Opens in a new tab

OSC5A2B04

5MHz high-precision oscillator, ±10ppm stability, -145dBc/Hz phase noise, SMD 7x5mm

5600

Effective Inventory

Image for reference only

Manufacturer Part:

OSC5A2B04

Package:

SMD 7.0 x 5.0 mm (DIP-8 compatible footprint)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OSC5A2B04 is a 5 MHz high-precision crystal oscillator module offering enhanced frequency stability for demanding timing applications. Building on the proven design of the OSC5A2 series, this variant provides tighter frequency tolerance of ±10 ppm over the full operating temperature range, making it suitable for precision instrumentation, telecommunications infrastructure, and high-accuracy data acquisition systems. The standard 7×5 mm surface-mount package ensures drop-in compatibility with existing oscillator footprints while delivering improved timing performance.

Key Specifications

Nominal Frequency 5 MHz
Frequency Stability ±10 ppm over temperature
Supply Voltage 3.3V (2.4V to 3.6V)
Output Type CMOS / LVTTL compatible
Output Enable Active high / tri-state
Phase Noise -145 dBc/Hz @ 1 kHz offset
Operating Temperature -40°C to +85°C
Supply Current 9 mA (typ)
Package Type SMD 7.0 x 5.0 mm (DIP-8 footprint)
Aging ±2 ppm / year (max)

Features

  • 5 MHz output with ±10 ppm enhanced stability
  • Low phase noise: -145 dBc/Hz @ 1 kHz offset
  • Reduced aging rate: ±2 ppm/year maximum
  • Wide voltage range: 2.4V to 3.6V operation
  • CMOS/LVTTL compatible output
  • Tri-state output enable function
  • Industry-standard 7×5 mm SMD package
  • Extended temperature: -40°C to +85°C

Applications

  • Precision test and measurement equipment
  • Telecommunications infrastructure
  • High-accuracy data acquisition systems
  • GPS and navigation receivers
  • Medical diagnostic instruments
  • Scientific research equipment
  • Frequency reference sources
  • Network timing and synchronization
Product Introduction: OSC5A2B04 Product Introduction

The OSC5A2B04 is a high-precision 5 MHz crystal oscillator module engineered for applications demanding exceptional frequency accuracy and stability. Offering ±10 ppm frequency stability across the full operating temperature range of -40°C to +85°C, this device represents a significant performance upgrade over standard ±20 ppm oscillators. The enhanced precision is achieved through tighter manufacturing tolerances on the quartz crystal resonator and optimized oscillator circuit design that minimizes frequency drift due to voltage and temperature variations. Phase noise performance is also improved, with a specification of -145 dBc/Hz at 1 kHz offset, ensuring clean output signals with minimal spurious content for sensitive RF and high-speed digital applications. Long-term frequency aging is rated at ±2 ppm per year maximum, providing sustained accuracy throughout the product’s service life. Housed in the industry-standard 7.0 x 5.0 mm surface-mount package, the OSC5A2B04 offers drop-in compatibility with existing PCB layouts, enabling easy performance upgrades without board redesign. The CMOS output with tri-state control provides design flexibility for power management and clock distribution architectures.

Working Principle: OSC5A2B04 Working Principle

The OSC5A2B04 generates its precise 5 MHz output through the piezoelectric resonance of a high-grade AT-cut quartz crystal. The crystal is manufactured with tighter dimensional tolerances than standard oscillators, enabling the ±10 ppm initial frequency tolerance. The oscillator circuit uses a refined Pierce topology with carefully matched internal load capacitors and low-noise active components to maintain frequency stability across temperature and supply voltage variations. The internal circuitry includes a low-dropout voltage regulator that provides a clean, stable supply voltage to the oscillator core, significantly improving power supply rejection ratio and reducing the impact of supply noise on output phase noise. A temperature compensation network optimizes the oscillator’s operating point across temperature, contributing to the tight ±10 ppm stability specification. The output buffer is designed with low-jitter CMOS circuitry to preserve the oscillator’s inherent low phase noise characteristics while providing sufficient drive strength. The output enable feature allows the output to be placed in a high-impedance state, enabling multiplexed clock distribution schemes and power-saving modes in battery-operated equipment.

Pin Description: OSC5A2B04 Pin Definition and Functions
Pin Name Type Function
1 OE Input Output Enable: logic high enables output, low tri-states
2 GND Power Ground connection (0V reference)
3 OUT Output 5 MHz buffered clock output (CMOS/LVTTL)
4 VCC Power Positive supply voltage (3.3V nominal, 2.4-3.6V range)
5-8 GND Power Additional ground pins for shielding and heat dissipation
Application Scenarios: In which products and applications is OSC5A2B04 used
  • High-precision test and measurement instrumentation
  • Telecommunications base stations and network infrastructure
  • GPS/GNSS receivers and navigation systems
  • High-resolution data acquisition and digitizers
  • Medical imaging and diagnostic equipment
  • Network timing and synchronization (PTP/SyncE)
Alternative Models: What chips are recommended as replacements for OSC5A2B04
Manufacturer Part Number Package Notes
SiTime SiT5356 7x5mm SMD High-stability MEMS OCXO alternative
Rakon IT2200BA 7x5mm SMD 5MHz TCXO, ±0.5ppm, high precision
Abracon ASTMK-5.000MHZ 7x5mm SMD 5MHz VCTCXO, ±2ppm stability
Micro Crystal CM7V-T1A 7x5mm SMD 5MHz CMOS oscillator, ±10ppm

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1