Opens in a new tab

S1B

1A 100V rectifier diode, SMB, 50A surge, 1.1V VF, general-purpose AC-DC rectification

7293

Effective Inventory

Image for reference only

Manufacturer Part:

S1B

Package:

SMB / DO-214AA (5.30 x 2.60 x 2.15 mm, surface mount)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The S1B from Diodes Incorporated is a 1A, 100V general-purpose silicon rectifier diode in a SMB (DO-214AA) package. With 50A surge current rating, it is widely used in AC-DC rectification and reverse polarity protection.

Key Specifications

Reverse Voltage (VR) 100 V
Average Rectified Current (IO) 1 A
Forward Voltage (VF) 1.1 V (max at 1A)
Surge Current (IFSM) 50 A (8.3ms half-sine)
Reverse Current (IR) 5 uA (max at VR)
Operating Temperature -65C to +150C (junction)

Features

  • 100V reverse voltage rating for 48V and lower AC-DC rectification
  • 1A average rectified current in compact SMB surface-mount package
  • 50A non-repetitive surge current withstands inrush and fault conditions
  • 1.1V maximum forward voltage at rated current for moderate conduction loss
  • 5uA maximum reverse leakage for minimal power waste in blocking state
  • High-temperature soldering guaranteed to 260C / 10 seconds

Applications

  • AC-DC power supply rectification at 100V/1A
  • Reverse polarity protection for DC power inputs
  • Freewheeling diode for relay and solenoid coils
  • DC power supply OR-ing and blocking
Product Introduction: S1B Product Introduction

The S1B from Diodes Incorporated is a 1A, 100V general-purpose silicon rectifier diode in an SMB (DO-214AA) surface-mount package. The S1 series (S1A through S1M) covers reverse voltage ratings from 50V to 1000V, with the S1B specifically rated at 100V for applications using 24VAC/48VDC and lower supplies. The 1A average rectified current rating supports typical small power supply rectification tasks, while the 50A non-repetitive surge current rating (8.3ms single half-sine wave) provides ruggedness against inrush currents during initial power-up with capacitive loads. The 1.1V maximum forward voltage at rated current represents a moderate conduction loss of 1.1W at full load, manageable with standard PCB copper area in the SMB package. The 5uA maximum reverse leakage current at rated reverse voltage minimizes power waste when the diode is in the blocking state. The S1B is a commodity component available from multiple manufacturers, ensuring supply security and competitive pricing.

Working Principle: S1B Working Principle

The S1B is a standard P-N junction rectifier diode. (1) Forward Bias: When the anode voltage exceeds the cathode voltage by approximately 0.7V or more, the diode conducts. The forward current is limited only by the external circuit impedance, and the forward voltage drop remains relatively constant at 0.9-1.1V. The forward voltage has a negative temperature coefficient, decreasing by approximately -2mV/C as temperature increases. (2) Reverse Bias: When the cathode voltage exceeds the anode voltage (up to 100V), the diode blocks current flow. Only a small leakage current (5uA maximum) flows in the reverse direction. (3) Rectification: In AC-DC power supply applications, the diode conducts during the positive half-cycle of the AC input and blocks during the negative half-cycle, converting AC to pulsating DC. A filter capacitor smooths the pulsating DC into a relatively constant DC voltage. (4) Surge Withstand: The 50A surge rating reflects the diodes ability to absorb the energy from the initial charging of the filter capacitor after power-up.

Pin Description: S1B Pin Definition and Functions
Pin Name Type Function
Cathode K Terminal Cathode (band marking on package)
Anode A Terminal Anode
Application Scenarios: In which products and applications is S1B used
  • AC-DC power supply rectification at 100V/1A in SMB surface-mount
  • Reverse polarity protection for DC power inputs with 50A surge rating
  • Freewheeling diode for relay and solenoid coils at 1A continuous
  • DC power supply OR-ing and blocking with 5uA reverse leakage
Alternative Models: What chips are recommended as replacements for S1B
Manufacturer Part Number Package Notes
Vishay S1B-E3/52T SMB Equivalent, Vishay brand
onsemi S1BRLG SMB Equivalent, onsemi brand
Diodes Inc S1A SMB 50V version, same series
Diodes Inc S1D SMB 200V version, same series

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1