Opens in a new tab

Home » Analog Linear ICs » OPA191IDBVT

OPA191IDBVT

36V precision CMOS op-amp, +/-5uV Vos, 0.1uV/C drift, 140dB CMRR, 2.5MHz, SOT-23-5

8450

Effective Inventory

Image for reference only

Manufacturer Part:

OPA191IDBVT

Package:

SOT-23-5 (2.90 x 1.60 x 1.15 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA191IDBVT from Texas Instruments is a 36V, low-power, precision CMOS operational amplifier with +/-5uV offset, 0.1uV/°C drift, 140dB CMRR, 2.5MHz GBW, and rail-to-rail input/output in a SOT-23-5 package.

Key Specifications

Channels 1 (Single)
Supply Voltage 4.5 V to 36 V (or +/-2.25V to +/-18V)
Offset Voltage +/-5 uV typical, +/-25 uV max (25°C)
Offset Drift 0.1 uV/°C typical
Input Bias Current +/-5 pA typical, 20 pA max
CMRR 140 dB typical
GBW 2.5 MHz
Slew Rate 5.5 V/us
Noise (1kHz) 15 nV/sqrtHz
Quiescent Current 140 uA per amplifier
Output Current +/-65 mA
Capacitive Load Drive 1 nF
Operating Temperature -40°C to +125°C
Package SOT-23-5 (DBV)

Features

  • +/-5uV offset with 0.1uV/°C drift using e-trim technology for precision applications
  • 36V supply range with 140dB CMRR and rail-to-rail input/output

Applications

  • Precision analog input modules and data acquisition systems
Product Introduction: OPA191IDBVT Product Introduction

The OPA191IDBVT from Texas Instruments is a single-channel, 36V, low-power, precision CMOS operational amplifier using TI’s e-trim technology to achieve +/-5uV typical offset voltage and 0.1uV/C drift without laser trimming. The device features rail-to-rail input and output operation, 140dB CMRR, 15nV/sqrtHz voltage noise at 1kHz, and 2.5MHz gain-bandwidth product. The 5.5V/us slew rate and +/-65mA output current make it suitable for driving moderate loads. The device supports differential input voltage to the supply rails without phase reversal, and can drive up to 1nF capacitive loads without oscillation. The 140uA per-channel quiescent current minimizes power dissipation in high-voltage applications. The SOT-23-5 package provides the smallest footprint for single op-amp precision applications. EMI/RFI filtered inputs reduce susceptibility to electromagnetic interference in industrial environments.

Working Principle: OPA191IDBVT Working Principle

The OPA191IDBVT is a precision CMOS operational amplifier using e-trim technology. (1) e-Trim: The offset voltage is trimmed during final wafer test using electronic fuses that adjust internal trim networks, achieving +/-5uV typical without the complexity and cost of laser trimming. (2) Rail-to-Rail Input: A complementary input stage uses both P-channel and N-channel differential pairs. The P-channel pair operates for common-mode voltages near the negative rail, while the N-channel pair operates near the positive rail. In the transition region, both pairs are active and their offsets partially cancel. (3) Rail-to-Rail Output: The output stage uses a common-source configuration that can swing to within 5mV of either supply rail at light loads. (4) EMI Filtering: Internal low-pass filters on the input pins reject high-frequency electromagnetic interference, reducing the output offset shift caused by rectified RF signals. (5) Differential Input Protection: The device allows differential input voltages up to the supply rails without damage or phase reversal, a common failure mode in legacy op-amps.

Pin Description: OPA191IDBVT Pin Definition and Functions
Pin Name Function
1 OUT Amplifier output
2 V- Negative supply / ground
3 IN+ Non-inverting input
4 IN- Inverting input
5 V+ Positive supply (up to 36V)
Application Scenarios: In which products and applications is OPA191IDBVT used
  • Precision analog input modules with 36V supply and +/-5uV offset
  • Pressure transducer and strain gage amplifiers with 140dB CMRR
  • High-voltage data acquisition and measurement in SOT-23-5
Alternative Models: What chips are recommended as replacements for OPA191IDBVT
Manufacturer Part Number Package Notes
TI OPA2191IDR SOIC-8 Dual channel version
TI OPA192IDBVT SOT-23-5 Chopper-stabilized, lower drift
ADI ADA4510-1AKSZ SC-70-6 36V, 1uV offset, smaller

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1