Opens in a new tab

Home » Passive Components, Resistors » RC-0603FR-071KL

RC-0603FR-071KL

1kΩ ±1% 1/10W thick film chip resistor, 0603 package, Yageo RC series

98765

Effective Inventory

Image for reference only

Manufacturer Part:

RC-0603FR-071KL

Package:

0603 (1608 Metric), 1.6 x 0.8mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The RC-0603FR-071KL is a 1kΩ thick film chip resistor from Yageo, featuring ±1% tolerance and 1/10W power rating in a compact 0603 package. This high-precision surface mount resistor provides excellent stability and reliability, making it ideal for precision analog circuits, voltage dividers, and general-purpose applications where tight tolerance is required.

Key Specifications

Parameter Value
Manufacturer Yageo
Resistance 1kΩ (1000Ω)
Tolerance ±1% (F)
Power Rating 1/10W (0.1W)
Voltage Rating 50V (working), 100V (overload)
Package / Case 0603 (1608 Metric) 1.6 x 0.8mm
Temperature Coefficient ±100 ppm/°C
Operating Temperature -55°C to +155°C
Resistance Film Thick film (RuO₂ based)
Termination Nickel barrier + Tin plating

Features

  • High precision ±1% tolerance
  • Wide operating temperature range (-55°C to +155°C)
  • Excellent long-term stability
  • Low noise characteristics
  • RoHS compliant and halogen-free
  • Anti-sulfur resistant termination available
  • Suitable for reflow and wave soldering
  • AEC-Q200 qualified (automotive variants available)
  • Reliable thin nickel barrier termination

Applications

  • Voltage dividers and current sensing
  • Precision analog circuits
  • General purpose pull-up/down resistors
  • Signal conditioning circuits
  • Consumer electronics and mobile devices
  • Automotive electronics
  • Industrial control equipment
Product Introduction: RC-0603FR-071KL Product Introduction

The RC-0603FR-071KL is a high-precision thick film chip resistor from Yageo’s RC series, offering 1kΩ resistance with ±1% tolerance and a 1/10W power rating in a compact 0603 (1608 metric) surface mount package. Featuring a ruthenium oxide (RuO₂) based resistive element on a high-purity alumina substrate with nickel barrier terminations, this resistor delivers excellent electrical stability, low noise, and reliable solderability. With a temperature coefficient of ±100ppm/°C and an operating temperature range of -55°C to +155°C, it maintains precise resistance values across a wide range of environmental conditions. This RoHS-compliant resistor is suitable for reflow and wave soldering processes, making it ideal for high-volume SMT assembly.

Working Principle: RC-0603FR-071KL Working Principle

A thick film chip resistor is constructed by depositing a resistive paste (typically ruthenium oxide, RuO₂) onto a ceramic alumina substrate using screen printing, then firing at high temperature to form a solid resistive film. The resistance value is determined by the sheet resistance of the material and the geometric pattern (length/width ratio) of the printed resistor. Laser trimming is used to achieve precise resistance values within tight tolerances. Protective glass coatings provide environmental protection. Termination electrodes are formed on the ends with a nickel barrier layer and tin plating to ensure good solderability and prevent leaching during soldering. Current flows through the resistive element, dissipating power as heat according to Ohm’s law (P = I²R).

Pin Description: RC-0603FR-071KL Pin Definition and Functions
Terminal Description
Terminal 1 Resistor terminal A (non-polarized)
Terminal 2 Resistor terminal B (non-polarized)

Chip resistors are non-polarized passive components and can be installed in either orientation.

Application Scenarios: In which products and applications is RC-0603FR-071KL used
  • Precision voltage dividers in analog and digital circuits
  • Current sensing and measurement circuits
  • Pull-up and pull-down resistors for digital I/O
  • Signal conditioning and filtering networks
  • Op-amp feedback and gain setting
  • Consumer electronics, smartphones, and wearables
  • Automotive electronics and industrial control systems
Alternative Models: What chips are recommended as replacements for RC-0603FR-071KL
Model Manufacturer Resistance Tolerance Package
CR0603-FX-1001GLF Bourns 1kΩ ±1% 0603
RC0603FR-071KL Yageo 1kΩ ±1% 0603
RK73H1ETTP1001F KOA 1kΩ ±1% 0603
ERJ-6ENF1001V Panasonic 1kΩ ±1% 0603

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1