Opens in a new tab

SM8S33ATHE3/I

6000W unidirectional TVS, 33V VWM, 53.3V Vc, DO-218AB, AEC-Q101, -55 to 175C

4503

Effective Inventory

Image for reference only

Manufacturer Part:

SM8S33ATHE3/I

Package:

DO-218AB (SM8, 7.1×6.1×2.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Semtech SM8S33ATHE3/I is a 6000W peak pulse power unidirectional TVS diode for 24V automotive bus protection. 33V standoff voltage, 36.7V breakdown in a DO-218AB (SM8) package.

Key Specifications

Direction Unidirectional
Standoff Voltage (VWM) 33 V
Breakdown Voltage (VBR) 36.7V min, 40.6V max
Clamping Voltage (VC) 53.3V @ 112A
Peak Pulse Power (PPP) 6000 W (10/1000us)
Peak Pulse Current (IPP) 112 A
Leakage Current 1 uA max @ 33V
Operating Temperature -55 to +175C
Package DO-218AB (SM8, 7.1×6.1mm)

Features

  • 6000W peak pulse power
  • Unidirectional for DC line protection
  • AEC-Q101 automotive qualified
  • ISO 7637 load dump suppression
  • Low 1uA leakage at standoff
  • DO-218AB high-reliability package

Applications

  • 24V truck/bus battery line protection
  • Industrial 24V DC supply TVS
  • ISO 7637 Pulse 5a/5b suppression
  • Heavy-duty vehicle ECU protection
Product Introduction: SM8S33ATHE3/I Product Introduction

The SM8S33ATHE3/I from Semtech is a 6000W peak pulse power unidirectional TVS diode in an automotive DO-218AB (SM8) package. With 33V standoff voltage and 53.3V clamping voltage at 112A, it protects 24V automotive and industrial DC supply lines against load dump and transient events. The unidirectional configuration provides optimal protection for positive voltage rails. AEC-Q101 qualified with 1uA leakage current.

Working Principle: SM8S33ATHE3/I Working Principle

The SM8S33A uses a large-area silicon avalanche diode for high energy absorption. Below 33V standoff, the device presents high impedance. When a positive transient exceeds breakdown (36.7-40.6V), avalanche multiplication clamps to 53.3V at peak current. In reverse direction, the forward-biased junction conducts at ~0.7V for negative transients. The DO-218AB package provides excellent thermal transfer for dissipating transient energy.

Pin Description: SM8S33ATHE3/I Pin Definition and Functions
Pin Name Type Description
1 Anode I/O Ground/reference
2 Cathode I/O Protected positive line
Application Scenarios: In which products and applications is SM8S33ATHE3/I used
  • 24V truck battery bus TVS protection
  • Industrial 24V DC supply transient suppression
  • Heavy vehicle ISO 7637 load dump
  • Construction equipment ECU protection
Alternative Models: What chips are recommended as replacements for SM8S33ATHE3/I
Model Manufacturer Key Difference
SMBJ33A Littelfuse 600W, SMB package, lower power
5.0SMDJ33A Littelfuse 3000W, SMC package

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1