Opens in a new tab

SMBJ20CA

Bidirectional 600W TVS diode, 20V standoff, 32.4V clamping, SMB package for surge and ESD protection

6606

Effective Inventory

Image for reference only

Manufacturer Part:

SMBJ20CA

Package:

SMB (DO-214AA)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SMBJ20CA is a Littelfuse bidirectional transient voltage suppressor (TVS) diode designed to protect sensitive electronics from voltage transients and ESD events. With a standoff voltage of 20V and 600W peak pulse power rating in an SMB (DO-214AA) surface-mount package, this device provides robust bidirectional protection for power rails and data lines.

Key Specifications

Standoff Voltage (VWM) 20V
Breakdown Voltage (VBR) 22.2V min / 24.5V max
Clamping Voltage (VC) 32.4V @ IPP
Peak Pulse Power (PPP) 600W (10/1000 µs)
Peak Pulse Current (IPP) 18.5A
Leakage Current (ID) 1 µA max @ VWM
Direction Bidirectional (CA)
Package SMB (DO-214AA)

Features

  • Bidirectional protection for AC and DC signal lines
  • 600W peak pulse power dissipation for robust surge protection
  • Low clamping voltage (32.4V) ensures effective protection of downstream components
  • Low leakage current (1 µA max) minimizes power consumption during normal operation
  • IEC 61000-4-2 ESD protection compliance (15kV air / 8kV contact)

Applications

  • 20V power rail transient protection in industrial equipment
  • RS-485 and CAN bus ESD and surge protection
  • Telecom line interface voltage transient suppression
  • Automotive electronic control unit (ECU) input protection
  • Solar panel and battery management system overvoltage protection
Product Introduction: SMBJ20CA Product Introduction

The SMBJ20CA is a Littelfuse bidirectional transient voltage suppressor (TVS) diode rated for 600W peak pulse power (10/1000 µs waveform) with a 20V working standoff voltage in an SMB (DO-214AA) surface-mount package. The bidirectional configuration (CA suffix) provides symmetrical clamping for both positive and negative transients, making it ideal for AC signal lines and differential data buses. The device clamps at 32.4V under peak pulse current (18.5A) and features ultra-low leakage current of 1 µA maximum at the standoff voltage.

Working Principle: SMBJ20CA Working Principle

The SMBJ20CA operates as a voltage-clamping device using avalanche breakdown in its PN junction. Under normal operating conditions (voltage below 20V standoff), the TVS presents high impedance with minimal leakage current (<1 µA). When a transient voltage exceeds the breakdown voltage (22.2-24.5V), the device enters avalanche conduction, shunting the transient current away from protected circuitry. The bidirectional configuration uses two back-to-back PN junctions to provide symmetrical clamping for both positive and negative transients, limiting the voltage to the clamping voltage (32.4V) during surge events.

Pin Description: SMBJ20CA Pin Definition and Functions
Pin Function
Cathode 1 Positive clamping terminal / anode of reverse junction
Cathode 2 Negative clamping terminal / cathode of forward junction
Application Scenarios: In which products and applications is SMBJ20CA used
  • 20V DC power rail protection against load dump and inductive transients
  • RS-485 transceiver bus ESD and surge protection on differential lines
  • Automotive CAN bus transient suppression in vehicle networks
  • Telecom SLIC interface overvoltage protection
  • Solar panel string reverse voltage and lightning surge protection
Alternative Models: What chips are recommended as replacements for SMBJ20CA
Model Manufacturer Key Difference
SMBJ20A Littelfuse Unidirectional version
SMBJ20CAQ Littelfuse AEC-Q101 automotive qualified
P6KE20CA STMicroelectronics 600W through-hole DO-15 package
SMBG20CA STMicroelectronics Equivalent SMB bidirectional TVS
SMBJ15CA Littelfuse Lower voltage variant (15V standoff)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1