Opens in a new tab

PCA82C251T/YM

1Mbps CAN transceiver, ISO 11898, SO-8, slope control, industry standard, automotive proven

9114

Effective Inventory

Image for reference only

Manufacturer Part:

PCA82C251T/YM

Package:

SO-8 (4.90 x 3.90 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCA82C251T/YM from NXP is a high-speed CAN transceiver in a SO-8 package. As the industry-standard CAN physical layer device, it provides the interface between the CAN protocol controller and the bus at up to 1Mbps with proven reliability.

Key Specifications

Protocol CAN 2.0A/B (ISO 11898)
Data Rate Up to 1 Mbps
Supply Voltage 4.75 V to 5.25 V
Bus Common Mode -12V to +12V
Standby Current 1.5 mA (maximum)
Operating Temperature -40C to +125C

Features

  • ISO 11898 compliant CAN transceiver at 1Mbps data rate
  • Industry-standard SO-8 pinout compatible with many CAN transceivers
  • Slope control for reduced EMI at lower data rates
  • Thermal protection and short-circuit proof bus pins
  • -12V to +12V common mode range for noisy automotive environments
  • Proven reliability with millions of automotive CAN nodes deployed

Applications

  • Automotive CAN bus network nodes (classic standard)
  • Industrial CAN bus communication systems
  • Marine and agricultural vehicle CAN networks
  • Building automation CAN bus backbones
Product Introduction: PCA82C251T/YM Product Introduction

The PCA82C251T/YM from NXP Semiconductors is the industry-standard high-speed CAN transceiver in a SO-8 package. As the successor to the legendary PCA82C250, the PCA82C251 provides the physical layer interface between the CAN protocol controller and the differential bus, fully compliant with the ISO 11898 standard at data rates up to 1Mbps. The device has been deployed in millions of automotive CAN nodes worldwide, establishing it as one of the most reliable and well-characterized CAN transceivers available. The SO-8 pinout is compatible with many newer CAN transceivers (TJA1050, SN65HVD230, etc.), enabling easy upgrades. Slope control functionality allows reduction of the output slew rate at lower data rates, minimizing EMI without external filtering. The bus pins are short-circuit proof to battery voltage and ground, and thermal protection shuts down the transmitter if the junction temperature exceeds the safe limit. The -12V to +12V common mode input range accommodates ground shifts between CAN nodes in automotive environments.

Working Principle: PCA82C251T/YM Working Principle

The PCA82C251T/YM converts between the MCU digital CAN signals and the differential bus. (1) Transmit: When TXD is driven low (dominant), the transceiver drives CANH to approximately 3.5V and CANL to approximately 1.5V (with 5V supply), creating a ~2V differential. When TXD is high (recessive), both outputs are high-impedance and biased to 2.5V through internal biasing. (2) Receive: The differential receiver monitors the CANH-CANL voltage. A differential above ~0.9V drives RXD low (dominant). Below the threshold, RXD is high (recessive). (3) Slope Control: The Rs pin controls the output slew rate. When Rs is connected to ground through a resistor (typically 10-100kOhm), the output edges are slowed, reducing high-frequency EMI. When Rs is directly grounded, the transceiver operates at maximum speed. (4) Thermal Protection: If the die temperature exceeds approximately 160C, the transmitter is disabled. This protects the device during sustained bus fault conditions.

Pin Description: PCA82C251T/YM Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input (from CAN controller)
2 GND Ground Ground
3 VCC Power 5V supply
4 RXD Output Receive data output (to CAN controller)
5 VREF Output Reference voltage output (VCC/2)
6 CANL I/O CAN bus low
7 CANH I/O CAN bus high
8 Rs Input Slope control resistor input
Application Scenarios: In which products and applications is PCA82C251T/YM used
  • Automotive CAN bus network nodes using the industry-standard transceiver
  • Industrial CAN bus communication systems with slope control for EMI
  • Marine and agricultural vehicle CAN networks with thermal protection
  • Building automation CAN bus backbones with proven reliability
Alternative Models: What chips are recommended as replacements for PCA82C251T/YM
Manufacturer Part Number Package Notes
NXP TJA1050T SO-8 Direct upgrade, improved EMC
Microchip MCP2551-I/SN SOIC-8 Popular equivalent
TI SN65HVD230DR SOIC-8 3.3V version
NXP TJA1042T SO-8 CAN FD capable upgrade

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1