Opens in a new tab

PIC18F44J10-I

PIC18 J-series MCU, 16KB Flash, 1KB RAM, no EEPROM, 13-ch 10-bit ADC, 2 CCP, dual SPI/I2C, EUSART/LIN, PSP, 5V tolerant, 40MHz, 44-pin

6840

Effective Inventory

Image for reference only

Manufacturer Part:

PIC18F44J10-I

Package:

44-pin TQFP / QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC18F44J10-I is a 44-pin, 8-bit high-performance RISC microcontroller from Microchip Technology featuring the PIC18 architecture in a cost-optimized J-series package. With 10 MIPS performance and a 31-level deep hardware stack, this general-purpose MCU offers 16KB (8K x 16) of Flash program memory, 1024 bytes of RAM, and no data EEPROM (J-series characteristic). Operating at up to 40 MHz across a voltage range of 2.0V to 3.6V with 5V-tolerant digital inputs, it integrates a 13-channel 10-bit ADC with self-calibration, two analog comparators, two CCP modules (one standard + one enhanced), dual MSSP (SPI/I2C), one EUSART with LIN support, a Parallel Slave Port (PSP), and an on-chip 2.5V regulator. Designed as a cost-effective high-performance solution with 5V tolerant I/O, the PIC18F44J10 is ideal for general-purpose embedded control, interface bridging, data acquisition, consumer electronics, and industrial applications requiring 40 MHz performance in a 44-pin package.

Key Specifications

Core Architecture 8-bit PIC18 RISC Architecture
Program Memory 16KB Flash (8K x 16 words)
RAM 1024 bytes (1 KB)
Data EEPROM None (J-series characteristic)
Maximum Speed 40 MHz (10 MIPS)
Operating Voltage 2.0V to 3.6V, 5V tolerant digital inputs
I/O Pins 35
ADC 10-bit, 13 channels with self-calibration
Comparators 2 analog comparators with input multiplexing
Timers Timer0 8/16-bit, Timer1 16-bit, Timer2/3/4 8-bit
PWM 2 CCP (1 standard + 1 enhanced) = 2 PWM modules
Communication EUSART/LIN, 2 x SPI, 2 x I2C (dual MSSP)
Parallel Port PSP (Parallel Slave Port), 8-bit
Voltage Regulator On-chip 2.5V regulator
Oscillator External (crystal, RC, EC) + internal 31 kHz
PLL 4x PLL for up to 40 MHz
Stack Levels 31-level hardware stack
Hardware Multiplier 8 x 8 single-cycle hardware multiplier
Debug Enhanced ICD with 3 hardware breakpoints
5V Tolerant I/O Yes (digital inputs only)
Operating Temperature -40°C to +85°C (Industrial)
Package 44-pin TQFP / QFN

Features

  • High-performance PIC18 RISC CPU with 10 MIPS at 40 MHz
  • 16-bit wide instructions, 8-bit wide data path
  • 31-level deep software accessible hardware stack
  • 8 x 8 single-cycle hardware multiplier
  • Priority levels for interrupts
  • C compiler optimized architecture
  • 5V tolerant digital inputs (mixed voltage system interfacing)
  • On-chip 2.5V regulator for core supply
  • 13-channel 10-bit ADC with auto-acquisition and self-calibration
  • ADC conversion available during Sleep mode
  • Dual analog comparators with input multiplexing
  • One Enhanced CCP (ECCP) with PWM steering
  • One standard CCP (Capture/Compare/PWM) module
  • Two Master Synchronous Serial Port (MSSP) modules
  • Enhanced USART (EUSART) with auto-baud detect and LIN support
  • Parallel Slave Port (PSP) for 8-bit parallel interface
  • 4x Phase Lock Loop (PLL) for 40 MHz operation
  • Two-Speed Oscillator Start-up and Fail-Safe Clock Monitor
  • Power-managed modes: Run, Idle, Sleep
  • Extended Watchdog Timer (WDT) with programmable period
  • Brown-out Reset (BOR) and Power-on Reset (POR)
  • Self-programmable under software control
  • In-Circuit Serial Programming (ICSP) via two pins
  • Enhanced In-Circuit Debug (ICD) with 3 hardware breakpoints
  • Programmable code protection
  • 35 I/O pins with high sink/source current
  • Three external interrupt pins
  • Interrupt-on-change (KBI) on selected pins
  • Flash endurance: 1,000 cycles, 20-year retention

Applications

  • General-purpose embedded control systems
  • Data acquisition and sensor interfaces
  • Consumer electronics and home appliances
  • Interface bridging and protocol conversion
  • Industrial control and monitoring
  • Parallel-to-serial interface conversion (PSP)
  • Low-cost high-performance 8-bit applications
Product Introduction: PIC18F44J10-I Product Introduction

The PIC18F44J10 is a 44-pin high-performance 8-bit RISC microcontroller from Microchip Technology, part of the cost-optimized PIC18 J-series. It features the PIC18 architecture delivering 10 MIPS at 40 MHz, with 16KB (8K x 16) of Flash program memory and 1024 bytes of RAM. Notably, the J-series omits data EEPROM for cost savings, relying instead on Flash self-programming for non-volatile storage. A key feature is the 5V-tolerant digital inputs, enabling direct interfacing with 5V systems while operating from a 2.0V-3.6V core supply using an on-chip 2.5V regulator. The peripheral set includes a 13-channel 10-bit ADC with self-calibration capability, two analog comparators, one ECCP and one standard CCP module, dual MSSP modules (two SPI and two I2C), one EUSART with LIN support, and an 8-bit Parallel Slave Port (PSP). Enhanced ICD with three hardware breakpoints provides robust debug capability. With its 5V-tolerant I/O, dual communication interfaces, parallel port, and cost-effective design, the PIC18F44J10 is well-suited for general-purpose embedded control, interface bridging, data acquisition, and consumer electronics applications requiring 40 MHz performance with mixed-voltage compatibility. Available in TQFP-44 and QFN-44 packages with industrial temperature range (-40°C to +85°C).

Working Principle: PIC18F44J10-I Working Principle

The PIC18F44J10 operates on the PIC18 RISC architecture with 16-bit wide instructions and an 8-bit wide data path, delivering 10 MIPS at 40 MHz. The 31-level deep hardware stack supports deeply nested subroutines and interrupts, while the 8 x 8 single-cycle hardware multiplier accelerates mathematical operations. The on-chip 2.5V voltage regulator powers the core logic, allowing the device to operate from a 2.0V-3.6V supply while digital inputs remain 5V-tolerant, enabling seamless interfacing with 5V systems. The 10-bit ADC uses successive approximation register (SAR) architecture with 13 input channels and self-calibration capability for improved accuracy across temperature and voltage variations. The ADC can operate during Sleep mode for low-power data acquisition. Two analog comparators with input multiplexing provide threshold detection. One ECCP and one standard CCP provide two capture/compare/PWM channels. Dual MSSP modules provide two independent SPI and two independent I2C communication interfaces, while the EUSART handles UART/LIN communication with auto-baud detection. The Parallel Slave Port (PSP) provides an 8-bit bidirectional parallel interface for high-speed data transfer with external processors or bus systems – useful for applications requiring parallel data exchange. Enhanced ICD with three hardware breakpoints enables advanced debugging without external debug headers. Power management includes Run, Idle, and Sleep modes, with the internal 31 kHz oscillator supporting low-power operation and WDT function.

Pin Description: PIC18F44J10-I Pin Definition and Functions
Pin (TQFP-44) Name Type Function
1 MCLR/VPP/RE3 I/P Master Clear / VPP / Port E I/O
2 RA0/AN0 I/O Port A I/O / ADC Channel 0
3 RA1/AN1 I/O Port A I/O / ADC Channel 1
4 RA2/AN2/CVREF/VREF- I/O Port A I/O / ADC2 / Comp Vref / Vref-
5 RA3/AN3/VREF+ I/O Port A I/O / ADC3 / Vref+
6 RA4/T0CKI/C1OUT I/O Port A I/O / T0CKI / Comp1 Output
7 RA5/SS/AN4 I/O Port A I/O / SPI Slave Select / ADC4
8 RE0/RD/AN5 I/O Port E I/O / PSP Read / ADC5
9 RE1/WR/AN6 I/O Port E I/O / PSP Write / ADC6
10 RE2/CS/AN7 I/O Port E I/O / PSP CS / ADC7
11 VSS P Ground Reference
12 RD0/PSP0/AN8 I/O Port D I/O / PSP Bit 0 / ADC8
13 RD1/PSP1/AN9 I/O Port D I/O / PSP Bit 1 / ADC9
14 RD2/PSP2/AN10 I/O Port D I/O / PSP Bit 2 / ADC10
15 RD3/PSP3/AN11 I/O Port D I/O / PSP Bit 3 / ADC11
16 RC0/T1OSO/T1CKI I/O Port C I/O / T1OSO / Timer1 Clock
17 RC1/T1OSI/CCP2 I/O Port C I/O / T1OSI / CCP2
18 RC2/CCP1/P1A I/O Port C I/O / CCP1 / PWM1A
19 RC3/SCK1/SCL1 I/O Port C I/O / SPI1 Clock / I2C1 Clock
20 RD4/PSP4/AN12 I/O Port D I/O / PSP Bit 4 / ADC12
21 RD5/PSP5 I/O Port D I/O / PSP Bit 5
22 RD6/PSP6 I/O Port D I/O / PSP Bit 6
23 RD7/PSP7 I/O Port D I/O / PSP Bit 7
24 RC4/SDI1/SDA1 I/O Port C I/O / SPI1 DI / I2C1 Data
25 RC5/SDO1 I/O Port C I/O / SPI1 Data Out
26 RC6/TX/CK I/O Port C I/O / EUSART TX/Clock
27 RC7/RX/DT I/O Port C I/O / EUSART RX/Data
28 VSS P Ground Reference
29 VDD P Positive Supply Voltage
30 RB0/INT0/P1B I/O Port B I/O / Ext Int0 / PWM1B
31 RB1/INT1/AN10/P1C I/O Port B I/O / Ext Int1 / ADC10 / PWM1C
32 RB2/INT2/AN8/P1D I/O Port B I/O / Ext Int2 / ADC8 / PWM1D
33 RB3/AN9/CCP2 I/O Port B I/O / ADC9 / CCP2
34 RB4/KBI0/AN11 I/O Port B I/O / KBI0 / ADC Channel 11
35 RB5/KBI1/T0CKI/C2OUT I/O Port B I/O / KBI1 / T0CKI / Comp2 Output
36 RB6/KBI2/PGC I/O Port B I/O / KBI2 / ICSP Clock
37 RB7/KBI3/PGD I/O Port B I/O / KBI3 / ICSP Data
38 OSC1/CLKIN/RA7 I Oscillator Input / Clock Input / Port A I/O
39 OSC2/CLKOUT/RA6 O Oscillator Output / Clock Output / Port A I/O
40 VDDCORE P Core Regulator Output (decoupling cap)
41 RE4/SDO2 I/O Port E I/O / SPI2 Data Out
42 RE5/SCK2/SCL2 I/O Port E I/O / SPI2 Clock / I2C2 Clock
43 RE6/SDI2/SDA2 I/O Port E I/O / SPI2 DI / I2C2 Data
44 RE7/SS2 I/O Port E I/O / SPI2 Slave Select
Application Scenarios: In which products and applications is PIC18F44J10-I used
  • General-purpose embedded control and monitoring systems
  • Multi-channel data acquisition with parallel interface
  • Consumer electronics and home appliance controllers
  • Parallel-to-serial protocol conversion and bridging
  • Industrial control with mixed 3.3V/5V systems
  • Low-cost 10 MIPS applications requiring many I/O
  • Human-machine interface (HMI) controllers
Alternative Models: What chips are recommended as replacements for PIC18F44J10-I
Manufacturer Part Number Package Notes
Microchip PIC18F45J10-I 44-pin 32KB Flash, 3.8KB RAM, same peripherals
Microchip PIC18F24J10-I 28-pin 16KB Flash, 10-ch ADC, 28-pin, no PSP
Microchip PIC18F44J11-I 44-pin 16KB Flash, 768B RAM, enhanced peripherals
Microchip PIC18LF44J10-I 44-pin Low-voltage LF variant
Microchip PIC18F45K22-I 40-pin XLP, 28-ch ADC, EEPROM, more advanced

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1