Opens in a new tab

Home » Passive Components, Resistors » RC0603FR-07150KL

RC0603FR-07150KL

Yageo RC series general purpose thick film chip resistor, 150kΩ ±1%, 0.1W, ±100ppm/°C TCR, 75V, -55°C to +155°C

4543

Effective Inventory

Image for reference only

Manufacturer Part:

RC0603FR-07150KL

Package:

0603 (1608 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The RC0603FR-07150KL is a general-purpose thick film chip resistor from Yageo’s RC series, offering 150kΩ resistance with ±1% tolerance in a standard 0603 (1608 Metric) surface-mount package. With a 0.1W (1/10W) power rating and ±100ppm/°C temperature coefficient, this resistor provides reliable performance across the -55°C to +155°C operating temperature range. The RC series is Yageo’s most widely used thick film resistor line, suitable for consumer electronics, industrial controls, telecommunications, and general circuit applications where a balance of performance and cost is required.

Key Specifications

Resistance 150kΩ
Tolerance ±1%
Power Rating 0.1W (1/10W) @ 70°C
Operating Voltage 75V
Overload Voltage 150V
Technology Thick Film
Temperature Coefficient ±100ppm/°C
Package / Case 0603 (1608 Metric)
Dimensions (L × W × H) 1.60mm × 0.80mm × 0.45mm
Operating Temperature -55°C to +155°C
Power Derating 70°C to 155°C (linear derating)
Moisture Sensitivity MSL 1 (Unlimited)
Termination Ni-barrier, Sn-plated (Matte Tin)
Packaging 7″ Reel, Paper Tape (5,000 pcs/reel)
Standards RoHS Compliant, Halogen Free
Series RC Series (General Purpose Thick Film)

Features

  • General-purpose thick film chip resistor with ±1% tolerance
  • Wide operating temperature range: -55°C to +155°C
  • Standard 0603 (1608 Metric) package — industry workhorse
  • Nickel-barrier termination with matte tin for excellent solderability
  • MSL Level 1 — no preconditioning or dry bake required
  • Cost-effective solution for high-volume production
  • RoHS compliant and halogen-free
  • High reliability glass protective overcoat
  • Compatible with all standard SMT assembly processes
  • Yageo quality — global leading chip resistor manufacturer

Applications

  • General purpose electronic circuits
  • Consumer electronics — TVs, audio, home appliances
  • Power supply circuits and voltage dividers
  • Telecommunications and networking equipment
  • Industrial control and automation
  • Automotive electronics (general circuits)
  • Computer peripherals and motherboards
  • LED lighting and driver circuits
  • Pull-up / pull-down resistor networks
  • Signal conditioning and filtering
Product Introduction: RC0603FR-07150KL Product Introduction

The RC0603FR-07150KL is a 150kΩ general-purpose thick film chip resistor from Yageo’s RC series — one of the most widely used thick film resistor lines in the electronics industry. Housed in the ubiquitous 0603 (1608 Metric) surface-mount package, this resistor offers a balanced combination of performance, reliability, and cost-effectiveness that makes it a staple in virtually every category of electronic equipment.

With a 150kΩ resistance value and ±1% tolerance, this resistor covers a wide range of general-purpose circuit applications including pull-up and pull-down networks, voltage dividers, current limiting, and signal conditioning. The ±100ppm/°C temperature coefficient provides adequate stability for most non-precision applications across the full -55°C to +155°C operating temperature range.

Manufactured using proven thick film screen-printing technology, the resistor element is deposited onto a high-purity alumina ceramic substrate and fired at high temperature to form a durable, glass-bonded resistive film. A protective glass overcoat shields the resistive element from environmental factors including moisture, dust, and mechanical damage. The laser trimming process adjusts the resistance to within the ±1% tolerance specification with high precision.

The nickel-barrier termination system features a matte tin outer plating that provides excellent solderability and is compatible with both leaded and lead-free soldering processes. The 07 suffix in the part number indicates 7-inch reel packaging with paper tape (R = paper tape), containing 5,000 pieces per reel — standard configuration for high-speed automated SMT assembly.

With a power rating of 0.1W (1/10 watt) at 70°C ambient temperature and MSL Level 1 classification, the RC0603FR-07150KL is fully RoHS compliant and halogen-free, meeting all current environmental regulations for global electronics manufacturing. Yageo, as one of the world’s largest passive component manufacturers, ensures consistent quality and supply reliability for this mainstream product line.

Working Principle: RC0603FR-07150KL Working Principle

A thick film chip resistor operates by providing a controlled resistance path through a conductive ceramic-metal (cermet) film that is screen-printed and fired onto an insulating ceramic substrate. The term “thick film” refers to the film thickness — typically 10 to 25 micrometers — which is much thicker than the sputtered films used in thin film resistors.

In the RC0603FR-07150KL, the resistor is built on a high-purity 96% alumina (Al2O3) ceramic substrate. Alumina is chosen for its excellent electrical insulation, high thermal conductivity (approximately 20-30 W/m·K), good mechanical strength, and ability to withstand the high firing temperatures used in thick film processing.

The fabrication process begins with the application of back-side terminations — conductive pads on the bottom of the substrate that will later connect to the top-side resistor terminations through edge wrap-around. Then, the main resistor paste is screen-printed onto the substrate top surface. The resistor paste is a complex mixture containing:
– Conductive particles (typically ruthenium oxide, RuO2, or silver-palladium, Ag-Pd) that provide the electrical conductivity
– Glass frit (finely ground glass powder) that acts as a binder, melting during firing to bond the conductive particles together and to the substrate
– Organic vehicles (solvents, resins, and thickeners) that give the paste the proper viscosity for screen-printing

After printing, the resistor is dried to remove solvents and then fired at high temperature (typically 800°C to 900°C) in a conveyor belt furnace. During firing, the organic materials burn off completely, and the glass frit melts and vitrifies, forming a glassy matrix that holds the conductive particles in suspension and bonds the entire structure firmly to the ceramic substrate. The resulting resistive film is a composite structure of conductive particles dispersed in a glassy ceramic matrix — hence the name “cermet” (ceramic-metal).

The resistance value after firing is typically lower than the target value (around 70-80% of target). Laser trimming is then used to precisely adjust the resistance upward. A focused laser beam cuts a notch or series of notches into the resistor film, effectively lengthening the current path and increasing resistance. The trimming process continues, with continuous resistance measurement, until the value falls within the specified ±1% tolerance range.

A protective glass overcoat layer is then printed and fired over the resistor element. This overcoat provides electrical insulation, mechanical protection, and a barrier against moisture and environmental contaminants. Additional marking may be applied for value identification (though 0603 size resistors are typically unmarked due to space constraints).

The end terminations are applied in multiple layers. The base electrode connects to the resistor film and wraps around the chip ends. A nickel barrier layer is electroplated over the base electrode to prevent “solder leaching” — the dissolution of the electrode metal into molten solder during PCB assembly. Finally, a tin (Sn) outer plating is applied to provide excellent solder wetting and joint reliability.

When current flows through the thick film resistor, electrons travel through the network of conductive particles, encountering resistance at particle-to-particle contacts and grain boundaries. This electron scattering converts electrical energy into heat (Joule heating). The 0.1W power rating at 70°C represents the maximum continuous power the resistor can safely dissipate at that temperature, with linear derating to zero power at 155°C maximum. The alumina substrate efficiently conducts the generated heat to the terminations and PCB, enabling reliable operation within the rated power.

Pin Description: RC0603FR-07150KL Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First resistor terminal — thick film electrode with Ni barrier layer and matte Sn outer plating
Terminal 2 (End B) End Electrode Second resistor terminal — thick film electrode with Ni barrier layer and matte Sn outer plating

Note: The RC0603FR-07150KL is a non-polarized passive component. Either terminal can be connected to either side of the circuit without affecting performance. The 0603 package is the most widely used surface-mount resistor size, balancing board space efficiency with ease of assembly.

Application Scenarios: In which products and applications is RC0603FR-07150KL used
  • Pull-up and pull-down resistor networks in digital circuits
  • Voltage dividers and level shifting circuits
  • Signal filtering and RC network circuits
  • Current limiting for LEDs and indicators
  • Consumer electronics — televisions, set-top boxes, audio equipment
  • Industrial control systems and PLC I/O modules
  • Power supply feedback and compensation networks
  • Telecommunications and data networking equipment
  • Automotive body electronics and infotainment
  • General purpose electronic circuit design
Alternative Models: What chips are recommended as replacements for RC0603FR-07150KL
Model Resistance Tolerance Power Package
RC0603FR-07100KL 100kΩ ±1% 0.1W 0603
RC0603FR-07220KL 220kΩ ±1% 0.1W 0603
RC0603FR-07330KL 330kΩ ±1% 0.1W 0603
RC0603JR-07150KL 150kΩ ±5% 0.1W 0603
RC0805FR-07150KL 150kΩ ±1% 0.125W 0805
AC0603FR-07150KL 150kΩ ±1% 0.1W 0603 (AEC-Q200)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1