Opens in a new tab

PIC18F4331-I

PIC18 motor control MCU, 8KB Flash, 768B RAM, 256B EEPROM, 9-ch 10-bit 200Ksps ADC, 8 PWM, QEI encoder interface, 3 capture, SPI/I2C, EUSART/LIN, 40-pin

5730

Effective Inventory

Image for reference only

Manufacturer Part:

PIC18F4331-I

Package:

40-pin PDIP / 44-pin TQFP / QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC18F4331-I is a 40/44-pin, 8-bit high-performance Flash microcontroller from Microchip Technology featuring the PIC18 architecture with advanced motion control peripherals. With 4096 single-word instructions and a 31-level deep hardware stack, this motor-control-optimized MCU offers 8KB (4K x 16) of Flash program memory, 768 bytes of RAM, and 256 bytes of data EEPROM. Operating at up to 40 MHz (10 MIPS), it integrates a 9-channel 10-bit 200 Ksps ADC, a Motion Feedback Module with Quadrature Encoder Interface (QEI), three capture inputs, eight Power Control PWM outputs, two analog comparators, an MSSP (SPI/I2C), an Enhanced Addressable USART with LIN support, and an 8 MHz internal oscillator with PLL. Designed specifically for advanced motor control and motion applications, the PIC18F4331 combines high-current PWM with encoder feedback capability, making it ideal for BLDC motors, servo systems, industrial drives, and automotive motor control applications requiring position feedback.

Key Specifications

Core Architecture 8-bit PIC18 RISC Architecture
Program Memory 8KB Flash (4K x 16 words)
RAM 768 bytes
Data EEPROM 256 bytes
Maximum Speed 40 MHz (10 MIPS)
Operating Voltage 4.2V to 5.5V
I/O Pins 36
ADC 10-bit, 9 channels, 200 Ksps
Comparators 2 analog comparators
Timers 4 timers (TMR0 8/16-bit, TMR1/3/5 16-bit)
PWM 8 PWM outputs (Power Control PWM module)
QEI Quadrature Encoder Interface (Motion Feedback Module)
Input Capture 3 input capture channels
Communication SPI, I2C (MSSP), EUSART/LIN
Internal Oscillator 8 MHz, 6 selectable frequencies
PLL 4x PLL (up to 32 MHz with internal osc)
Stack Levels 31-level hardware stack
Hardware Multiplier 8 x 8 single-cycle hardware multiplier
Low Power nanoWatt technology
Debug In-Circuit Debug (ICD)
Operating Temperature -40°C to +85°C (Industrial)
Package 40-pin PDIP / 44-pin TQFP / QFN

Features

  • High-performance PIC18 RISC CPU with 10 MIPS at 40 MHz
  • 16-bit wide instructions, 8-bit wide data path
  • 31-level deep software accessible hardware stack
  • 8 x 8 single-cycle hardware multiplier
  • Priority levels for interrupts
  • Power Control PWM Module: 8 PWM outputs
  • Half-bridge, full-bridge, push-pull, and single PWM modes
  • Programmable dead time and auto-shutdown on fault
  • Motion Feedback Module (MFM) with Quadrature Encoder Interface (QEI)
  • Three independent Input Capture channels with Timer5 time base
  • 9-channel 10-bit ADC with 200 Ksps conversion rate
  • Programmable acquisition time for reduced software overhead
  • Two analog comparators with programmable voltage reference
  • Master Synchronous Serial Port (MSSP): SPI and I2C
  • Enhanced Addressable USART with LIN/J2602 support
  • Auto-baud detect and auto-wake-up on Start bit
  • 16-bit Baud Rate Generator for high resolution
  • Internal 8 MHz oscillator with 6 selectable frequencies
  • 4x Phase Lock Loop (PLL)
  • Fail-Safe Clock Monitor and Two-Speed Oscillator Start-up
  • Timer0: 8/16-bit timer/counter with 8-bit prescaler
  • Timer1, Timer3, Timer5: 16-bit timer/counters with prescaler
  • Power-managed modes: Run, Idle, Sleep
  • Extended Watchdog Timer (WDT) with 16-bit prescaler
  • Brown-out Reset (BOR) and Power-on Reset (POR)
  • Self-programmable under software control
  • In-Circuit Serial Programming (ICSP) via two pins
  • In-Circuit Debug (ICD) support
  • Programmable code protection
  • 36 I/O pins with 25 mA sink/source capability

Applications

  • Brushless DC (BLDC) motor control with encoder feedback
  • Servo motor control and positioning systems
  • Industrial motor drives and inverters
  • Automotive motor control (fuel pumps, fans, actuators)
  • Robotics and motion control systems
  • Power conversion and inverter systems
  • Industrial automation with position feedback
Product Introduction: PIC18F4331-I Product Introduction

The PIC18F4331 is a 40/44-pin high-performance 8-bit Flash microcontroller from Microchip Technology featuring the PIC18 architecture with advanced motion control peripherals. It offers 8KB (4K x 16) of Flash program memory, 768 bytes of RAM, and 256 bytes of data EEPROM, operating at up to 40 MHz (10 MIPS). The key differentiator is the Motion Feedback Module (MFM) which integrates a Quadrature Encoder Interface (QEI) and three input capture channels, enabling direct interface with incremental rotary encoders for position and velocity measurement – essential for closed-loop motor control. Combined with the Power Control PWM module providing 8 PWM outputs with programmable dead time and fault auto-shutdown, the PIC18F4331 is a complete single-chip motor control solution. A 9-channel 10-bit ADC with 200 Ksps conversion speed handles current sensing and voltage monitoring. Two analog comparators provide over-current protection. Communication is handled by an MSSP module for SPI/I2C and an Enhanced Addressable USART with LIN/J2602 support for automotive connectivity. The internal 8 MHz oscillator with 4x PLL eliminates the need for an external crystal. With its QEI encoder interface, high-current PWM, and automotive-capable peripherals, the PIC18F4331 is ideal for BLDC motor control, servo systems, industrial drives, robotics, and automotive motor applications requiring position feedback. Available in PDIP-40, TQFP-44, and QFN-44 packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC18F4331-I Working Principle

The PIC18F4331 operates on the PIC18 RISC architecture with 16-bit wide instructions and an 8-bit wide data path, delivering 10 MIPS at 40 MHz. The 31-level deep hardware stack supports deeply nested subroutines and interrupts. The Motion Feedback Module (MFM) is the core feature, integrating a Quadrature Encoder Interface (QEI) that accepts two phase inputs (QEA, QEB) and one index input (INDX) from an incremental rotary encoder. The QEI provides position tracking, direction sensing, velocity measurement, and index pulse detection – all in hardware, reducing CPU overhead in closed-loop motor control systems. Three independent Input Capture channels, using Timer5 as the time base, provide precise time measurement of external events. The Power Control PWM (PCPWM) module provides 8 PWM outputs with multiple drive modes including half-bridge, full-bridge, and push-pull configurations, with programmable dead time and auto-shutdown on fault input for hardware-level circuit protection. The 10-bit ADC with 200 Ksps conversion rate and programmable acquisition time provides fast current sensing for motor control algorithms. Two analog comparators with programmable voltage reference enable fast over-current protection without CPU intervention. The Enhanced Addressable USART supports LIN/J2602 protocol with auto-baud detection, making it suitable for automotive LIN bus applications. The MSSP module handles SPI and I2C communication. Four timer modules (one 8/16-bit and three 16-bit) provide flexible timing resources. Power management includes Run, Idle, and Sleep modes for power optimization.

Pin Description: PIC18F4331-I Pin Definition and Functions
Pin (PDIP-40) Name Type Function
1 MCLR/VPP/RE3 I/P Master Clear / VPP / Port E I/O
2 RA0/AN0 I/O Port A I/O / ADC Channel 0
3 RA1/AN1 I/O Port A I/O / ADC Channel 1
4 RA2/AN2/VREF- I/O Port A I/O / ADC2 / Vref Negative
5 RA3/AN3/VREF+ I/O Port A I/O / ADC3 / Vref Positive
6 RA4/T0CKI I/O Port A I/O / Timer0 Clock Input
7 RA5/AN4/LVDIN I/O Port A I/O / ADC4 / LVD Input
8 RE0/AN6/RD I/O Port E I/O / ADC6
9 RE1/AN7/WR I/O Port E I/O / ADC7
10 RE2/AN8/CS I/O Port E I/O / ADC8
11 VSS P Ground Reference
12 RD0/PWM0 I/O Port D I/O / PWM Output 0
13 RD1/PWM1 I/O Port D I/O / PWM Output 1
14 RD2/PWM2 I/O Port D I/O / PWM Output 2
15 RD3/PWM3 I/O Port D I/O / PWM Output 3
16 RC0/T1OSO/T1CKI I/O Port C I/O / T1OSO / Timer1 Clock
17 RC1/T1OSI I/O Port C I/O / T1OSI
18 RC2/CCP1 I/O Port C I/O / CCP1
19 RC3/SCK/SCL I/O Port C I/O / SPI Clock / I2C Clock
20 RD4/FLTA I/O Port D I/O / PWM Fault Input A
21 RD5/PWM4 I/O Port D I/O / PWM Output 4
22 RD6/PWM6 I/O Port D I/O / PWM Output 6
23 RD7/PWM7 I/O Port D I/O / PWM Output 7
24 RC4/SDI/SDA I/O Port C I/O / SPI DI / I2C Data
25 RC5/SDO I/O Port C I/O / SPI Data Out
26 RC6/TX/CK I/O Port C I/O / EUSART TX/Clock
27 RC7/RX/DT I/O Port C I/O / EUSART RX/Data
28 VSS P Ground Reference
29 VDD P Positive Supply Voltage
30 RB0/INT0/PWM5 I/O Port B I/O / Ext Int0 / PWM5
31 RB1/AN5/C1IN+/QEA I/O Port B I/O / ADC5 / Comp1+ / QEI Phase A
32 RB2/C1OUT/C2OUT/QEB I/O Port B I/O / Comp Out / QEI Phase B
33 RB3/PGM/C2IN+/INDX I/O Port B I/O / LVP / Comp2+ / QEI Index
34 RB4/CAP1 I/O Port B I/O / Input Capture 1
35 RB5/CAP2 I/O Port B I/O / Input Capture 2
36 RB6/ICSPCLK/CAP3 I/O Port B I/O / ICSP Clock / Input Capture 3
37 RB7/ICSPDAT I/O Port B I/O / ICSP Data
38 OSC1/CLKIN I Oscillator Input / Clock Input
39 OSC2/CLKOUT O Oscillator Output / Clock Output
40 VDD P Positive Supply Voltage
Application Scenarios: In which products and applications is PIC18F4331-I used
  • BLDC motor control with encoder feedback (FOC/sensored)
  • Servo motor positioning and motion control systems
  • Industrial AC drives and frequency inverters
  • Automotive actuators with position feedback
  • Robotic joint control and motion platforms
  • Switch-mode power supplies with current mode control
  • Industrial conveyor and packaging machine control
Alternative Models: What chips are recommended as replacements for PIC18F4331-I
Manufacturer Part Number Package Notes
Microchip PIC18F4431-I 40-pin 16KB Flash, 768B RAM, same peripherals
Microchip PIC18F2431-I 28-pin 16KB Flash, 5-ch ADC, QEI, 28-pin package
Microchip PIC18F2331-I 28-pin 8KB Flash, 5-ch ADC, QEI, lower cost
Microchip PIC18LF4331-I 40-pin Low-voltage version, 2.0-5.5V
Microchip dsPIC33FJ32MC204-I 44-pin 16-bit DSC, DSP engine, advanced motor control

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1