Opens in a new tab

Home » Integrated Circuits ICs » PCA9617ADPJ

PCA9617ADPJ

I2C differential buffer, 1Mbps, 30m cable, TSSOP-8

5377

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9617ADPJ

Package:

TSSOP-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCA9617ADPJ from NXP is an I2C/SMBus differential buffer that converts single-ended I2C signals to differential signaling, enabling long-distance (up to 30m) I2C bus extension at up to 1 Mbps. It provides galvanic isolation between local and remote bus segments.

Key Specifications

Function I2C/SMBus differential buffer
Bus Extension Up to 30m cable at 1Mbps
Data Rate Up to 1 Mbps
Supply Voltage 2.3V to 5.5V
Isolation Galvanic isolation via differential pair
Package TSSOP-8 (4.4x3mm)

Working Principle

On the local side, standard I2C single-ended SDA/SCL are converted to differential pairs (SDA_P/SDA_N, SCL_P/SCL_N) for transmission over twisted-pair cable. On the remote side, differential signals are converted back to single-ended I2C. This extends the I2C bus well beyond the typical 1-2m limit while providing noise immunity.

Applications

  • Long-distance I2C bus extension
  • Industrial sensor networks
  • Cable-based I2C communication
  • Multi-board I2C backplane
Product Introduction: PCA9617ADPJ Product Introduction

The PCA9617ADPJ from NXP is an I2C/SMBus differential buffer that converts single-ended I2C signals to differential signaling, enabling long-distance (up to 30m) I2C bus extension at up to 1 Mbps. It provides galvanic isolation between local and remote bus segments.

Working Principle: PCA9617ADPJ Working Principle

On the local side, standard I2C single-ended SDA/SCL are converted to differential pairs (SDA_P/SDA_N, SCL_P/SCL_N) for transmission over twisted-pair cable. On the remote side, differential signals are converted back to single-ended I2C. This extends the I2C bus well beyond the typical 1-2m limit while providing noise immunity.

Pin Description: PCA9617ADPJ Pin Definition and Functions
Pin Name Description
1 SDA Local I2C data
2 SCL Local I2C clock
3 GND Ground
4 VDD Supply
5 SDA_N Differential data negative
6 SCL_N Differential clock negative
7 SCL_P Differential clock positive
8 SDA_P Differential data positive
Application Scenarios: In which products and applications is PCA9617ADPJ used
  • Long-distance I2C bus extension
  • Industrial sensor networks
  • Cable-based I2C communication
  • Multi-board I2C backplane
Alternative Models: What chips are recommended as replacements for PCA9617ADPJ
Model Manufacturer Key Difference
P82B96 NXP I2C bus buffer, non-differential

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1