Opens in a new tab

S8550

PNP BJT, -25V, -1.5A, hFE 85-300, 100MHz, TO-92/SOT-23, S8050 complement

200000

Effective Inventory

Image for reference only

Manufacturer Part:

S8550

Package:

TO-92 / SOT-23-3

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The S8550 is a general-purpose PNP bipolar junction transistor (BJT) in a TO-92 or SOT-23 package. With -25V VCEO, -1.5A IC, and 100MHz fT, it is one of the most widely used PNP transistors for low-power switching, amplification, and complementary push-pull circuits paired with the NPN S8050.

Key Specifications

Polarity PNP
VCEO (Collector-Emitter) -25V
VCBO (Collector-Base) -30V
VEBO (Emitter-Base) -5V
IC (Collector Current) -1.5A (max)
Power Dissipation 1W (TO-92)
hFE (DC Gain) 85-300 (classified by suffix)
Transition Frequency 100MHz (typ)
VCE(sat) -0.5V (max at IC=-500mA)
Operating Temperature -55C to +150C
Package TO-92 / SOT-23

Features

  • Complementary pair with S8050 (NPN)
  • High current capability: -1.5A
  • 100MHz transition frequency
  • Three hFE classifications (B, C, D)
  • Low saturation voltage: -0.5V
  • Low cost and wide availability

Applications

  • Low-power switching
  • Audio amplification (push-pull)
  • Motor drive (low power)
  • LED driving
  • General-purpose amplification
Product Introduction: S8550 Product Introduction

The S8550 is a general-purpose PNP bipolar junction transistor commonly available in TO-92 through-hole and SOT-23 surface-mount packages. With a -25V collector-emitter voltage rating, -1.5A continuous collector current, and 100MHz transition frequency, it is suitable for a wide range of low-power switching and amplification applications. The S8550 is the complementary PNP partner to the S8050 NPN transistor, enabling push-pull amplifier and complementary switch designs. Three hFE classification grades (B: 85-160, C: 120-200, D: 160-300) allow designers to select gain matching for specific circuits. The low saturation voltage of -0.5V at 500mA makes it effective as a low-side or high-side switch for LEDs, relays, and small motors.

Working Principle: S8550 Working Principle

The S8550 is a PNP bipolar junction transistor. Current flows from emitter to collector when the base is biased negative relative to the emitter by approximately 0.6-0.7V. A small base current (IB) controls a larger collector current (IC) with the ratio IC/IB = hFE (DC current gain, 85-300 depending on grade). In the active region, the transistor acts as a current amplifier. In saturation, both the base-emitter and base-collector junctions are forward-biased, and VCE drops to the saturation voltage (-0.5V max at 500mA). The 100MHz transition frequency (fT) indicates the frequency at which hFE drops to unity, supporting audio and moderate-frequency applications. As a PNP device, the S8550 sources current from the positive supply through the load, making it ideal for high-side switching and complementary push-pull output stages.

Pin Description: S8550 Pin Definition and Functions
Pin (TO-92) Name Type Description
1 Emitter Power Emitter; connects to positive supply in common-emitter
2 Collector Power Collector; connects to load
3 Base Input Base; drive negative relative to emitter to turn on
Application Scenarios: In which products and applications is S8550 used
  • Push-Pull Audio Amplifier: Pairs with S8050 NPN in Class AB push-pull output stage for small speaker amplifiers with complementary symmetry reducing crossover distortion
  • High-Side Load Switch: Connects emitter to positive supply, collector to load, and base drive through a resistor from MCU GPIO to control LEDs, buzzers, or small motors sourcing up to 1.5A
  • Signal Amplification: Amplifies audio and sensor signals in common-emitter or common-base configurations with hFE up to 300 and 100MHz bandwidth
Alternative Models: What chips are recommended as replacements for S8550
Model Polarity VCEO IC Key Difference
S8050 NPN 25V 1.5A Complementary NPN pair
2N3906 PNP -40V -200mA Lower current, higher voltage
BC557B PNP -45V -100mA Higher voltage, lower current
BD140 PNP -80V -1.5A Higher voltage, TO-126

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1