Opens in a new tab

PBSS8110T

100V 1A NPN low VCEsat transistor, hFE 150-500, SOT-23

17400

Effective Inventory

Image for reference only

Manufacturer Part:

PBSS8110T

Package:

SOT-23 (TO-236AB, 2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PBSS8110T from Nexperia is a 100V, 1A NPN low VCEsat (BISS) transistor in SOT-23 with high current gain (hFE 150-500) and low saturation voltage for power switching applications.

Key Specifications

Type NPN Low VCEsat (BISS) Transistor
VCEO 100V
IC (max) 1A (continuous)
VCEsat 90mV (typ) @ IC=500mA, IB=50mA
hFE 150 ~ 500 @ IC=100mA
fT 100 MHz (min)
Ptot 300mW
PNP Complement PBSS9110T
Package SOT-23 (TO-236AB)
Operating Temperature -65 to +150 C

Features

  • Very low VCEsat (90mV typ) reduces conduction losses
  • High current gain (hFE 150-500) for low base drive
  • 100V VCEO suitable for 48V automotive systems

Applications

  • DC-DC converter load switches
  • Automotive 42V power switching
  • Peripheral drivers (lamps, LEDs, relays)
  • Inductive load drivers
Product Introduction: PBSS8110T Product Introduction

The PBSS8110T from Nexperia is a 100V, 1A NPN bipolar junction transistor from the BISS (Breakthrough In Small Signal) product family, optimized for extremely low collector-emitter saturation voltage (VCEsat). The 90mV typical VCEsat at 500mA collector current is dramatically lower than conventional small-signal transistors (which typically have 200-600mV VCEsat), resulting in significantly lower conduction losses and higher efficiency in switching applications. This low VCEsat is achieved through Nexperia’s advanced silicon technology and a special transistor structure that reduces the collector resistance. The high current gain (hFE 150-500 at 100mA) means that even high collector currents can be driven with modest base currents, simplifying the driver circuit design. The 100V VCEO rating makes this device suitable for 48V automotive power systems (which require components rated for at least 2x the nominal voltage for load dump protection). The PNP complement PBSS9110T enables push-pull and half-bridge configurations. The compact SOT-23 package provides high power density in a small footprint, making it ideal for space-constrained applications where a MOSFET might be oversized.

Working Principle: PBSS8110T Working Principle

The PBSS8110T operates as an NPN bipolar junction transistor optimized for low saturation voltage. Key characteristics include: (1) Low VCEsat Structure – the transistor uses a heavily doped collector region and optimized epitaxial layer thickness to minimize the collector series resistance; in saturation (when both base-emitter and base-collector junctions are forward-biased), the collector current flows through this low-resistance path, resulting in only 90mV voltage drop at 500mA; this is approximately 3-6x lower than conventional transistors like BC847; (2) High hFE – the current gain of 150-500 at 100mA means the transistor requires only 0.33-0.67mA base current to drive 100mA collector current; at 500mA, the required base current is approximately 50mA for guaranteed saturation; (3) Saturation Operation – to ensure low VCEsat, the base current must be sufficient to drive the transistor into deep saturation (IB > IC/hFE); the forced beta (IC/IB) should be 10-20 for optimal saturation; (4) Switching – the 100MHz transition frequency supports fast switching; the turn-on time is limited by the base charge time; the turn-off time is limited by the stored charge in the saturated collector-base junction; a negative base current or resistive base drive can speed up turn-off.

Pin Description: PBSS8110T Pin Definition and Functions
Pin Name Function
1 B Base
2 E Emitter
3 C Collector
Application Scenarios: In which products and applications is PBSS8110T used
  • 48V automotive load switch: VCEsat=90mV at 500mA means only 45mW conduction loss, far less than MOSFET gate drive loss at low duty cycle
  • DC-DC converter: replace small MOSFET in low-power buck converter where BJT lower cost and no gate drive needed
  • Relay driver: high hFE allows direct MCU GPIO drive (3.3V GPIO can drive 100mA relay through 1kOhm base resistor)
  • LED string driver: 100V VCEO supports long LED strings, low VCEsat minimizes heatsink requirement
Alternative Models: What chips are recommended as replacements for PBSS8110T
Manufacturer Part Number Package Notes
Nexperia PBSS9110T SOT-23 PNP complement
Nexperia PBSS8110T,215 SOT-23 Same, tape and reel
Nexperia PBSS8110S SOT-223 Higher power (1.5W)
onsemi FMMT619 SOT-23 80V NPN low VCEsat alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1