Opens in a new tab

PIC32MX340F512H-80I/PT

PIC32MX 32-bit MCU, 80MHz MIPS32 M4K, 512KB Flash, USB OTG, CAN, 64-LQFP, industrial

26549

Effective Inventory

Image for reference only

Manufacturer Part:

PIC32MX340F512H-80I/PT

Package:

64-pin LQFP (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC32MX340F512H-80I/PT is a 32-bit microcontroller from Microchip Technology based on the MIPS32 M4K core, running at 80MHz with 512KB Flash and 32KB SRAM. It features USB 2.0 OTG, multiple serial communication interfaces, and a 10-bit ADC. Packaged in a 64-pin LQFP (PT package), the -80I suffix indicates 80MHz industrial temperature range (-40C to +85C). This device is part of the PIC32MX3xx/4xx family with USB connectivity.

Key Specifications

Core MIPS32 M4K
Max Frequency 80 MHz
Flash Memory 512 KB
SRAM 32 KB
USB 2.0 OTG (Full Speed, 12 Mbps)
ADC 10-bit, 16 channels, 1 Msps
Timers 5x 16-bit (configurable as 32-bit pairs)
Communication 3x SPI, 2x I2C, 2x UART, 1x CAN 2.0B, 1x PMP
Comparators 2x analog comparators
Supply Voltage 2.3V to 3.6V
Package 64-pin LQFP (10×10 mm)
Operating Temperature -40C to +85C (Industrial)

Features

  • MIPS32 M4K core with DSP extensions at 80MHz (80 DMIPS)
  • 512KB Flash with dual-panel for simultaneous read/write
  • USB 2.0 OTG with dedicated on-chip transceiver
  • CAN 2.0B interface for automotive/industrial networking
  • Parallel Master Port (PMP) for external memory/display interface
  • DMA controller for autonomous peripheral-to-memory transfers

Applications

  • USB peripherals and host devices
  • Industrial control with CAN bus communication
  • Medical instrumentation and monitoring
  • Consumer electronics with USB connectivity
  • Embedded networking gateways
Product Introduction: PIC32MX340F512H-80I/PT Product Introduction

The PIC32MX340F512H-80I/PT is a 32-bit microcontroller from Microchip Technology based on the MIPS32 M4K core, operating at 80MHz with 80 DMIPS performance. It features 512KB Flash, 32KB SRAM, USB 2.0 OTG, CAN 2.0B, and a 10-bit ADC in a 64-pin LQFP package. The industrial temperature range and CAN interface make it suitable for automotive and industrial applications requiring USB connectivity and robust communication.

Working Principle: PIC32MX340F512H-80I/PT Working Principle

The PIC32MX340F512H-80I/PT operates on the MIPS32 M4K processor core with a 5-stage pipeline executing up to 80 DMIPS at 80MHz. The core supports User and Kernel modes with a shadow register set for fast interrupt handling. The bus matrix provides separate instruction and data paths (Harvard architecture) with 512KB Flash connected via the prefetch cache module for zero-wait-state execution at full speed. The USB 2.0 OTG module implements both host and device functions with a dedicated on-chip transceiver, supporting full-speed (12 Mbps) transfers with integrated FIFO buffers. The CAN 2.0B module handles CAN protocol processing including bit timing, message filtering, and error management. The DMA controller enables autonomous data transfer between peripherals (SPI, UART, ADC) and memory without CPU intervention. The Parallel Master Port (PMP) provides a parallel interface to external memory, displays, or other peripherals with configurable timing.

Pin Description: PIC32MX340F512H-80I/PT Pin Definition and Functions
Pin Group Name Type Function
Power VDD, VDDIO, VSS, VUSB Power 3.3V core/I/O, USB transceiver supply
GPIO RA0-RA7, RB0-RB15, RC0-RC13 Bidirectional Up to 53 I/O pins with alternate functions
USB D+, D- USB USB differential data pair
CAN CANTX, CANRX CAN CAN 2.0B transmit and receive
Debug PGEC1, PGED1 Debug ICSP programming and debug interface
Reset MCLR Input Master clear reset (active low)
Application Scenarios: In which products and applications is PIC32MX340F512H-80I/PT used
Application Circuit Role Key Requirement
USB Device Custom HID or CDC peripheral USB OTG, 512KB Flash, 80MHz
Industrial CAN Node CAN bus controller CAN 2.0B, 32KB SRAM, industrial temp
Medical Monitor Data acquisition and USB upload 10-bit ADC, USB, DMA, 512KB
Embedded Gateway Protocol conversion bridge 3x SPI, 2x I2C, 2x UART, CAN
Consumer Device Main controller with USB 80MHz, USB OTG, PMP for display
Alternative Models: What chips are recommended as replacements for PIC32MX340F512H-80I/PT
Model Manufacturer Key Difference
PIC32MX460F512L-80I/PT Microchip Same family, 100-pin, more I/O and Ethernet
PIC32MX270F256D-50I/PT Microchip Lower cost, 256KB Flash, no CAN, no USB
STM32F405RGT6 STMicroelectronics Cortex-M4, 168MHz, more performance
ATSAM3X8EA-AU Microchip Cortex-M3, 84MHz, 512KB, dual CAN
PIC32MZ2048ECM100 Microchip PIC32MZ, 200MHz, 2MB Flash, Ethernet

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1