Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » SAFFB742MAA0F0AR1X

SAFFB742MAA0F0AR1X

SAW single filter for LTE Band12/Band13 Rx, 737.5MHz, 0402, 5-pin unbalanced

6676

Effective Inventory

Image for reference only

Manufacturer Part:

SAFFB742MAA0F0AR1X

Package:

0402 (1.0 x 0.5 x 0.45 mm) 5-pin

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SAFFB742MAA0F0AR1X is a SAW (Surface Acoustic Wave) single filter manufactured by Murata Electronics, designed for LTE Band 12 and Band 13 receiver filtering in a 0402 (1.0 x 0.5 mm) ultra-compact package. With a center frequency of 737.5 MHz, this unbalanced 5-pin filter provides excellent insertion loss of 1.5 dB typical and high out-of-band attenuation up to 57 dB, making it ideal for multiband smartphone front-end modules.

Key Specifications

Filter Type SAW Single Filter (Rx)
Supported Bands Band 12 (729-746 MHz), Band 13 (746-756 MHz)
Center Frequency 737.5 MHz
Insertion Loss (B12 Rx) 1.5 dB typical, 2.5 dB max
Insertion Loss (B13 Rx) 1.7 dB typical, 2.5 dB max
Ripple Deviation 0.5 dB typical (B12), 1.0 dB typical (B13)
Attenuation (B12 Tx) 48 dB min, 57 dB typical
Attenuation (30-31 MHz) 50 dB min, 65 dB typical
VSWR 1.8 typical (B12)
Package 0402 (1.0 x 0.5 x 0.45 mm), 5-pin

Features

  • Ultra-compact 0402 footprint for high-density smartphone RF front-end design
  • Dual-band support for Band 12 and Band 13 LTE receiver paths
  • Low insertion loss of 1.5 dB typical for minimal receiver sensitivity degradation
  • High out-of-band attenuation up to 57 dB for excellent Tx rejection
  • 5-pin unbalanced configuration for simplified PCB layout

Applications

  • LTE smartphone Band 12/13 receiver front-end filtering
  • Multiband cellular module RF path selection
  • IoT and M2M device LTE Band 12/13 receiver filtering
  • Tablet and data card LTE front-end modules
  • Automotive telematics LTE receiver chains
Product Introduction: SAFFB742MAA0F0AR1X Product Introduction

The SAFFB742MAA0F0AR1X from Murata is a SAW single filter designed for LTE Band 12 and Band 13 receiver paths in an ultra-compact 0402 (1.0 x 0.5 mm) 5-pin package. With a center frequency of 737.5 MHz, the filter achieves insertion loss as low as 1.5 dB typical in the Band 12 Rx passband and provides high out-of-band attenuation of 48 dB minimum (57 dB typical) against the Band 12 Tx frequencies. The 0402 footprint represents Murata’s industry-leading miniaturization, enabling denser RF front-end layouts in modern smartphones. The R1X suffix denotes tape-and-reel packaging with 10,000 pieces per 178mm reel.

Working Principle: SAFFB742MAA0F0AR1X Working Principle

The SAFFB742MAA0F0AR1X uses Surface Acoustic Wave (SAW) technology to filter RF signals. An input interdigital transducer (IDT) converts the electrical RF signal into a mechanical acoustic wave that propagates along the piezoelectric substrate surface. The frequency-dependent propagation characteristics of the SAW and the geometry of the output IDT determine the filter passband. Frequencies within the passband (729-756 MHz) are efficiently converted back to electrical signals at the output, while out-of-band frequencies are not phase-matched and are attenuated. The 5-pin unbalanced configuration simplifies impedance matching and PCB routing compared to balanced designs.

Pin Description: SAFFB742MAA0F0AR1X Pin Definition and Functions
Pin Name Type Function
1 IN RF Input Unbalanced RF signal input from antenna switch
2 GND Ground Ground connection for substrate shielding
3 OUT RF Output Filtered RF output to LNA/receiver
4 GND Ground Ground connection
5 GND Ground Ground connection
Application Scenarios: In which products and applications is SAFFB742MAA0F0AR1X used
  • LTE smartphone Band 12 (700 MHz lower A) receiver path filtering between antenna switch and LNA
  • LTE smartphone Band 13 (700 MHz upper C) receiver path filtering for Verizon/AT&T networks
  • IoT gateway LTE modem Band 12/13 Rx filtering for North American deployments
  • Automotive telematics control unit LTE receiver front-end module
  • Tablet and laptop LTE module Band 12/13 receive filtering
Alternative Models: What chips are recommended as replacements for SAFFB742MAA0F0AR1X
Manufacturer Part Number Package Notes
Murata SAFFB742MAA0F0AR1S 0402 Sample reel (330mm) version
Qorvo QFM742 2.0×1.6mm SAW filter for B12/B13
Skyworks SKY65301-11 QFN B12/B13 front-end module with filter
Broadcom AFEM-8065 QFN B12/B13 FEM with integrated SAW
TDK HPCA745M2A 0402 SAW duplexer B12/B13

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1