Opens in a new tab

OPA2227U

Dual Low-Noise Op Amp, 3nV/sqrtHz, +/-10uV Vos, SOIC-8, Gain>=5

4567

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2227U

Package:

SOIC-8 (5.0 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2227U from Texas Instruments is a dual low-noise precision operational amplifier with 3 nV/sqrt(Hz) noise, 2.5 V/us slew rate, and +/-10 uV offset in a DIP-8 or SOIC-8 package.

Key Specifications

Type Dual Low-Noise Precision Operational Amplifier
Channels 2
Supply Voltage +/-5 V to +/-18 V
Voltage Noise 3 nV/sqrt(Hz) @ 1kHz
Input Offset Voltage +/-10 uV (max, A grade)
Offset Drift 0.1 uV/C (typical)
Gain Bandwidth Product 8 MHz
Slew Rate 2.5 V/us
CMRR 114 dB (min, A grade)
Open-Loop Gain 120 dB (min)
Supply Current per Channel 3.7 mA (typical)
Package SOIC-8
Operating Temperature -40C to +85C

Features

  • Ultra-low 3 nV/sqrt(Hz) voltage noise
  • +/-10 uV max offset voltage (A grade)
  • 0.1 uV/C typical offset drift
  • 114 dB minimum CMRR
  • 120 dB minimum open-loop gain
  • De-compensated (stable for gains >= 5)
  • Drop-in upgrade for OP27/OP37

Applications

  • Precision audio preamplifiers
  • Low-noise instrumentation front-ends
  • Professional microphone amplifiers
  • Data acquisition signal conditioning
Product Introduction: OPA2227U Product Introduction

The OPA2227U from Texas Instruments is a dual low-noise precision operational amplifier optimized for audio and instrumentation applications. The 3 nV/sqrt(Hz) voltage noise at 1 kHz is among the lowest available for bipolar input op amps, making it ideal for low-source-impedance signal chains. The +/-10 uV maximum offset voltage (A grade) and 0.1 uV/C typical drift eliminate the need for external trimming. The 114 dB minimum CMRR and 120 dB minimum open-loop gain ensure accurate signal processing in precision differential circuits. Note that the OPA2227 is de-compensated and requires a minimum closed-loop gain of 5 for stability; for unity-gain applications, use the OPA2228 (identical except for compensation).

Working Principle: OPA2227U Working Principle

The OPA2227U uses a super-beta bipolar input stage with bias-current cancellation to achieve both low voltage noise (3 nV/sqrt(Hz)) and relatively low input bias current. The super-beta transistors have a current gain (beta) approximately 10x higher than standard NPN transistors, reducing the base current and therefore the input bias current. The bias-current cancellation circuit uses a current mirror to inject a compensating current that cancels the base current of the input transistors. The de-compensated architecture reduces the internal compensation capacitor compared to a unity-gain-stable design, providing higher bandwidth (8 MHz GBW) and faster slew rate (2.5 V/us) at the cost of requiring a minimum gain of 5 for stability. The low voltage noise is achieved through careful optimization of the input pair collector current and transistor geometry. The output stage uses a class AB push-pull configuration capable of driving 600 Ohm loads with low distortion.

Pin Description: OPA2227U Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VS- Power Negative supply
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 VS+ Power Positive supply
Application Scenarios: In which products and applications is OPA2227U used
  • Dual-channel professional microphone preamp with 3nV noise floor
  • Precision instrumentation amplifier with 114dB CMRR
  • Phono cartridge RIAA equalizer with ultra-low noise
  • 16-bit ADC driver with gain >= 5 for sensor conditioning
Alternative Models: What chips are recommended as replacements for OPA2227U
Manufacturer Part Number Package Notes
TI OPA2228U SOIC-8 Unity-gain stable version
TI OPA227U SOIC-8 Single version
ADI OP270FZ SOIC-8 Dual low noise, similar class
TI OPA2134PA DIP-8 JFET input, audio, lower noise
TI LM4562NA DIP-8 2.7nV, audio op amp, unity stable

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1