Opens in a new tab

PIC16F690-I

8-bit PIC MCU, 7KB Flash, 256B RAM, 256B EEPROM, 12-ch 10-bit ADC, ECCP+, EUSART/LIN, SPI/I2C, nanoWatt

8764

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F690-I

Package:

20-pin PDIP / SOIC / SSOP / QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16F690-I is a 20-pin, 8-bit Flash-based CMOS microcontroller from Microchip Technology, representing the highest-specification member of the PIC16F631/677/685/687/689/690 family. Based on the Mid-Range PIC architecture with 35 instructions and an 8-level deep hardware stack, it offers 7KB (4K x 14 words) of Flash program memory, 256 bytes of RAM, and 256 bytes of data EEPROM. Operating at up to 20 MHz with a 200 ns instruction cycle, this feature-rich MCU integrates a 12-channel 10-bit ADC, Enhanced Capture/Compare/PWM (ECCP+) module with PWM steering, EUSART with LIN support, MSSP (SPI/I2C), two analog comparators, and nanoWatt Technology. With its comprehensive peripheral set in a compact 20-pin package, the PIC16F690 is ideal for industrial control, motor control, sensor interfaces, automotive LIN nodes, and consumer applications requiring maximum functionality in minimal board space.

Key Specifications

Core Architecture 8-bit PIC (Mid-Range Core)
Program Memory 7KB Flash (4K x 14 words)
RAM 256 bytes
Data EEPROM 256 bytes
Maximum Speed 20 MHz (5 MIPS)
Operating Voltage 2.0V to 5.5V
I/O Pins 18
ADC 10-bit, 12 channels
Comparators 2
Timers 2 x 8-bit (TMR0/TMR2) + 1 x 16-bit (TMR1)
PWM ECCP+ (Enhanced CCP) with PWM steering, 10-bit
Communication EUSART (UART/LIN), SPI, I2C (MSSP)
Internal Oscillator 8 MHz (±1% factory calibrated)
Stack Levels 8
Operating Temperature -40°C to +85°C (Industrial)
Package 20-pin PDIP / SOIC / SSOP / QFN

Features

  • Mid-Range PIC architecture with 35 single-cycle instructions and 8-level stack
  • Enhanced CCP (ECCP+) module with PWM steering, dead-band delay, auto-shutdown, auto-restart
  • 12-channel 10-bit Analog-to-Digital Converter (ADC)
  • Enhanced USART (EUSART) with auto-baud detect, RS-232/RS-485/LIN 2.0 compatible
  • Master Synchronous Serial Port (MSSP) with SPI and I2C
  • Precision internal oscillator: 8 MHz factory calibrated to ±1%
  • Software selectable frequency range: 8 MHz to 32 kHz
  • Two analog comparators with programmable on-chip voltage reference (CVREF)
  • SR Latch mode for comparator outputs (555 timer emulation)
  • 256 bytes of data EEPROM for non-volatile storage
  • nanoWatt Technology for ultra-low power consumption
  • Ultra Low-Power Wake-up (ULPW) on pin change
  • Three timers: TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit)
  • Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
  • Brown-out Reset (BOR) with software selectable trip points
  • Enhanced Watchdog Timer (WDT) with on-chip RC oscillator
  • In-Circuit Serial Programming (ICSP) via two pins
  • Programmable code protection for program and data memory
  • Automotive AEC-Q100 qualified

Applications

  • Industrial control and sensor data acquisition
  • Motor control and power supply applications (ECCP PWM)
  • Automotive LIN bus sensor and actuator nodes
  • Battery-powered data loggers and monitoring systems
  • Smart sensor modules with multiple communication options
  • Consumer electronics with advanced control requirements
  • Home automation and IoT gateway endpoints
Product Introduction: PIC16F690-I Product Introduction

The PIC16F690 is the highest-feature member of the PIC16F6xx 20-pin family from Microchip Technology, offering a comprehensive set of analog and digital peripherals in a compact package. This 8-bit Flash-based CMOS microcontroller features the Mid-Range PIC architecture with 35 instructions and an 8-level deep hardware stack. It provides 7KB (4K x 14 words) of Flash program memory, 256 bytes of RAM, and 256 bytes of data EEPROM, operating at up to 20 MHz (5 MIPS). Key peripherals include a 12-channel 10-bit ADC for multi-channel analog sensing, an Enhanced CCP (ECCP+) module with PWM steering and dead-band control for motor control and power applications, an EUSART supporting RS-232/RS-485/LIN 2.0 for serial communication, and an MSSP module for SPI/I2C connectivity. Two analog comparators with programmable voltage reference and SR Latch mode add further analog capability. A precision 8 MHz internal oscillator (factory calibrated to ±1%) with software-selectable division ratios eliminates external crystals in most designs. The nanoWatt Technology provides multiple power-saving modes including Ultra Low-Power Wake-up (ULPW) for battery-powered applications. Automotive AEC-Q100 qualification ensures reliability in harsh environments. Available in PDIP, SOIC, SSOP, and QFN packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC16F690-I Working Principle

The PIC16F690 operates on a Mid-Range PIC RISC core with Harvard architecture, featuring separate 14-bit program memory and 8-bit data memory buses for concurrent access. Most of the 35 instructions execute in a single clock cycle, with an 8-level deep hardware stack supporting subroutine nesting. The Enhanced Capture/Compare/PWM (ECCP+) module provides advanced PWM capabilities including up to 4 PWM outputs with steering, programmable dead-band delay, auto-shutdown, and auto-restart features, making it suitable for motor control, switching power supplies, and lighting applications. The 10-bit ADC uses successive approximation register (SAR) architecture with 12 input channels, programmable acquisition time, and selectable voltage references. The EUSART module handles asynchronous serial communication with auto-baud detection and LIN bus support, while the MSSP module provides SPI and I2C communication with hardware protocol handling. The internal oscillator generates a factory-calibrated 8 MHz clock with software-selectable post-scaler division ratios (8 MHz down to 32 kHz) and software tuning capability. Three timer modules provide flexible timing and counting: Timer0 (8-bit with prescaler), Timer1 (16-bit with gate control and low-power oscillator option), and Timer2 (8-bit with period register, prescaler, and postscaler). Two analog comparators with Comparator Voltage Reference (CVREF) provide threshold detection and window comparison, with SR Latch mode for 555 timer-like operation. Power management includes Sleep mode, Idle mode, Brown-out Reset, and Watchdog Timer for reliable low-power operation.

Pin Description: PIC16F690-I Pin Definition and Functions
Pin (PDIP-20/SOIC-20) Name Type Function
1 VDD P Positive Supply Voltage
2 RA5/T1CKI/OSC1/CLKIN I/O Port A I/O / Timer1 Clock / Oscillator / Clock In
3 RA4/T1G/OSC2/CLKOUT I/O Port A I/O / Timer1 Gate / Oscillator Out / Clock Out
4 RA3/MCLR/VPP I/P Port A Input / Master Clear / Programming Voltage
5 RC5/SDO/TX/CK I/O Port C I/O / SPI Data Out / EUSART TX/CK
6 RC4/SDI/SDA/C2OUT/SRQ/RX/DT I/O Port C I/O / SPI In / I2C Data / C2 Out / EUSART RX
7 RC3/SCK/SCL/C12IN3-/AN7 I/O Port C I/O / SPI Clock / I2C Clock / C Neg3 / ADC7
8 RC6/AN8 I/O Port C I/O / ADC Channel 8
9 RC7/AN9 I/O Port C I/O / ADC Channel 9
10 RB7/ICSPDAT/AN11 I/O Port B I/O / ICSP Data / ADC Channel 11
11 RB6/ICSPCLK/AN10 I/O Port B I/O / ICSP Clock / ADC Channel 10
12 RB5/AN5 I/O Port B I/O / ADC Channel 5
13 RB4/AN4 I/O Port B I/O / ADC Channel 4
14 RC2/C12IN2-/AN6/CCP1/P1A I/O Port C I/O / C Neg2 / ADC6 / CCP1 / PWM1A
15 RC1/C12IN1-/AN5/P1B I/O Port C I/O / C Neg1 / ADC5 / PWM1B
16 RC0/C2IN+/C1IN+/AN4/P1C I/O Port C I/O / C Pos / ADC4 / PWM1C
17 VSS P Ground Reference
18 RA0/C1IN+/AN0/ULPWU/P1D I/O Port A I/O / C1+ / ADC0 / ULPWU / PWM1D
19 RA1/C2IN+/AN1 I/O Port A I/O / C2+ / ADC Channel 1
20 RA2/T0CKI/INT/C1OUT/AN2 I/O Port A I/O / T0CKI / Ext Int / C1 Out / ADC2
Application Scenarios: In which products and applications is PIC16F690-I used
  • Industrial motor control and power converter applications
  • Automotive LIN bus sensor and actuator nodes
  • Multi-channel sensor data acquisition systems
  • Battery-powered data loggers with advanced features
  • Smart sensor modules with multiple communication interfaces
  • Consumer electronics with motor and display control
  • Home automation and smart device controllers
Alternative Models: What chips are recommended as replacements for PIC16F690-I
Manufacturer Part Number Package Notes
Microchip PIC16F685-I 20-pin 7KB Flash, ECCP, no EUSART
Microchip PIC16F689-I 20-pin 7KB Flash, EUSART+SPI/I2C, no ECCP
Microchip PIC16F677-I 20-pin 3.5KB Flash, ADC+SPI/I2C, lower cost
Microchip PIC16F688-I 14-pin 14-pin, 8-ch ADC, EUSART
Microchip PIC16F1788-I 20-pin Newer gen, 16KB Flash, enhanced analog

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1