Opens in a new tab

OPA2343UA/2K5

Dual RRIO CMOS Op Amp, 5.5MHz, 1pA IB, +/-1mV Vos, SOIC-8

4567

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2343UA/2K5

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2343UA/2K5 from Texas Instruments is a dual 5.5MHz rail-to-rail CMOS op amp with 1pA input bias current and +/-1mV offset in an SOIC-8 package.

Key Specifications

Type Dual Rail-to-Rail CMOS Operational Amplifier
Channels 2
Supply Voltage 2.5 V to 5.5 V (single)
Gain Bandwidth Product 5.5 MHz
Slew Rate 6 V/us
Input Offset Voltage +/-1 mV (max)
Input Bias Current 1 pA (typical)
CMRR 80 dB (typical)
Supply Current per Channel 1.5 mA (typical)
Input/Output Rail-to-Rail
Package SOIC-8
Operating Temperature -40C to +85C

Features

  • Rail-to-rail input and output
  • 5.5 MHz gain bandwidth product
  • 1 pA input bias current (CMOS input)
  • +/-1 mV max offset voltage
  • 2.5V to 5.5V single supply
  • Unity-gain stable

Applications

  • Piezoelectric sensor amplifiers
  • Photodiode transimpedance amplifiers
  • Battery-powered signal conditioning
  • High-impedance buffer amplifiers
Product Introduction: OPA2343UA/2K5 Product Introduction

The OPA2343UA/2K5 from Texas Instruments is a dual rail-to-rail input/output CMOS operational amplifier with 5.5 MHz gain bandwidth product and 1 pA typical input bias current. The CMOS input stage provides virtually zero input current, making it ideal for high-impedance sensor interfaces such as piezoelectric transducers and photodiode amplifiers. The rail-to-rail input and output capability maximizes dynamic range in single-supply applications from 2.5V to 5.5V. The +/-1 mV maximum offset voltage and 80 dB CMRR support precision signal processing. The 5.5 MHz bandwidth and 6 V/us slew rate enable active filter and signal conditioning applications at frequencies well beyond DC.

Working Principle: OPA2343UA/2K5 Working Principle

The OPA2343UA/2K5 uses a CMOS input stage with complementary P-channel and N-channel differential pairs to achieve rail-to-rail input common-mode range. The transition between the two pairs occurs at a crossover voltage near mid-supply. The folded-cascode gain stage provides the high DC gain needed for low offset and high CMRR. The output stage uses complementary P-channel and N-channel MOSFETs in a push-pull configuration that swings to within a few millivolts of both supply rails at light loads. The 1 pA input bias current is inherent to the MOSFET gate input, where the gate oxide provides virtually infinite DC input resistance. The internal compensation ensures unity-gain stability. The /2K5 suffix indicates tape and reel packaging with 2500 devices per reel.

Pin Description: OPA2343UA/2K5 Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 V- Power Negative supply / GND
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 V+ Power Positive supply (2.5-5.5V)
Application Scenarios: In which products and applications is OPA2343UA/2K5 used
  • Dual photodiode transimpedance amplifier with 1pA bias current for optical receiver
  • Piezoelectric accelerometer charge amplifier with rail-to-rail output
  • pH electrode dual buffer amplifier with ultra-low input current
  • 3.3V dual-channel active filter for ADC anti-aliasing
Alternative Models: What chips are recommended as replacements for OPA2343UA/2K5
Manufacturer Part Number Package Notes
TI OPA2340UA/2K5 SOIC-8 5.5MHz, similar, higher supply range
Microchip MCP6022-I/SN SOIC-8 10MHz, RRIO, CMOS, similar
TI OPA2320AIDR SOIC-8 20MHz, low noise, upgrade
TI OPA2348AIDR SOIC-8 1MHz, lower power, RRIO
ADI ADA4505-2AKSZ MSOP-8 Zero-drift, 1pA, upgrade

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1