Opens in a new tab

RPP20-2405S

20W DC-DC, 24Vin 5Vout 4A, 4:1 range, 3000VDC iso, EN50155, -40 to 85C

1500

Effective Inventory

Image for reference only

Manufacturer Part:

RPP20-2405S

Package:

Through-hole module (50.8×25.4×10.2mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The RECOM RPP20-2405S is a 20W isolated DC-DC converter with 24V input and 5V single output. With 3000VDC isolation, wide 4:1 input range, and EN 50155 railway compliance, it is designed for rail and harsh environment applications.

Key Specifications

Power 20 W
Input Voltage 9 ~ 36 VDC (nom. 24V, 4:1 range)
Output Voltage 5 V (single)
Output Current 4 A
Efficiency ~90% typ
Isolation 3000 VDC
Regulation ±0.2% line, ±0.5% load
Operating Temperature -40°C to +85°C (with derating)
Package Through-hole module (50.8×25.4×10.2mm)

Features

  • 4:1 ultra-wide input range
  • 3000VDC reinforced isolation
  • EN 50155 railway compliance
  • Full protection (OVP, OCP, UVLO, SCP)
  • High 90% efficiency
  • Remote on/off control

Applications

  • Railway rolling stock power systems
  • Industrial 24V bus to 5V logic
  • Telecom and datacom power
  • Distributed power architectures
Product Introduction: RPP20-2405S Product Introduction

The RPP20-2405S from RECOM Power is a 20W isolated DC-DC converter from the RPP20 railway-grade series, with 24V nominal input (9-36VDC, 4:1 range) and 5V single output at 4A. With 3000VDC reinforced isolation, EN 50155 railway compliance, and full protection suite (OVP, OCP, UVLO, SCP), it is designed for demanding railway and industrial environments. The 90% typical efficiency minimizes thermal management requirements, while remote on/off enables power sequencing.

Working Principle: RPP20-2405S Working Principle

The RPP20 uses a half-bridge or forward converter topology with a planar transformer for high efficiency and compact size. The 4:1 wide input range is achieved through feedforward control. The 3000VDC isolation barrier between primary and secondary meets reinforced isolation requirements for railway EN 50155 compliance. Output regulation uses an optocoupler feedback loop with error amplifier. The full protection suite monitors output voltage, current, and input undervoltage, shutting down the converter when limits are exceeded with automatic recovery.

Pin Description: RPP20-2405S Pin Definition and Functions
Pin Name Type Description
1 +Vin Input Positive input (24V)
2 Ctrl Input Remote on/off
3 -Vin Input Negative input
5 +Vout Output +5V output
6 -Vout Output Output return/GND
Application Scenarios: In which products and applications is RPP20-2405S used
  • Railway rolling stock 24V to 5V logic power
  • Industrial DIN-rail power distribution
  • Telecom base station 24V bus conversion
  • Military and defense 28V systems
Alternative Models: What chips are recommended as replacements for RPP20-2405S
Model Manufacturer Key Difference
RPP20-2403.3S RECOM 3.3V output variant
VQA20-D5-SMT CUI 20W 5V railway equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1