Opens in a new tab

PIC16F886-I/SP

8-bit PIC16F MCU, 14KB Flash, 368B RAM, 24 I/O, 11ch 10-bit ADC, EUSART, MSSP, SPDIP-28

3480

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F886-I/SP

Package:

28-SPDIP (34.67 x 7.24 x 3.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16F886-I/SP from Microchip Technology is an 8-bit PIC16F mid-range microcontroller in a 28-pin SPDIP package. It features 14KB Flash, 368B RAM, 256B EEPROM, 24 I/O pins, 11-channel 10-bit ADC, two comparators, CCP and ECCP modules, EUSART, MSSP (SPI/I2C), and operates from 2V to 5.5V at up to 20MHz.

Key Specifications

Core PIC16 (Mid-Range)
Max Frequency 20MHz (5 MIPS)
Program Memory 14KB (8K x 14) Flash
Data RAM 368 bytes
Data EEPROM 256 bytes
I/O Pins 24
ADC 11-channel 10-bit
Comparators 2
Timers 2 x 8-bit, 1 x 16-bit
CCP Modules 1 CCP + 1 ECCP (auto-shutdown, PWM steering)
Serial Interfaces EUSART, MSSP (SPI/I2C)
Internal Oscillator 8MHz, ±1% factory calibrated, selectable 8MHz to 31kHz
Supply Voltage 2V to 5.5V
Package 28-SPDIP (34.67 x 7.24mm)
Operating Temperature -40°C to +85°C

Features

  • 35 single-word instructions, 8-level hardware stack
  • 14KB Flash with 100K erase/write cycles
  • 256B EEPROM with 1M erase/write cycles, >40-year retention
  • Precision internal oscillator: ±1% factory calibrated, software selectable 8MHz to 31kHz
  • Two-Speed Start-Up and Fail-Safe Clock Monitor
  • Enhanced CCP with auto-shutdown and PWM steering
  • MSSP with SPI and I2C (with address mask)
  • EUSART with RS-485, RS-232, LIN, auto-baud detect, auto-wake-up
  • Ultra Low-Power Wake-up (ULPWU)
  • In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD)
  • Power-on Reset, selectable Brown-out Reset, extended WDT

Applications

  • Industrial control and automation
  • Automotive body electronics
  • Appliance motor control
  • Consumer audio and video
  • Power supply monitoring and management
Product Introduction: PIC16F886-I/SP Product Introduction

The PIC16F886-I/SP from Microchip Technology is a powerful yet easy-to-program 8-bit CMOS Flash microcontroller based on the PIC16 mid-range core with 35 single-word instructions and an 8-level hardware stack. It integrates 14KB Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM. The device features 24 I/O pins, an 11-channel 10-bit ADC, two comparators, one CCP module, one Enhanced CCP module with auto-shutdown and PWM steering, an EUSART supporting RS-485/RS-232/LIN, and an MSSP supporting both SPI and I2C with address mask capability. A precision internal oscillator is factory calibrated to ±1% accuracy.

Working Principle: PIC16F886-I/SP Working Principle

The PIC16F886 uses Microchip’s mid-range 8-bit PIC core with a 2-stage pipeline executing most instructions in a single cycle (200ns at 20MHz). The 14KB Flash stores up to 8192 x 14-bit instructions, while 368 bytes of SRAM and 256 bytes of EEPROM provide data storage. The internal oscillator can be software-configured from 8MHz down to 31kHz for power optimization. The Enhanced CCP module supports capture, compare, and up to 4 PWM outputs with auto-shutdown capability and PWM steering for motor control. The MSSP module operates as either a 3-wire SPI master/slave or an I2C master/slave with 7-bit and 10-bit addressing. The EUSART supports full-duplex asynchronous communication with auto-baud detection and auto-wake-up on start bit reception.

Pin Description: PIC16F886-I/SP Pin Definition and Functions
Pin Name Type Function
1 MCLR/VPP Input Master Clear (reset) / Programming voltage
2 RA0/AN0 I/O Port A bit 0 / ADC channel 0
3 RA1/AN1 I/O Port A bit 1 / ADC channel 1
4 RA2/AN2/VREF I/O Port A bit 2 / ADC channel 2 / Voltage reference
5-7 RA3-RA5 I/O Port A / ADC / Comparator / ICSP
8-14 RB0-RB7 I/O Port B / Interrupt / ICSP / ULPWU
15-22 RC0-RC7 I/O Port C / T1OSO / CCP / ECCP / MSSP / EUSART
23 VSS Power Ground
24 VDD Power Positive supply (2V to 5.5V)
25-28 RB4-RB7 I/O Port B / Interrupt-on-change / ICSP
Application Scenarios: In which products and applications is PIC16F886-I/SP used
  • Industrial motor control using ECCP PWM with auto-shutdown
  • Multi-channel sensor acquisition via 11-channel 10-bit ADC
  • RS-485 half-duplex communication with auto-baud detect
  • I2C bus sensor interface with address mask for multi-node networks
  • Battery-powered devices with ULPWU and internal oscillator switching
Alternative Models: What chips are recommended as replacements for PIC16F886-I/SP
Manufacturer Part Number Package Notes
Microchip PIC16F887-I/PT TQFP-44 35 I/O, 14ch ADC, SMD version
Microchip PIC16F886-I/SS SSOP-28 Same specs, SSOP SMD package
Microchip PIC16F18855-I/SP SPDIP-28 Enhanced mid-range, lower power
TI MSP430G2553IPW20 TSSOP-20 16-bit ultra-low-power alternative
ST STM8S003F3P6 TSSOP-20 8-bit, 8KB Flash, low cost

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1