Opens in a new tab

PESD1CAN

Dual CAN bus ESD protection diode, 24V standoff, 23kV ESD, SOT-23

11311

Effective Inventory

Image for reference only

Manufacturer Part:

PESD1CAN

Package:

SOT-23 (TO-236AB, 2.9 x 1.3 x 1.0 mm, 3 leads)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PESD1CAN from Nexperia is a CAN bus ESD protection diode in SOT-23 that protects two automotive CAN bus lines up to 23kV ESD with low clamping voltage and ultra-low leakage.

Key Specifications

Function CAN Bus ESD Protection Diode
Channels 2 (protects 2 CAN lines)
Reverse Standoff Voltage (VRWM) 24V
Breakdown Voltage (VBR) 25.4V ~ 30.3V @ 5mA
Clamping Voltage (VCL) 40V @ IPP=1A; 70V @ IPP=3A
ESD Protection Up to 23kV (IEC 61000-4-2 contact)
Peak Pulse Current (IPP) 3A @ 8/20us
Peak Pulse Power (PPP) 200W @ 8/20us
Leakage Current (IRM) <1nA (typ) / 50nA (max)
Diode Capacitance (Cd) 11pF (typ) @ 1MHz
Capacitance Matching 0.1% (typ)
Package SOT-23 (TO-236AB)
Operating Temperature -65 to +150 C

Features

  • Protects two CAN bus lines in one SOT-23 package
  • ESD protection up to 23kV (IEC 61000-4-2 Level 4)
  • Ultra-low leakage current (<1nA typical)
  • 0.1% capacitance matching for CAN signal integrity
  • AEC-Q101 qualified (automotive grade)

Applications

  • Automotive CAN bus ESD protection
  • Industrial CAN network protection
  • Controller Area Network transceiver protection
Product Introduction: PESD1CAN Product Introduction

The PESD1CAN from Nexperia is a dedicated ESD protection diode array designed specifically for protecting two Controller Area Network (CAN) bus lines from electrostatic discharge and other transient voltage events in automotive and industrial applications. The device integrates two steering diodes in a single SOT-23 package, with both cathodes connected to a common ground pin (pin 3), providing a compact and cost-effective solution for bidirectional CAN bus protection. The 24V reverse standoff voltage is compatible with both 5V and 12V CAN bus systems, while the 25.4-30.3V breakdown voltage ensures the protection device does not conduct during normal CAN bus operation (which uses 2.5V typical common-mode voltage with 1V differential). The ultra-low leakage current of less than 1nA typical ensures the protection device does not load the CAN bus or affect the transceiver’s recessive bus state. The 0.1% typical capacitance matching between the two diodes is critical for maintaining the symmetry and signal integrity of the differential CAN bus, preventing common-mode to differential-mode conversion that would degrade EMC performance. The device provides ESD protection up to 23kV per IEC 61000-4-2 (contact discharge), far exceeding the 8kV Level 4 requirement, making it suitable for harsh automotive environments.

Working Principle: PESD1CAN Working Principle

The PESD1CAN operates as a bidirectional transient voltage suppression device for CAN bus lines. Key subsystems include: (1) Steering Diode Pair – two identical steering diodes are connected between each CAN line (CANH and CANL) and a common ground; the diodes are normally reverse-biased at the CAN bus common-mode voltage (typically 2.5V), well below the 24V standoff voltage; when a positive transient exceeds the breakdown voltage (25.4V min), the diode avalanches and clamps the voltage; when a negative transient pulls the line below -0.6V, the diode forward-biases and clamps; (2) ESD Clamping – during an ESD event, the fast-rising transient (0.7-1ns rise time) is clamped by the diode’s avalanche mechanism; the clamping voltage at 1A (40V) is well below the CAN transceiver’s maximum rating (typically -27V to +40V), protecting the transceiver; at higher currents (3A surge), the clamping voltage rises to 70V; (3) Capacitance Matching – the 0.1% typical capacitance matching between the two diodes ensures that CANH and CANL see identical capacitive loading, which is critical for the differential signaling scheme; any mismatch would convert common-mode noise to differential noise, degrading the CAN bus signal-to-noise ratio; the 11pF typical capacitance per diode is low enough to not significantly load the CAN bus at the 1Mbps maximum CAN data rate.

Pin Description: PESD1CAN Pin Definition and Functions
Pin Name Function
1 CANH CAN High line (cathode of diode 1)
2 CANL CAN Low line (cathode of diode 2)
3 GND Common ground (anode of both diodes)
Application Scenarios: In which products and applications is PESD1CAN used
  • Automotive CAN node: protect CANH/CANL lines of TJA1042T transceiver from ESD during connector handling and field operation
  • Industrial CAN bus: protect CAN bus lines in factory automation from ESD caused by long cable runs near machinery
  • OBD-II diagnostic port: protect the CAN bus pins on the vehicle diagnostic connector from ESD during tool connection
Alternative Models: What chips are recommended as replacements for PESD1CAN
Manufacturer Part Number Package Notes
Nexperia PESD1CAN-U SOT-323 Smaller SC-70 package, lower capacitance
Nexperia PESD2CAN SOT-23 Different pinout for dual CAN protection
TI TPD4E05U06DQAR WCSP Quad channel ESD for CAN + other lines
onsemi NUP2105LT1G SOT-23 CAN bus TVS, 24V standoff, similar function

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1