Opens in a new tab

SMBJ15A

600 W unidirectional TVS diode, 15 V stand-off, 24.4 V clamp, SMB package

11000

Effective Inventory

Image for reference only

Manufacturer Part:

SMBJ15A

Package:

SMB (DO-214AA, 5.9 x 3.6 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SMBJ15A from Littelfuse is a 600 W unidirectional TVS diode in an SMB (DO-214AA) package, designed to protect sensitive electronics from voltage transients. It features a 15 V stand-off voltage, 16.7 V breakdown voltage, and 24.4 V clamping voltage at peak pulse current, complying with IEC 61000-4-2 and IEC 61000-4-5 surge standards.

Key Specifications

Stand-off Voltage (VRM) 15 V
Breakdown Voltage (VBR) 16.7 V to 18.5 V
Clamping Voltage (VCL) 24.4 V max @ 24.6 A
Peak Pulse Power (10/1000 us) 600 W
Leakage Current (IRM) 1 uA max @ VRM
Peak Pulse Current (IPP) 24.6 A
Directionality Unidirectional
Operating Temperature -55°C to 150°C (TJ)

Features

  • 600 W peak pulse power at 10/1000 us waveform
  • Low clamping voltage: 24.4 V at 24.6 A IPP
  • Low leakage current: less than 1 uA at stand-off
  • Unidirectional protection for positive transients
  • IEC 61000-4-2 ESD protection (30 kV air, 30 kV contact)
  • IEC 61000-4-4 EFT protection
  • IEC 61000-4-5 surge protection
  • Compact SMB (DO-214AA) surface-mount package

Applications

  • 15 V power supply rail protection
  • Automotive electronics surge protection
  • Industrial equipment ESD/surge protection
  • Communication line transient protection
Product Introduction: SMBJ15A Product Introduction

The SMBJ15A from Littelfuse is a 600 W unidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from electrostatic discharge (ESD), electrical fast transients (EFT), and surge events. With a stand-off voltage of 15 V and a clamping voltage of 24.4 V at the rated peak pulse current, the device is optimized for protecting 15 V power rails and signal lines. The SMB (DO-214AA) surface-mount package provides a compact footprint while maintaining the ability to handle 600 W peak pulse power at the standard 10/1000 us waveform. The unidirectional configuration clamps positive transient voltages while blocking in the reverse direction, making it suitable for DC power rail protection. The device complies with IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT), and IEC 61000-4-5 (surge) immunity standards, providing comprehensive transient protection in a single component.

Working Principle: SMBJ15A Working Principle

The SMBJ15A operates as a clamping device that transitions from high impedance to low impedance when the voltage exceeds the breakdown threshold: (1) Under normal operating conditions, with the supply voltage at or below the 15 V stand-off voltage, the TVS diode presents a very high impedance with leakage current below 1 uA, effectively invisible to the protected circuit. (2) When a transient voltage event causes the voltage to exceed the breakdown voltage (16.7 V to 18.5 V), the PN junction avalanches, conducting current and clamping the voltage to a maximum of 24.4 V at the rated peak pulse current of 24.6 A. (3) The device absorbs the transient energy and dissipates it as heat in the semiconductor junction. After the transient subsides, the TVS diode automatically returns to its high-impedance state. (4) The unidirectional configuration provides protection against positive transients only. In the forward direction, the device conducts like a normal diode at approximately 0.9 V. For bidirectional protection, the SMBJ15CA variant should be used.

Pin Description: SMBJ15A Pin Definition and Functions
Pin No. Pin Name Function
1 Cathode (K) Positive terminal; connects to the protected line
2 Anode (A) Negative terminal; connects to ground reference
Application Scenarios: In which products and applications is SMBJ15A used
  • 15 V DC power supply rail protection in industrial control systems where IEC 61000-4-2/4-5 surge compliance is required
  • Automotive electronics input protection for 12 V battery systems where load dump transients can exceed 40 V
  • Communication equipment power line protection where the 600 W rating handles indirect lightning surge events per IEC 61000-4-5
  • SMPS output overvoltage protection where low 1 uA leakage current ensures minimal impact on regulation accuracy
Alternative Models: What chips are recommended as replacements for SMBJ15A
Model Brand VRM VCL Package
SMBJ15CA Littelfuse 15 V 24.4 V SMB (Bidirectional)
SMBJ15A Vishay 15 V 24.4 V SMB
SMBJ15A onsemi 15 V 24.4 V SMB
P6SMB15A onsemi 15 V 24.4 V SMB
SM6T15A ST 12.8 V 21.5 V SMB

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1