Opens in a new tab

OCJTDCJTNF-125.00000

125MHz XO crystal oscillator, CMOS, 3.3V, ±50ppm, Enable/Disable, 4-SMD 7x5mm

1840

Effective Inventory

Image for reference only

Manufacturer Part:

OCJTDCJTNF-125.00000

Package:

4-SMD, No Lead (7.0 x 5.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OCJTDCJTNF-125.00000 from Taitien is a 125 MHz crystal oscillator (XO) with CMOS output, operating from 3.3V supply. It features ±50ppm frequency stability, Enable/Disable function, and a 4-SMD no-lead 7.0 x 5.0mm package. Designed for high-speed digital system clock generation.

Key Specifications

Type XO (Standard Crystal Oscillator)
Frequency 125 MHz
Output CMOS
Supply Voltage 3.3V
Frequency Stability ±50ppm
Function Enable/Disable
Max Supply Current 20 mA
Operating Temperature -20°C to +70°C
Package 4-SMD, No Lead (7.0 x 5.0 x 1.5 mm)
Base Resonator Crystal
RoHS ROHS3 Compliant

Features

  • 125 MHz CMOS crystal oscillator output
  • 3.3V supply voltage operation
  • ±50ppm frequency stability over temperature
  • Enable/Disable function for power management
  • 4-SMD no-lead package: 7.0 x 5.0 x 1.5mm
  • Crystal-based resonator for low phase noise
  • RoHS3 compliant
  • MSL 1 (unlimited floor life)
  • Tri-state output when disabled

Applications

  • Networking equipment clock generation
  • High-speed digital system timing
  • FPGA and processor clock references
  • Serial communication interfaces
  • Video processing and display systems
  • Test and measurement instrumentation
Product Introduction: OCJTDCJTNF-125.00000 Product Introduction

The OCJTDCJTNF-125.00000 from Taitien is a 125 MHz standard crystal oscillator providing CMOS output from a 3.3V supply. The device achieves ±50ppm frequency stability over the -20°C to +70°C operating range using a crystal-based resonator for low phase noise performance. The OCJ series offers an Enable/Disable function with tri-state output, enabling system-level power management and clock gating. The D in the part number denotes the ±50ppm stability grade, C denotes CMOS output, and the J temperature grade covers -20°C to +70°C. The 4-SMD no-lead package (7.0 x 5.0 x 1.5mm) is compatible with standard surface-mount assembly. The device is RoHS3 compliant with MSL 1 rating.

Working Principle: OCJTDCJTNF-125.00000 Working Principle

The OCJTDCJTNF-125.00000 operates through three key subsystems:

1. Crystal Resonator: An AT-cut quartz crystal operating in overtone mode provides the 125 MHz frequency reference. At this frequency, the crystal typically operates in its 3rd or 5th overtone mode, as fundamental mode crystals above 50 MHz become impractically thin. The overtone selection circuit ensures oscillation at the desired overtone rather than the fundamental.

2. Oscillator and Limiter: The sustaining amplifier provides the gain required to maintain oscillation. An amplitude limiter circuit stabilizes the loop gain, preventing crystal overdrive that could cause frequency drift or accelerated aging. The oscillator circuit includes overtone mode selection components (LC tank) to suppress unwanted modes.

3. CMOS Output Buffer: A CMOS output driver provides rail-to-rail output swing at 3.3V with symmetric rise/fall times. The output buffer is designed to drive 15pF loads with minimal jitter. The Enable/Disable function puts the output in tri-state (high-impedance) when disabled, allowing multiple oscillators to share a single clock line.

Pin Description: OCJTDCJTNF-125.00000 Pin Definition and Functions
Pin Name Type Function
1 NC / TRI-STATE Input Enable/Disable control (active high; pull high or leave open to enable)
2 GND Power Ground
3 OUTPUT Output CMOS clock output (125 MHz)
4 VDD Power Supply voltage (3.3V ±5%)
Application Scenarios: In which products and applications is OCJTDCJTNF-125.00000 used
  • Networking: 125 MHz reference clock for Gigabit Ethernet PHYs and 10GbE serializers; ±50ppm stability meets IEEE 802.3 clock accuracy requirements
  • FPGA clocking: 125 MHz is a standard Ethernet reference frequency; CMOS output directly drives FPGA clock input pins at 3.3V LVCMOS levels
  • Video processing: 125 MHz suits HD video pixel clock generation and DVI/HDMI transmitter reference clocks
  • Clock distribution: Tri-state output when disabled allows redundant clock source selection via external multiplexer for high-availability systems
Alternative Models: What chips are recommended as replacements for OCJTDCJTNF-125.00000
Manufacturer Part Number Package Notes
Taitien OCETDCJTNF-125.000000 4-SMD 7×5 3.3V, ±25ppm, higher stability
Taitien OXJTGLKTNF-125.000000 4-SMD 3.2×2.5 2.5V, ±50ppm, smaller
Epson SG-8002CA125.0M-PCMB 4-SMD 7×5 125MHz, programmable XO
Abracon ABLNO125MG 4-SMD 7×5 125MHz, 3.3V, CMOS
Renesas XLL525125.000000I 4-SMD 7×5 125MHz, 3.3V, ±25ppm
Microchip DSC1001CI1-125.0000 4-SMD 5×3.2 125MHz, MEMS, 3.3V

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1