Opens in a new tab

PIC16LF1789-I

8-bit XLP PIC MCU, 28KB Flash, 2KB RAM, 256B EEPROM, 15-ch 12-bit ADC, 2 op-amps, 2 DAC, 3 comparators, 7 PWM, EUSART, 2 SPI/I2C, NCO, 1.8-3.6V low-voltage, 44-pin

3241

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16LF1789-I

Package:

44-pin TQFP / QFN / UQFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16LF1789-I is a 44-pin, 8-bit Flash-based CMOS microcontroller from Microchip Technology featuring the Enhanced Mid-Range core with advanced analog peripherals and eXtreme Low-Power (XLP) technology. With 49 instructions and a 16-level deep hardware stack, this low-voltage MCU offers 28KB (16K x 14 words) of Flash program memory, 2048 bytes of RAM, and 256 bytes of data EEPROM. Operating at up to 32 MHz across a low voltage range of 1.8V to 3.6V (LF variant), it integrates a 15-channel 12-bit ADC, two 8-bit DACs, two operational amplifiers, three comparators, three enhanced CCP modules, four CCP modules, two MSSP (SPI/I2C), one EUSART, and a Numerically Controlled Oscillator (NCO). With its industry-leading analog integration including op-amps and high-resolution ADC, the PIC16LF1789 is ideal for precision sensor interfaces, analog signal conditioning, battery-powered measurement devices, industrial control, and medical applications requiring high-performance analog in a low-power design.

Key Specifications

Core Architecture 8-bit PIC (Enhanced Mid-Range Core)
Program Memory 28KB Flash (16K x 14 words)
RAM 2048 bytes (2 KB)
Data EEPROM 256 bytes
Maximum Speed 32 MHz (8 MIPS)
Operating Voltage 1.8V to 3.6V (LF variant, low-voltage XLP)
I/O Pins 36
ADC 12-bit, 15 channels with voltage reference
DAC 2 x 8-bit Digital-to-Analog Converters
Op-Amps 2 operational amplifiers
Comparators 3
Timers 4 x 8-bit + 2 x 16-bit
PWM 3 x ECCP + 4 x CCP = 7 total PWM modules
Communication EUSART, 2 x SPI, 2 x I2C (dual MSSP)
NCO Numerically Controlled Oscillator
Low Power XLP Technology (nanoWatt XLP)
Internal Oscillator 16 MHz HF, 32 kHz LF
Stack Levels 16
Debug Built-in In-Circuit Debug (ICD)
Operating Temperature -40°C to +85°C (Industrial)
Package 44-pin TQFP / QFN / UQFN

Features

  • Enhanced Mid-Range core with 49 instructions and 16-level hardware stack
  • eXtreme Low-Power (XLP) technology with nanoWatt XLP
  • Low-voltage operation: 1.8V to 3.6V (LF variant)
  • High-resolution 15-channel 12-bit ADC with programmable voltage reference
  • Two 8-bit Digital-to-Analog Converters (DAC)
  • Two operational amplifiers (op-amps) with programmable gain
  • Three analog comparators with selectable voltage references
  • Three Enhanced CCP (ECCP) modules with PWM steering and dead-band control
  • Four standard CCP modules for additional capture/compare/PWM
  • Dual MSSP modules: 2x SPI + 2x I2C
  • Enhanced USART (EUSART) with auto-baud detect
  • Numerically Controlled Oscillator (NCO) for precision frequency generation
  • Integrated temperature indicator module
  • Zero Cross Detection (ZCD) module
  • Data Signal Modulator (DSM) module
  • Internal 16 MHz high-frequency + 32 kHz low-frequency oscillators
  • Six timer modules: 4 x 8-bit + 2 x 16-bit
  • 36 I/O pins with 25 mA source/sink capability
  • Programmable Brown-Out Reset (BOR)
  • Extended Watchdog Timer (WDT)
  • Enhanced Power-On/Off-Reset
  • In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD)
  • Flash self read/write capability
  • Recommended for Automotive Design

Applications

  • Precision analog sensor interfaces and signal conditioning
  • Portable medical devices and health monitoring
  • Battery-powered precision measurement instruments
  • Industrial analog sensor modules and transmitters
  • Power supply control and battery management
  • Motor control with current sensing (op-amps + ADC)
  • Automotive sensor signal conditioning
Product Introduction: PIC16LF1789-I Product Introduction

The PIC16LF1789 is a 44-pin Flash-based 8-bit CMOS microcontroller from Microchip Technology featuring the Enhanced Mid-Range core with industry-leading analog integration and eXtreme Low-Power (XLP) technology. The ‘LF’ designation indicates a low-voltage variant operating from 1.8V to 3.6V. With 28KB (16K x 14 words) of Flash program memory, 2KB of RAM, and 256 bytes of EEPROM, it delivers 8 MIPS at 32 MHz. Its standout feature is the advanced analog peripheral set: a 15-channel 12-bit ADC for high-resolution sensing, two 8-bit DACs for analog output, two operational amplifiers with programmable gain for signal conditioning without external components, and three analog comparators with selectable references. Digital peripherals include three Enhanced CCP (ECCP) modules with PWM steering, four standard CCP modules, dual MSSP (SPI/I2C) modules, an EUSART, and a Numerically Controlled Oscillator (NCO) for precise frequency generation. The integrated op-amps eliminate the need for external signal conditioning amplifiers in many sensor applications, reducing BOM cost and board space. XLP technology enables extremely low power consumption for battery-powered devices. Built-in ICD simplifies development. Recommended for Automotive Design. Available in TQFP-44, QFN-44, and UQFN-44 packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC16LF1789-I Working Principle

The PIC16LF1789 operates on the Enhanced Mid-Range PIC architecture with 49 instructions and a 16-level deep hardware stack, providing 8 MIPS throughput at 32 MHz. XLP (eXtreme Low-Power) technology enables extremely low current consumption in both active and sleep modes. The 12-bit ADC uses successive approximation register (SAR) architecture with 15 input channels and a selectable fixed voltage reference (FVR), enabling high-resolution precision measurements without external reference circuits. Two integrated operational amplifiers can be configured as programmable gain amplifiers (PGAs), voltage followers, or general-purpose op-amps, eliminating the need for external signal conditioning ICs in sensor applications. Two 8-bit DACs provide analog output capabilities for reference generation or control signals. Three analog comparators with programmable voltage references enable threshold detection and window comparison. The Numerically Controlled Oscillator (NCO) generates precise, linearly adjustable frequency outputs ideal for dimming, tone generation, or frequency synthesis applications. Three ECCP and four CCP modules provide seven PWM/capture/compare channels for motor control, LED dimming, and timing applications. Dual MSSP modules provide independent SPI and I2C interfaces, while the EUSART handles UART/LIN communication. Six timer modules support the peripherals. The integrated temperature indicator module enables temperature measurement without external sensors. Zero Cross Detection (ZCD) and Data Signal Modulator (DSM) add further signal processing capabilities. Power management includes multiple low-power modes, Brown-Out Reset, and Extended Watchdog Timer for reliable low-voltage operation.

Pin Description: PIC16LF1789-I Pin Definition and Functions
Pin (TQFP-44) Name Type Function
1 MCLR/VPP/RE3 I/P Master Clear / Programming Voltage / Port E I/O
2 RA0/AN0/C1IN+/DAC1OUT/OPA1IN+ I/O Port A I/O / ADC0 / C1+ / DAC1 Out / OPA1+
3 RA1/AN1/C2IN+/OPA2IN+/VREF+ I/O Port A I/O / ADC1 / C2+ / OPA2+ / Vref+
4 RA2/AN2/C3IN+/OPA1IN-/VREF- I/O Port A I/O / ADC2 / C3+ / OPA1- / Vref-
5 RA3/AN3/C1IN-/OPA2IN-/FVR3 I/O Port A I/O / ADC3 / C1- / OPA2- / FVR
6 RA4/T0CKI/C2OUT/SRQ/NCO1 I/O Port A I/O / T0CKI / C2 Out / SR Q / NCO
7 RA5/SS/AN4/C3OUT/OPA1OUT I/O Port A I/O / SPI SS / ADC4 / C3 Out / OPA1 Out
8 RE0/AN5/RD I/O Port E I/O / ADC5
9 RE1/AN6/WR I/O Port E I/O / ADC6
10 RE2/AN7/CS I/O Port E I/O / ADC7
11 VSS P Ground Reference
12 RD0/AN8 I/O Port D I/O / ADC Channel 8
13 RD1/AN9 I/O Port D I/O / ADC Channel 9
14 RD2/AN10 I/O Port D I/O / ADC Channel 10
15 RD3/AN11 I/O Port D I/O / ADC Channel 11
16 RC0/T1OSO/T1CKI/CCP3 I/O Port C I/O / T1OSO / T1CKI / CCP3
17 RC1/T1OSI/CCP2 I/O Port C I/O / T1OSI / CCP2
18 RC2/CCP1/P1A I/O Port C I/O / CCP1 / PWM1A
19 RC3/SCK1/SCL1 I/O Port C I/O / SPI1 Clock / I2C1 Clock
20 RD4/AN12 I/O Port D I/O / ADC Channel 12
21 RD5/AN13 I/O Port D I/O / ADC Channel 13
22 RD6/AN14 I/O Port D I/O / ADC Channel 14
23 RD7/AN15 I/O Port D I/O / ADC Channel 15
24 RC4/SDI1/SDA1 I/O Port C I/O / SPI1 Data In / I2C1 Data
25 RC5/SDO1 I/O Port C I/O / SPI1 Data Out
26 RC6/TX/CK I/O Port C I/O / EUSART TX/Clock
27 RC7/RX/DT I/O Port C I/O / EUSART RX/Data
28 VSS P Ground Reference
29 VDD P Positive Supply Voltage
30 RB0/INT/CCP4/P1B I/O Port B I/O / Ext Int / CCP4 / PWM1B
31 RB1/SDO2/CCP5/P1C I/O Port B I/O / SPI2 DO / CCP5 / PWM1C
32 RB2/SCK2/SCL2/CCP6/P1D I/O Port B I/O / SPI2 CK / I2C2 CK / CCP6 / PWM1D
33 RB3/SDI2/SDA2/CCP7/PGM I/O Port B I/O / SPI2 DI / I2C2 D / CCP7 / LVP
34 RB4/SS2/CCP8 I/O Port B I/O / SPI2 SS / CCP8
35 RB5/CCP9 I/O Port B I/O / CCP9
36 RB6/ICSPCLK/CCP10 I/O Port B I/O / ICSP Clock / CCP10
37 RB7/ICSPDAT I/O Port B I/O / ICSP Data
38 OSC1/CLKIN/RA7 I Oscillator Input / Clock Input / Port A I/O
39 OSC2/CLKOUT/RA6 O Oscillator Output / Clock Output / Port A I/O
40 RA0/AN0/C1IN+/DAC1OUT/OPA1IN+ I/O Alternate function (see pin 2)
41 RA1/AN1/C2IN+/OPA2IN+ I/O Alternate function (see pin 3)
42 RA2/AN2/C3IN+/OPA1IN- I/O Alternate function (see pin 4)
43 RA3/AN3/C1IN-/OPA2IN- I/O Alternate function (see pin 5)
44 VDD P Positive Supply Voltage
Application Scenarios: In which products and applications is PIC16LF1789-I used
  • Precision sensor interfaces with built-in op-amp conditioning
  • Portable medical devices and patient monitoring
  • Battery-powered precision measurement instruments
  • Industrial 4-20mA sensor transmitters
  • Smart battery management and fuel gauging
  • Motor control with current/voltage sensing
  • Automotive analog sensor signal conditioning
Alternative Models: What chips are recommended as replacements for PIC16LF1789-I
Manufacturer Part Number Package Notes
Microchip PIC16F1789-I 44-pin Standard voltage 2.3-5.5V, same features
Microchip PIC16LF1788-I 28-pin 28KB Flash, 2KB RAM, 20-ch ADC, smaller
Microchip PIC16LF1787-I 28-pin 14KB Flash, 1KB RAM, 2 op-amps
Microchip PIC16LF1527-I 64-pin 28KB Flash, 30-ch ADC, no op-amps, more I/O
Microchip PIC18F27K42-I 28-pin 16-bit core, 128KB Flash, more advanced

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1