Opens in a new tab

SMAZ18-13-F

18V 500mW Zener diode, 5% tolerance, 20Ohm ZZT, SMA package, voltage regulation/protection

9507

Effective Inventory

Image for reference only

Manufacturer Part:

SMAZ18-13-F

Package:

SMA / DO-214AC (5.20 x 2.60 x 2.15 mm, surface mount)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SMAZ18-13-F from Diodes Incorporated is an 18V Zener diode in a SMA (DO-214AC) package. With 500mW power dissipation and tight 5% tolerance, it provides reliable voltage regulation and protection for electronic circuits.

Key Specifications

Zener Voltage (VZ) 18 V (+/-5%)
Power Dissipation 500 mW
Zener Impedance (ZZT) 20 Ohm (typical at IZT)
Reverse Leakage (IR) 0.1 uA (at VR = 13.7V)
Forward Voltage (VF) 0.9 V (at IF = 10mA)
Operating Temperature -65C to +150C

Features

  • 18V Zener voltage with 5% tolerance for precise regulation
  • 500mW power dissipation in compact SMA surface-mount package
  • 20 Ohm typical Zener impedance for stable voltage regulation
  • 0.1uA low reverse leakage current at 13.7V for minimal power waste
  • SMA (DO-214AC) package for automated pick-and-place assembly
  • AEC-Q101 qualified variant available for automotive applications

Applications

  • Voltage regulation and reference in power supply circuits
  • Overvoltage protection and input clamping
  • Signal clipping and voltage limiting in analog circuits
  • ESD and surge protection for low-speed I/O lines
Product Introduction: SMAZ18-13-F Product Introduction

The SMAZ18-13-F from Diodes Incorporated is an 18V Zener diode in a SMA (DO-214AC) surface-mount package, part of the SMAZ series of 500mW Zener diodes. The device provides a stable 18V breakdown voltage with +/-5% tolerance, suitable for voltage regulation, reference generation, and overvoltage protection. The 500mW power dissipation rating supports continuous Zener currents up to approximately 27mA (limited by P/V = 500mW/18V), adequate for most regulation and bias applications. The 20 Ohm typical Zener impedance at the test current ensures stable output voltage with reasonable load regulation. Reverse leakage current of 0.1uA at 13.7V (approximately 75% of VZ) minimizes power waste in always-on protection circuits. The SMA package provides a compact footprint (5.2mm x 2.6mm) compatible with automated surface-mount assembly, and its glass-passivated junction ensures reliable operation across the -65C to +150C temperature range. The -F suffix indicates lead-free (RoHS compliant) construction.

Working Principle: SMAZ18-13-F Working Principle

The SMAZ18-13-F operates in the reverse breakdown region for voltage regulation. (1) Reverse Bias: When reverse voltage applied across the diode reaches the Zener voltage (VZ = 18V), the diode enters breakdown and conducts current in the reverse direction while maintaining a relatively constant voltage across its terminals. This is the Zener effect for voltages below approximately 5V and avalanche multiplication for higher voltages (the 18V device uses avalanche breakdown). (2) Regulation: In a typical shunt regulator circuit, a series resistor limits the current through the Zener diode. The Zener maintains approximately 18V across the load, with excess current flowing through the diode. Changes in input voltage or load current are absorbed by varying the Zener current while the output voltage remains nearly constant. (3) Impedance: The 20 Ohm Zener impedance means the output voltage changes by approximately 20mV per mA change in Zener current. Lower impedance Zeners provide tighter regulation. (4) Forward Operation: Like any diode, the SMAZ18-13-F also conducts in the forward direction with approximately 0.9V forward voltage at 10mA.

Pin Description: SMAZ18-13-F Pin Definition and Functions
Pin Name Type Function
Cathode K Terminal Cathode (band marking, connects to positive for reverse bias)
Anode A Terminal Anode (connects to ground/negative for reverse bias)
Application Scenarios: In which products and applications is SMAZ18-13-F used
  • 18V voltage regulation and reference in power supply circuits with 5% tolerance
  • Overvoltage protection and input clamping at 500mW dissipation
  • Signal clipping and voltage limiting in analog circuits at 20 Ohm ZZT
  • ESD and surge protection for low-speed I/O lines in SMA package
Alternative Models: What chips are recommended as replacements for SMAZ18-13-F
Manufacturer Part Number Package Notes
onsemi 1SMA5930BT3G SMA 18V, 1.5W, higher power
Vishay SMAZ18-G3-18 SMA 18V, 500mW, equivalent
Nexperia BZX384-C18,215 SOD-323 18V, 300mW, smaller
Diodes Inc 1SMA5930BT3G SMA 18V, 1.5W, higher power

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1