Opens in a new tab

OCETHCJTNF-100.00000

100MHz XO crystal oscillator, CMOS, 1.8V, ±100ppm, Enable/Disable, 4-SMD 7x5mm

2150

Effective Inventory

Image for reference only

Manufacturer Part:

OCETHCJTNF-100.00000

Package:

4-SMD, No Lead (7.0 x 5.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OCETHCJTNF-100.00000 from Taitien is a 100 MHz crystal oscillator (XO) with CMOS output, operating from 1.8V supply. It features ±100ppm frequency stability, Enable/Disable function, and a 4-SMD no-lead 7.0 x 5.0mm package. The device is designed for clock generation in telecommunications and digital systems.

Key Specifications

Type XO (Standard Crystal Oscillator)
Frequency 100 MHz
Output CMOS
Supply Voltage 1.8V
Frequency Stability ±100ppm
Function Enable/Disable
Max Supply Current 25 mA
Disable Current 10 µA (maximum)
Operating Temperature -20°C to +70°C
Package 4-SMD, No Lead (7.0 x 5.0 x 1.5 mm)
Base Resonator Crystal

Features

  • 100 MHz CMOS crystal oscillator output
  • 1.8V low-voltage operation
  • ±100ppm frequency stability over temperature
  • Enable/Disable function for power management
  • Ultra-low disable current: 10µA maximum
  • 4-SMD no-lead package: 7.0 x 5.0 x 1.5mm
  • RoHS3 compliant
  • MSL 1 (unlimited floor life)
  • Crystal-based resonator for low phase noise

Applications

  • Telecommunications clock generation
  • Networking equipment timing references
  • FPGA and ASIC clock sources
  • Digital video and audio processing
  • Test and measurement equipment
  • Industrial control system timing
Product Introduction: OCETHCJTNF-100.00000 Product Introduction

The OCETHCJTNF-100.00000 from Taitien is a 100 MHz standard crystal oscillator (XO) providing CMOS output from a 1.8V supply. The device uses a crystal-based resonator for low phase noise and excellent frequency stability of ±100ppm over the -20°C to +70°C operating range. The Enable/Disable function allows system-level power management, reducing supply current to 10µA maximum when disabled. The OC series uses a 4-SMD no-lead package measuring 7.0 x 5.0 x 1.5mm, compatible with standard surface-mount assembly processes. The H in the part number denotes the 1.8V supply voltage variant, C denotes CMOS output, J denotes the temperature stability grade, and NF denotes the Enable/Disable function. The device is RoHS3 compliant with MSL 1 rating.

Working Principle: OCETHCJTNF-100.00000 Working Principle

The OCETHCJTNF-100.00000 operates through three key subsystems:

1. Crystal Resonator: An AT-cut quartz crystal provides the frequency reference at 100 MHz. The crystal operates in fundamental or overtone mode, depending on the frequency. The piezoelectric property of quartz converts electrical energy to mechanical vibration at the resonant frequency, providing high Q (>10,000) and excellent frequency stability.

2. Oscillator Circuit: An integrated sustaining amplifier maintains oscillation by compensating for crystal losses. The amplifier provides the gain and phase shift required to satisfy the Barkhausen criterion. For 100 MHz operation, the circuit typically uses a Colpitts or Butler oscillator topology with the crystal in the feedback path. A limiter circuit stabilizes the oscillation amplitude.

3. CMOS Output Buffer: The oscillator signal is buffered through a CMOS output driver that provides rail-to-rail output swing at the 1.8V supply. The output buffer isolates the crystal oscillator from load variations and provides sufficient drive current (typically 16mA) for clock distribution. The Enable/Disable function gates the output buffer, reducing supply current to 10µA when disabled.

Pin Description: OCETHCJTNF-100.00000 Pin Definition and Functions
Pin Name Type Function
1 NC / TRI-STATE Input Enable/Disable control (active high; pull high or leave open to enable)
2 GND Power Ground
3 OUTPUT Output CMOS clock output (100 MHz)
4 VDD Power Supply voltage (1.8V ±5%)
Application Scenarios: In which products and applications is OCETHCJTNF-100.00000 used
  • Telecom timing: 100 MHz CMOS output provides reference clock for SONET/SDH framers and serializers/deserializers in telecom line cards
  • FPGA clocking: 1.8V supply matches modern FPGA VCCINT voltage, enabling direct clock input without level shifting; Enable/Disable supports dynamic frequency scaling
  • Networking: ±100ppm stability meets Ethernet PHY clock requirements for 1G/10G applications; 10µA disable current for energy-efficient Ethernet
  • Digital video: 100 MHz suits HDMI, DisplayPort, and DVI pixel clock generation in video processing equipment
Alternative Models: What chips are recommended as replacements for OCETHCJTNF-100.00000
Manufacturer Part Number Package Notes
Taitien OCETGCJTNF-100.000000 4-SMD 7×5 3.3V version, ±50ppm
Taitien OCETDCJTNF-100.000000 4-SMD 7×5 3.3V, ±25ppm stability
Abracon ABLNO100MG 4-SMD 7×5 100MHz, 1.8V, CMOS
Epson SG-8002CA100.0M-PCCB 4-SMD 7×5 100MHz, programmable XO
Microchip DSC1001DE1-100.0000 4-SMD 5×3.2 100MHz, 3.3V, MEMS
Renesas XLL525100.000000I 4-SMD 7×5 100MHz, 3.3V, ±25ppm

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1