Opens in a new tab

PIC16F18877-I

High-end 40/44-pin 8-bit MCU, 128KB Flash, 12-bit ADC (33-ch), LCD controller, 4x UART+2x SPI+2x I2C

1800

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F18877-I

Package:

PDIP-40 / TQFP-44 (10 x 10 x 1.0 mm) / UQFN-40

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16F18877-I is a high-performance 40/44-pin 8-bit Flash microcontroller from Microchip’s PIC16F188xx series, featuring the next-generation enhanced mid-range core with advanced analog peripherals, multiple serial communication ports, and extensive I/O capability. With 128 KB of Flash program memory, 4 KB of RAM, 1024 bytes of EEPROM, a 12-bit ADC with up to 33 channels, 5-bit DAC, op-amps, and an LCD driver, this device represents the pinnacle of 8-bit PIC integration for complex embedded applications. The industrial temperature variant operates from -40°C to +85°C.

Key Specifications

Core Architecture PIC RISC (enhanced mid-range, 14-bit)
Flash Program Memory 128 KB (65536 words)
RAM (Data Memory) 4096 bytes (4 KB)
EEPROM 1024 bytes (1 KB)
ADC Resolution 12-bit, up to 33 channels
DAC 5-bit buffered
Operational Amplifiers 2 (with PGA modes)
Comparators 3 high-speed
LCD Controller Up to 48 segments (24 common x 96 segment)
Internal Oscillator 32 MHz HF + 31 kHz LF
Supply Voltage 2.3V to 5.5V
I/O Pins Up to 36
Serial Ports 4x UART + 2x SPI + 2x I²C
PWM Channels 6 PWM + 2 ECCP
Operating Temperature -40°C to +85°C (Industrial)
Package Type PDIP-40 / TQFP-44 / UQFN-40

Features

  • 128 KB Flash + 4 KB RAM + 1 KB EEPROM
  • 12-bit ADC with 33 channels + 2 op-amps
  • LCD controller (up to 48 segments)
  • 4 UARTs + 2 SPIs + 2 I²Cs (rich serial)
  • 6 PWM + 2 ECCP channels
  • 3 comparators + 5-bit DAC

Applications

  • Industrial control panels with LCD
  • Home appliance controllers
  • Smart meter and energy management
  • Building automation systems
  • Medical devices with display
  • Motor control systems
  • IoT gateway devices
Product Introduction: PIC16F18877-I Product Introduction

The PIC16F18877-I is a flagship 40/44-pin 8-bit Flash microcontroller from Microchip’s PIC16F188xx family, offering the highest level of integration and memory capacity in the enhanced mid-range PIC16 lineup. With an impressive 128 KB of Flash program memory, 4 KB of RAM, and 1 KB of EEPROM, this device provides abundant resources for complex application firmware including sophisticated control algorithms, communication protocol stacks, graphical LCD driving, and data logging. The analog subsystem features a 12-bit ADC with up to 33 analog input channels—an extraordinary number for an 8-bit MCU—plus two operational amplifiers with programmable gain, three high-speed comparators, and a 5-bit DAC, enabling comprehensive analog signal processing without external components. The integrated LCD controller can drive up to 48-segment LCD displays (up to 24 commons and 96 segments depending on configuration), eliminating the need for external LCD driver ICs in display-equipped products. The exceptionally rich serial communication portfolio includes four UARTs, two SPI ports, and two I²C ports, enabling multi-protocol connectivity for gateway and data concentrator applications. With 36 general-purpose I/O pins, six PWM channels, multiple timer/counters, and an industrial temperature rating, the PIC16F18877 is the ultimate 8-bit PIC solution for complex, feature-rich embedded control designs.

Working Principle: PIC16F18877-I Working Principle

The PIC16F18877-I is built on Microchip’s enhanced mid-range PIC architecture with a 14-bit instruction set and a 16-level deep hardware stack. At 32 MHz system clock (from the high-frequency internal oscillator), the device delivers 8 MIPS of processing performance. The 128 KB Flash program memory is organized as 65536 14-bit words, accessible through a program counter with paging registers. The memory partition feature (Memory Access Partition – MAP) allows the Flash to be divided into boot block and application areas for secure field upgrades via bootloader. The 12-bit ADC with 33 channels features a successive approximation architecture with automated acquisition control, hardware averaging, and multiple trigger sources for flexible, low-overhead sampling. The two integrated op-amps support PGA gain settings up to 16x for sensor signal conditioning. The LCD controller module generates the multiplexed waveforms for driving static or multiplexed LCD displays, with programmable bias levels and frame rates. The four EUSART modules each support full-duplex UART communication with features like auto-baud detection, LIN support, and wake-on-break. The two MSSP modules provide SPI and I²C serial interface functionality. The six PWM modules and two ECCP (Enhanced CCP) modules support a wide range of waveform generation including complementary PWM with dead-band control for motor drive and power supply applications. Multiple low-power modes (Sleep, Doze, Idle) enable power management for energy-sensitive applications.

Pin Description: PIC16F18877-I Pin Definition and Functions
Port Count Type Key Peripheral Functions
PORTA (RA0-RA7) 8 I/O ADC CH0-CH7, OPA1/OPA2, DAC, OSC, MCLR, LCD
PORTB (RB0-RB7) 8 I/O ADC CH8-CH15, IOC interrupts, SSP1, UART1, CCP, LCD
PORTC (RC0-RC7) 8 I/O ADC CH16-CH22, UART2, SSP2, ECCP, comparators, LCD
PORTD (RD0-RD7) 8 I/O ADC CH23-CH28, parallel port, UART3/4, LCD segments
PORTE (RE0-RE3) 4 I/O ADC CH29-CH32, parallel control, LCD commons
VDD/VSS 2+ Power Power supply and ground (multiple pins)
Application Scenarios: In which products and applications is PIC16F18877-I used
  • Industrial control and HMI panels with segment LCD displays
  • Smart home appliance main controllers with display and touch
  • Smart electricity/water/gas meter data concentrators
  • Building automation controllers with multiple communication ports
  • Medical patient monitors with LCD display and sensor I/O
  • Multi-channel motor and actuator control systems
Alternative Models: What chips are recommended as replacements for PIC16F18877-I
Manufacturer Part Number Package Notes
Microchip PIC16F19197 TQFP-44 56KB Flash, LCD + ADC + op-amps, low power
STMicro STM8L152C6 LQFP-48 STM8, 32KB Flash, LCD, 12-bit ADC, low power
Silicon Labs EFM8UB3 QFN-32 8051, 40MHz, 16KB Flash, USB, 12-bit ADC
TI MSP430FR6972 LQFP-48 FRAM, 16-bit, 128KB FRAM, LCD, ultra low power

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1