Product Overview
The PIC16F688-I is a 14-pin, 8-bit Flash-based CMOS microcontroller from Microchip Technology featuring an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) and 8-channel 10-bit ADC. Based on the Mid-Range PIC architecture with 35 instructions and an 8-level deep hardware stack, it offers 7KB (4K x 14 words) of Flash program memory, 256 bytes of RAM, and 256 bytes of data EEPROM. Operating at up to 20 MHz with a 200 ns instruction cycle, this compact MCU integrates a precision 8 MHz internal oscillator factory calibrated to ±1%, two analog comparators, and nanoWatt Technology for low-power operation. With its EUSART supporting RS-232, RS-485, and LIN protocols, plus 10-bit ADC in a small 14-pin package, the PIC16F688 is ideal for sensor interfaces with serial output, LIN bus nodes, battery-powered monitoring devices, and space-constrained applications requiring both analog sensing and serial communication.
Key Specifications
| Core Architecture | 8-bit PIC (Mid-Range Core) |
| Program Memory | 7KB Flash (4K x 14 words) |
| RAM | 256 bytes |
| Data EEPROM | 256 bytes |
| Maximum Speed | 20 MHz (5 MIPS) |
| Operating Voltage | 2.0V to 5.5V |
| I/O Pins | 12 |
| ADC | 10-bit, 8 channels |
| Comparators | 2 |
| Timers | 1 x 8-bit (TMR0) + 1 x 16-bit (TMR1) |
| PWM | None (CCP not available on this variant) |
| Communication | EUSART (UART/RS-232/RS-485/LIN) |
| Internal Oscillator | 8 MHz (±1% factory calibrated) |
| Stack Levels | 8 |
| Operating Temperature | -40°C to +85°C (Industrial) |
| Package | 14-pin PDIP / SOIC / TSSOP / QFN / DFN |
Features
- Mid-Range PIC architecture with 35 single-cycle instructions and 8-level stack
- Enhanced USART (EUSART) with auto-baud detect, supporting RS-232/RS-485/LIN 2.0
- 8-channel 10-bit Analog-to-Digital Converter (ADC)
- Precision internal oscillator: 8 MHz factory calibrated to ±1%
- Software selectable frequency range: 8 MHz to 32 kHz
- Two analog comparators with programmable on-chip voltage reference (CVREF)
- 256 bytes of data EEPROM for non-volatile parameter storage
- nanoWatt Technology for ultra-low power consumption
- Ultra Low-Power Wake-up (ULPW) on pin change
- Timer0: 8-bit timer/counter with 8-bit programmable prescaler
- Timer1: 16-bit timer/counter with prescaler and gate control
- Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
- Enhanced Watchdog Timer (WDT) with on-chip RC oscillator
- In-Circuit Serial Programming (ICSP) via two pins
- Programmable code protection for program and data memory
- High current I/O pins: 25 mA sink/source per pin
- Automotive AEC-Q100 qualified
- LIN bus automotive sensor nodes
- Serial sensor interfaces and smart transducers
- Battery-powered monitoring and data logging
- Industrial control with RS-485 communication
- Space-constrained consumer electronics
- Home automation sensor nodes
- Medical devices with serial connectivity
- Automotive LIN bus sensor nodes and actuators
- Smart serial sensors with analog input and UART output
- Battery-powered data loggers with serial connectivity
- Industrial RS-485 sensor networks
- Space-constrained consumer electronics
- Home automation and IoT sensor endpoints
- Portable medical devices with serial data output
Applications
Product Introduction: PIC16F688-I Product Introduction
The PIC16F688 is a 14-pin Flash-based 8-bit CMOS microcontroller from Microchip Technology featuring an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) and 8-channel 10-bit ADC. Part of the popular PIC16F6xx family, this device offers 7KB (4K x 14 words) of Flash program memory, 256 bytes of RAM, and 256 bytes of data EEPROM. It operates at up to 20 MHz with a 200 ns instruction cycle, delivering 5 MIPS of processing power. The EUSART peripheral supports standard UART communication (RS-232/RS-485) as well as LIN 2.0 protocol with auto-baud detection, making it ideal for automotive and industrial networking applications. The 8-channel 10-bit ADC provides multi-channel analog sensing capability, while two analog comparators with programmable voltage reference add threshold detection functionality. A precision internal oscillator operates at 8 MHz (factory calibrated to ±1%) with software-selectable division ratios down to 32 kHz, eliminating the need for external crystals in most applications. With nanoWatt Technology providing multiple low-power modes including Ultra Low-Power Wake-up (ULPW), the PIC16F688 is well-suited for battery-powered sensor applications. Automotive AEC-Q100 qualification ensures reliability in harsh environments. Available in PDIP, SOIC, TSSOP, QFN, and DFN packages with industrial temperature range (-40°C to +85°C).
Working Principle: PIC16F688-I Working Principle
The PIC16F688 operates on a Mid-Range PIC RISC core with Harvard architecture, providing separate 14-bit program and 8-bit data memory buses for concurrent access. Most of the 35 instructions execute in a single clock cycle, with an 8-level deep hardware stack for subroutine calls. The Enhanced USART (EUSART) module handles asynchronous serial communication with hardware support for standard UART framing, automatic baud rate detection, and LIN bus compatibility. It includes a dedicated 8-bit baud rate generator with 16-bit fractional baud rate capability for high accuracy at various speeds. The 10-bit ADC uses successive approximation register (SAR) architecture to convert analog inputs from 8 channels, with programmable acquisition time and voltage reference options. Two analog comparators with a Comparator Voltage Reference (CVREF) module provide threshold detection and window comparison capabilities. The internal oscillator module generates a factory-calibrated 8 MHz clock with software-selectable post-scaler division ratios (8 MHz down to 32 kHz), plus software tuning capability for fine adjustment. Timer0 is an 8-bit timer/counter with 8-bit prescaler, while Timer1 is a 16-bit timer/counter with prescaler, gate control, and optional low-power 32 kHz oscillator operation. Power management features include Sleep mode, Idle mode, Brown-out Reset, and Watchdog Timer for reliable low-power operation. The 256 bytes of EEPROM provide non-volatile data storage with high endurance for storing configuration parameters and calibration data.
Pin Description: PIC16F688-I Pin Definition and Functions
| Pin (PDIP-14/SOIC-14) | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | P | Positive Supply Voltage |
| 2 | RA5/T1CKI/OSC1/CLKIN | I/O | Port A I/O / Timer1 Clock / Oscillator Input / Clock In |
| 3 | RA4/T1G/OSC2/CLKOUT | I/O | Port A I/O / Timer1 Gate / Oscillator Output / Clock Out |
| 4 | RA3/MCLR/VPP | I/P | Port A Input / Master Clear / Programming Voltage |
| 5 | RC5/TX/CK | I/O | Port C I/O / EUSART Transmit / Clock |
| 6 | RC4/C2OUT/SRQ/RX/DT | I/O | Port C I/O / C2 Output / SR Latch Out / EUSART Receive |
| 7 | RC3/C12IN3-/AN7 | I/O | Port C I/O / Comparator Neg Input 3 / ADC Ch7 |
| 8 | RC2/C12IN2-/AN6 | I/O | Port C I/O / Comparator Neg Input 2 / ADC Ch6 |
| 9 | RC1/C12IN1-/AN5 | I/O | Port C I/O / Comparator Neg Input 1 / ADC Ch5 |
| 10 | RC0/C2IN+/C1IN+/AN4 | I/O | Port C I/O / Comparator Pos Input / ADC Ch4 |
| 11 | VSS | P | Ground Reference |
| 12 | RA0/C1IN+/AN0/ULPWU | I/O | Port A I/O / C1+ / ADC Ch0 / ULP Wake-up |
| 13 | RA1/C2IN+/AN1 | I/O | Port A I/O / C2+ / ADC Channel 1 |
| 14 | RA2/T0CKI/INT/C1OUT/AN2 | I/O | Port A I/O / T0CKI / Ext Int / C1 Out / ADC Ch2 |
Application Scenarios: In which products and applications is PIC16F688-I used
Alternative Models: What chips are recommended as replacements for PIC16F688-I
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Microchip | PIC16F690-I | 20-pin | 20-pin, 12-ch ADC, SPI/I2C, ECCP |
| Microchip | PIC16F684-I | 14-pin | 14-pin, 10-bit ADC, CCP, no EUSART |
| Microchip | PIC12F683-I | 8-pin | 8-pin, 3.5KB Flash, 4-ch ADC |
| Microchip | PIC16F677-I | 20-pin | 3.5KB Flash, SPI/I2C, 12-ch ADC |
| Microchip | PIC16F1824-I | 14-pin | Newer gen, 7KB Flash, enhanced peripherals |
Recommend Parts

ISO1176TDWR
Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16
Brand: TI
Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)
IN STOCK: 6874pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4020PBF
200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 14149pcs
Cargo cycle: 3-7 Days
The minimum order is 1

NRF52832-QFAA-T
Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48
Brand: Nordic Semiconductor
Package: See datasheet
IN STOCK: 10958pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







