Opens in a new tab

Home » Integrated Circuits ICs » R1LP0108ESN-5SI#S1

R1LP0108ESN-5SI#S1

R1LP0108ESN-5SI#S1 – SRAM (Low Power)

4524

Effective Inventory

Image for reference only

Manufacturer Part:

R1LP0108ESN-5SI#S1

Package:

TSOP-32 (8×13.4mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The R1LP0108ESN-5SI#S1 from Renesas is an 8Mbit (1Mx8) low-power asynchronous SRAM. 55ns access time with 15uA standby current for battery-backup operation. 3.3V supply. TSOP-32 industrial package. For mobile and battery-backed memory applications.

Key Specifications

Type Low-Power Asynchronous SRAM
Density 8 Mbit (1M x 8)
Organization 1M x 8
Access Time 55 ns
Supply Voltage 2.7V to 3.6V (3.3V)
Standby Current 15 uA typ (data retention)
Active Current 40 mA max at 55ns
Operating Temp -40 to +85C (Industrial)
Package TSOP-32 (8×13.4mm)

Working Principle

The R1LP0108ESN uses a 6T SRAM cell array with power management features. The chip enable (CE2) pin, when deasserted, places the device in deep power-down mode with 15uA standby current suitable for battery-backed data retention. Address access time is 55ns. The output enable (OE) and write enable (WE) control read and write operations independently. The low-power design makes this SRAM ideal for mobile devices where battery life is critical and data must be retained during sleep modes.

Applications

  • Mobile devices
  • Battery-backed memory
  • Cache buffer
  • Networking
Product Introduction: R1LP0108ESN-5SI#S1 Product Introduction

The R1LP0108ESN-5SI#S1 from Renesas is an 8Mbit (1Mx8) low-power asynchronous SRAM. 55ns access time with 15uA standby current for battery-backup operation. 3.3V supply. TSOP-32 industrial package. For mobile and battery-backed memory applications.

Working Principle: R1LP0108ESN-5SI#S1 Working Principle

The R1LP0108ESN uses a 6T SRAM cell array with power management features. The chip enable (CE2) pin, when deasserted, places the device in deep power-down mode with 15uA standby current suitable for battery-backed data retention. Address access time is 55ns. The output enable (OE) and write enable (WE) control read and write operations independently. The low-power design makes this SRAM ideal for mobile devices where battery life is critical and data must be retained during sleep modes.

Pin Description: R1LP0108ESN-5SI#S1 Pin Definition and Functions
Pin Group Name Desc
A0-A19 Address 20-bit address
DQ0-DQ7 Data 8-bit I/O
CE1,CE2,OE,WE Control Enable signals
Application Scenarios: In which products and applications is R1LP0108ESN-5SI#S1 used
  • Mobile devices
  • Battery-backed memory
  • Cache buffer
  • Networking
Alternative Models: What chips are recommended as replacements for R1LP0108ESN-5SI#S1
Model Vendor Diff
R1LP0108ESN-45SI Renesas 45ns version

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1