Based on SC-cut crystal technology housed within a precision temperature-controlled oven, this device achieves frequency stability of ±0.02 ppm at room temperature and maintains exceptional stability across the full industrial temperature range. The ‘OC3’ in the part number indicates a 3.3V supply voltage, while ‘SC25’ denotes the standard SC-25 package (25x25mm footprint). Compared to its 5V counterpart (OC5SC25), the OC3SC25 is optimized for lower supply voltage operation, making it ideal for modern 3.3V-based digital systems and battery-powered applications where power efficiency matters. The device uses an SC-cut quartz crystal operating at its turnover temperature (approximately 85°C), maintained by a precision oven control loop. This active temperature control virtually eliminates frequency drift caused by ambient temperature changes, providing stability levels that are orders of magnitude better than TCXOs and standard crystal oscillators. Output options include square wave (CMOS compatible) or sine wave versions. The 3.3V CMOS output is directly compatible with modern FPGAs, microcontrollers, and digital ICs without level shifting. Many OC3SC25 variants also include a voltage control (VC) pin for fine frequency adjustment, enabling applications such as GPS-disciplined oscillators (GPSDO) and phase-locked loop systems. The SC-25 hermetically sealed package provides robust protection against environmental factors including humidity, vibration, and mechanical shock, ensuring reliable operation in demanding industrial and outdoor environments.

Working Principle: OC3SC25 Working Principle

The OC3SC25 operates as an oven-controlled crystal oscillator using active thermal management to achieve extreme frequency stability: 1) SC-Cut Crystal: The heart of the oscillator is an SC-cut (Stress-Compensated, double-rotated cut) quartz crystal. SC-cut crystals exhibit an inflection point (turnover temperature) where the frequency-temperature coefficient crosses zero. Operating at this temperature minimizes frequency sensitivity to temperature variations. 2) Oscillator Circuit: A sustaining amplifier with carefully selected components drives the crystal at its series or parallel resonant frequency. The circuit design optimizes for low phase noise and high frequency stability. 3) Oven Chamber: The crystal and temperature-sensitive oscillator components are mounted inside a thermally insulated miniature oven. The oven provides a stable thermal environment, isolating the crystal from ambient temperature changes. 4) Temperature Control Loop: A precision temperature sensor (thermistor or RTD) inside the oven continuously measures the temperature and feeds back to a control amplifier. The amplifier drives a resistive heating element, adjusting power to maintain the oven at the crystal’s turnover temperature. This closed-loop control achieves temperature stabilities in the millidegree range. 5) 3.3V Power Management: The OC3SC25 is designed to operate efficiently from a 3.3V supply. Internal voltage regulation may be used for the oven control and oscillator circuits to ensure consistent performance across the supply voltage tolerance range. 6) Output Buffer Stage: A high-speed buffer amplifies and shapes the oscillator signal. For square wave versions, this produces a clean digital output with 3.3V CMOS logic levels and fast edge rates. 7) Optional VCXO Function: Versions with a voltage control pin include a varactor diode in the oscillator tank circuit. Applying a DC control voltage changes the effective capacitance seen by the crystal, allowing the output frequency to be pulled over a narrow range (typically ±2 to ±10 ppm) for calibration or synchronization purposes. 8) Warm-up and Steady State: At power-up, the oven is at ambient temperature and draws maximum current to heat up. As it approaches the setpoint, power decreases. After 3-5 minutes, the oven reaches operating temperature and the frequency stabilizes to within specification.

Pin Description: OC3SC25 Pin Definition and Functions
Pin Name Type Function
1 VCC Power +3.3V supply voltage
2 GND Ground Ground / 0V
3 OUT Output 10MHz output (square wave / 3.3V CMOS)
4 VC / AFC Input Voltage control / frequency tuning (optional)
5 GND Ground Case ground (connect to system ground)
Case Case Ground Metal case (ground for shielding)

Note: Exact pin configuration varies by manufacturer and product version. SC-25 packages typically have through-hole or surface-mount pins on the bottom. Refer to the specific manufacturer datasheet for detailed pinout.

Application Scenarios: In which products and applications is OC3SC25 used
  • 3.3V-based precision clock sources for FPGA and SoC systems
  • Portable and handheld test instruments
  • GPS/GNSS disciplined oscillators (GPSDO)
  • Software Defined Radio (SDR) reference clocks
  • Network timing cards and PTP/IEEE 1588 grandmasters
  • Battery-operated precision equipment
  • Telecommunications and optical networking
  • High-speed data converter clocking (ADC/DAC)
Alternative Models: What chips are recommended as replacements for OC3SC25
Manufacturer Part Number Package Notes
CTI OC5SC25 SC-25 5V supply version
Rakon TCXO/OCXO 10MHz Various Alternative OCXO supplier
Connor-Winfield OCXO series SC-25 / DIP Various OCXO options
Morion MV190 series SC-25 3.3V OCXO
Vectron OCXO 10MHz SC-25 High stability OCXO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1