Opens in a new tab

SHT30-DIS-B

Digital RH/Temp sensor, +/-2% RH, +/-0.3C, I2C, DFN-8 2.5×2.5mm

8891

Effective Inventory

Image for reference only

Manufacturer Part:

SHT30-DIS-B

Package:

DFN-8 (2.5 x 2.5 x 0.9 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SHT30-DIS-B from Sensirion is a digital humidity and temperature sensor in a DFN-8 package. Providing +/-2% RH accuracy and +/-0.3C temperature accuracy over I2C, it is a cost-effective upgrade from the SHT2x series with wider supply range and faster measurement.

Key Specifications

Humidity Accuracy +/-2% RH (typical)
Temperature Accuracy +/-0.3C (typical)
Humidity Range 0% ~ 100% RH
Temperature Range -40°C ~ +125°C
Interface I2C (2 addresses: 0x44/0x45)
Supply Voltage 2.15V ~ 5.5V
Supply Current 0.8mA (measuring), 0.6uA (idle)
Package DFN-8 (2.5 x 2.5 x 0.9mm)

Features

  • +/-2% RH and +/-0.3C accuracy
  • Wide 2.15V to 5.5V supply range
  • I2C interface with 2 address options
  • Multiple measurement modes: single shot, periodic
  • Built-in heater for condensation recovery
  • Alert mode with programmable thresholds

Applications

  • Weather stations and environmental monitoring
  • HVAC and building automation
  • Consumer appliances (dryers, humidifiers)
  • Industrial process humidity control
  • Smart home and IoT sensors
Product Introduction: SHT30-DIS-B Product Introduction

The SHT30-DIS-B from Sensirion is a digital humidity and temperature sensor in a compact DFN-8 (2.5×2.5mm) package. It provides +/-2% RH humidity accuracy and +/-0.3C temperature accuracy via an I2C interface. The wide 2.15V to 5.5V supply range simplifies integration with various MCU voltage domains. Multiple operating modes (single shot, periodic auto-measurement at 0.5-10Hz) provide flexibility for power/performance tradeoffs. The built-in heater helps recover from condensation. The SHT30 is a cost-effective upgrade from SHT2x with improved accuracy and wider operating range.

Working Principle: SHT30-DIS-B Working Principle

The SHT30-DIS-B uses a capacitive humidity sensor element and a bandgap temperature sensor element, both fabricated on a single CMOS chip. The capacitive humidity sensor absorbs or desorbs water molecules, changing its capacitance proportionally to relative humidity. A sigma-delta ADC digitizes both sensor outputs. An internal signal processing pipeline applies factory-calibrated correction coefficients for linearization and temperature compensation. The I2C interface provides access to raw and processed data. In single-shot mode, the MCU triggers each measurement; in periodic mode, the sensor auto-measures at the configured rate. The integrated heater can be activated to evaporate condensation on the sensor element.

Pin Description: SHT30-DIS-B Pin Definition and Functions
Pin Name Type Function
1 SDA I/O I2C data
2 ADDR Input I2C address select (0x44=GND, 0x45=VDD)
3 ALERT Output Alert output (programmable thresholds)
4 SCL Input I2C clock
5 VDD Power Supply voltage (2.15-5.5V)
6 nRESET Input Reset (active low, internal pull-up)
7 R – Reserved (leave floating)
8 VSS Power Ground
Application Scenarios: In which products and applications is SHT30-DIS-B used
  • Weather station and environmental monitoring node
  • HVAC duct and room humidity/temperature sensing
  • Consumer appliance (dryer, humidifier, dehumidifier)
  • Industrial process humidity control and logging
  • Smart home and IoT environment sensors
Alternative Models: What chips are recommended as replacements for SHT30-DIS-B
Manufacturer Part Number Package Notes
Sensirion SHT31-DIS-B DFN-8 +/-2% RH, +/-0.3C, same family
Sensirion SHT35-DIS-B DFN-8 +/-1.5% RH, +/-0.1C, premium
TI HDC2080DMBR DFN-6 +/-2% RH, +/-0.2C, smaller
TE Connectivity HTU21D DFN-4 +/-2% RH, +/-0.3C, compatible

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1